/ Gently remove both covers with the fans /
/ Connect the 4-pin PWM Fan cable to the CPU fan socket on the mainboard /
D
/ Carefully place the Core Frozr XL on the CPU and secure it tightly using the screws
Make sure the pressure is applied evenly by fastening the screws diagonally /
(Do not fully screw in one side directly, or risk damaging the mounting kit)
LED Module:
/ Connect the USB cable of cooler to any JUSB (USB 2.0) pin header on the motherboard.
The JUSB pin header consists of 5 pins on top and 4 pins at bottom,
please connect the USB cable to 4 pin header /
*Please refer to manual for detail location of JUSB (USB2.0) connectors.
Personalize the LED effects by using Mystic Light,
Download link: https://www.msi.com/Graphics-card/CORE-FROZR-XL.html#down-utility
Step10-AMD
Heatsink Body X1
Fan Y-cable X1
Mylar Film X1
Back Plate Cap X1
Chill Factor X1
Screw Nut X4
LGA2011 Screw
X
4
AMD Washer(Ф10) X4
Intel Washer(Ф 8 ) X4
M4 L14 Screw X2
(AM4 only , black)
M4 L14 Screw X2 (s
ilver)
M3 L8 Screw X4
M3 L12 Screw X4
Anchoring Mount X1
D
Mounting Plate X1
Metal Back Plate X1
D
USB cable
USB cable