Eizo S1902 User manual

Category
TVs & monitors
Type
User manual

This manual is also suitable for

Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and effective
usage.
Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC to using the monitor.
The latest User’s Manual is available for download from our web site:
http://www.eizo.com
2
[Location of the Caution Statements]
Ex. Height adjustable Stand
This product has been adjusted specically for use in the region to which it was originally shipped. If operated outside
this region, the product may not perform as stated in the specications.
Copyright© 2010-2014 EIZO Corporation All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation. EIZO Corporation is
under no obligation to hold any submitted material or information condential unless prior arrangements are made
pursuant to EIZO Corporation’s receipt of said information. Although every effort has been made to ensure that this
manual provides up-to-date information, please note that EIZO monitor specications are subject to change without
notice.
VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United States and other countries.
Windows, Windows Vista, Windows Media, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United
States and other countries.
Apple, Mac, Macintosh, iMac, eMac, Mac OS, MacBook, PowerBook, ColorSync, QuickTime, and iBook are registered trademarks of
Apple Inc.
EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiForce, RadiCS, RadiNET, Raptor, and ScreenManager are
registered trademarks of EIZO Corporation in Japan and other countries.
ColorNavigator, EIZO EasyPIX, EcoView NET, EIZO ScreenSlicer, i • Sound, Screen Administrator, and UniColor Pro are trademarks of
EIZO Corporation.
All other company and product names are trademarks or registered trademarks of their respective owners.
3
Noticeforthismonitor
This product is suited to general purposes like creating documents, viewing multimedia content.
This product has been adjusted specically for use in the region to which it was originally shipped. If the product is used
outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
Power cords provided with the product
Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a
stable display.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference
patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure
marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt to
brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the
dew condensation disappears, otherwise it may cause some damage to the monitor.
4
Cleaning
Attention
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or
panel, and also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
NOTE
• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.
Tousethemonitorcomfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
5
CONTENTS
CONTENTS
Noticeforthismonitor.............................................. 3
CONTENTS............................................................. 5
Chapter1 FeaturesandOverview..................... 6
1-1Features............................................................... 6
1-2ButtonsandIndicators....................................... 7
1-3FunctionsandBasicOperation......................... 8
Chapter2 SettingsandAdjustments.............. 10
2-1SetaSync-on-GreenSignal............................. 10
2-2SettingScreenResolution................................ 10
CompatibleResolutions/Frequencies............... 10
SettingResolution................................................11
2-3UtilityDisk.......................................................... 12
Disk contents and software overview ................ 12
To use ScreenManager Pro for LCD/EIZO
ScreenSlicer ..................................................... 12
2-4ScreenAdjustment............................................ 13
DigitalInput.......................................................... 13
AnalogInput........................................................ 13
2-5ColorAdjustment.............................................. 16
To select the display mode (FineContrast mode) ......
16
To
perform advanced adjustments .................... 16
Ad
justment items in each mode ........................ 16
To set/adjust color ............................................. 17
2-6Turningoffthemonitorautomatically
[OffTimer]...................................................... 18
2-7SettingAdjustmentMenuPosition
[MenuPosition].............................................. 18
2-8SettingPowerIndicatorON/OFF
[PowerIndicator]........................................... 18
2-9DisplayingMonitorInformation[Information]18
2-10SettingLanguage[Language]........................ 19
2-11SettingOn/Offfortheautomaticbrightness
adjustmentfunction
[AutoEcoView].............................................. 19
2-12Displayingthelevelofpowersavingby
EcoViewIndex................................................ 19
2-13LockingButtons.............................................. 19
To lock adjustments/settings in the Adjustment
menu ................................................................ 19
2-14
Enabling/DisablingDDC/CIcommunication
........ 20
2-15SettingEIZOlogodisplayON/OFF................ 20
2-16ResumingtheDefaultSetting[Reset]........... 20
To reset color adjustment values ....................... 20
To reset all adjustments to the factory default
settings ............................................................. 20
Chapter3 ConnectingCables.......................... 21
3-1ConnectingMultiplePCstotheMonitor........ 21
To switch the input signal .................................. 21
To set input signal selection [Input Signal] ........ 21
Chapter4 Troubleshooting............................... 22
Chapter5 Reference......................................... 24
5-1HowtoAttachtheOptionalArm...................... 24
5-2PowerSavingMode.......................................... 25
5-3Specications.................................................... 26
5-4Glossary............................................................. 38
5-5PresetTiming..................................................... 40
FCCDeclarationofConformity.......................... 41
HinweisezurAuswahldesrichtigenSchwenkarms
für
IhrenMonitor........................................................ 42
LIMITEDWARRANTY.......................................... 43
6
Chapter 1 Features and Overview
Chapter1 FeaturesandOverview
Thank you very much for choosing an EIZO color LCD monitor.
1-1Features
• Applicable to the resolution of 1280 × 1024
• Stereo speakers
• Power saving function
Suppressing the power consumption* reduces the carbon dioxide emissions.
This product is equipped with various power saving functions.
– Auto EcoView function
The sensor on the front side of the monitor detects the environmental brightness to
adjust the screen brightness automatically and comfortably.
Excessively high brightness may lead a damage to the natural environment as well
as to your eyes. Suppressing the excessively high brightness will be helpful to
reduce the power consumption and the damage to your eyes.
“2-11 Setting On/Off for the automatic brightness adjustment function
[Auto EcoView]” (page 19)
– EcoView Index function
This indicator shows the power saving ratio, power reduction and CO2 reduction
as a result of the brightness
of the monitor. You can realize the power consumption reduction by taking
consideration in the ratio of power saving.
“2-12 Displaying the level of power saving by EcoView Index” (page 19)
• FineContrast function to allow the best mode for screen display
– Features Paper mode showing a view when printed onto paper
“● To select the display mode (FineContrast mode)” (page 16)
• Portrait/Landscape display available (For height adjustable stand and EZ-UP
stand only)
• The software “ScreenManager Pro for LCD (DDC/CI)” to adjust the screen
using the mouse and keyboard is included
“2-3 Utility Disk” (page 12)
NOTE
For using the monitor with
“Portrait” position, the graphics
board supporting portrait display is
required. When placing the monitor in
a “Portrait” position, settings of your
graphics board need to be changed.
Refer to the manual of the graphics
board for details.
* Reference values:
S1701-X
Maximum power consumption
: 35W
(Luminance Max., at default
settings)
Standard power consumption: 19W
(100VAC, Luminance 120cd/m
2
, at
default settings)
Standard power consumption: 18W
(200VAC, Luminance 120cd/m
2
, at
default settings)
S1721-X
Maximum power consumption
: 35W
(Luminance Max., at default
settings)
Standard power consumption: 19W
(100VAC, Luminance 120cd/m
2
, at
default settings)
Standard power consumption: 19W
(200VAC, Luminance 120cd/m
2
, at
default settings)
S1902
Maximum power consumption
: 27W
(Luminance Max., at default
settings)
Standard power consumption: 15W
(100VAC, Luminance 120cd/m
2
, at
default settings)
Standard power consumption: 15W
(200VAC, Luminance 120cd/m
2
, at
default settings)
S1921-X
Maximum power consumption
: 37W
(Luminance Max., at default
settings)
Standard power consumption: 22W
(100VAC, Luminance 120cd/m
2
, at
default settings)
Standard power consumption: 22W
(200VAC, Luminance 120cd/m
2
, at
default settings)
7
Chapter 1 Features and Overview
1-2ButtonsandIndicators
Ex. Height adjustable Stand
Adjustment menu (ScreenManager*
1
)
1
9
10
14
1211
8765432
15
13
16
1 Sensor The sensor detects ambient brightness. Auto EcoView function (page 19)
2 EcoViewbutton Displays the setting menu of Auto EcoView and EcoView Index (page 19).
3 Volumecontrolbutton Displays the volume adjustment menu (page 8).
4
InputSignalSelectionbutton
Switches input signals for display.
5 Controlbuttons(Left,Right) • Displays the brightness adjustment window (page 8).
• Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu (page 9).
6 Enterbutton Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted.
7 Powerbutton Turns the power on or off.
8 Powerindicator Indicates monitor’s operation status.
Blue: Operating Orange: Power saving Off: Power off
9 Securitylockslot Complies with Kensington’s MicroSaver security system.
10
Stand
*
2
Used to adjust the height and angle of the monitor screen.
11
Powerconnector
Connects the power cord.
12
Inputsignalconnectors
Left: DVI-D connector/Right: D-Sub mini 15-pin connector
13 Stereominijack Connects the stereo mini jack cable.
14
Cableholder
Covers the monitor cables.
15
Speaker
Outputs audio source.
16
Headphonejack
Connects the headphones.
*
1
ScreenManager is an EIZO’s nickname of the Adjustment menu. See page 9 for how to use.
*
2
An optional arm (or an optional stand) can be attached by removing the stand section. (Refer to “5-1 How to Attach the Optional Arm” (page 24))
8
Chapter 1 Features and Overview
1-3FunctionsandBasicOperation
Toadjustthescreenandcolor
The Adjustment menu and the EcoView menu
cannot be displayed at the same time.
Setting On/Off for the automatic brightness
adjustment function
[Auto EcoView] ………………………… see page 19
1 Press
.
2 Change “On” and “Off” with
or
.
Displaying the level of power saving by EcoView
Index …………………………………… see page 19
Press to display the level of power saving mode.
EcoViewmenu
ColorAdjustment
To select the display mode (FineContrast mode)
……………………………………… see page 16
“Brightness,” “Contrast,” “Temperature,” and
“Gain” can be set for each mode (Custom/
EyeCare/Paper/Text/sRGB).
Settable functions vary with the display mode.
ResumptionofDefaultSetting
To reset color adjustment values
[Reset] ……………………………… see page 20
Mainmenu(Refertopage9foroperation)
1
ScreenAdjustment
(AutomaticAdjustment)
To adjust flickering and position
[Screen] …………………………… see page 13
To adjust color gradation automatically
[Range] …………………………… see page 15
(foranalogsignalinputonly)
2
ScreenAdjustment
(AdvancedAdjustment)
[Adjustmentmenu]
[At analog signal input] [At digital signal input]
To eliminate vertical bars [Clock*] see page 14
To remove flickering or blurring
[Phase*] ……………………………… see page 14
To correct screen position
[Hor. Position*] ……………………… see page 15
[Ver. Position*] ……………………… see page 15
To modify blurred characters/lines
[Smoothing] ………………………… see page 15
*
Items marked with * can be adjusted with analog
input.
BrightnessAdjustment
Press or to adjust brightness.
VolumeAdjustment
1
Press .
2
Press or toadjustvolume.
page13
page14
page16
9
Chapter 1 Features and Overview
Tomakeusefulsettings/adjustments
SettingInputSignalSelection
To set input signal selection
[Input Signal] ……………………… see page 21
OffTimerSetting
Turning off the monitor automatically
[Off Timer] …………………………… see page 18
SettingAdjustmentMenuPosition
Setting Adjustment Menu Position
[Menu Position] …………………… see page 18
PowerIndicatorSetting
Setting Power Indicator ON/OFF
[Power Indicator] …………………… see page 18
ResumptionofDefaultSetting
To reset all adjustments to the factory default
settings [Reset]
…………………… see page 20
BasicoperationofAdjustmentmenu
[DisplayingAdjustmentmenuandselectingfunction]
(1) Press
. The main menu appears.
(2) Select a function with
or , and press . The sub menu appears.
(3) Select a function with or , and press . The adjustment/setting menu appears.
(4) Adjust the selected item with or , and press . The setting is saved.
[ExitingAdjustmentmenu]
(1) Choose <Return> from the sub menu and press .
(2) Choose <Exit> from the main menu and press .
NOTE
The Adjustment menu can also be exited by pressing twice quickly.
Set a Sync-on-Green Signal [SoG]
…………………………………… see page 10
Locking Buttons [Adjustment Lock]
…………………………………… see page 19
Enabling/Disabling DDC/CI communication
[DDC/CI] ………………………… see page 20
Setting EIZO logo display ON/OFF
…………………………………… see page 20
Adjustmentmenu(Refertobelowforoperation)
Language
Setting Language [Language]
page19
Information
Displaying monitor information [Information]
page18
10
Chapter 2 Settings and Adjustments
2-1SetaSync-on-GreenSignal
When inputting a sync-on-green signal, the [SoG] setting for the monitor must be changed in advance according to the
procedure below (for analog signal).
(1) Press
to turn off the monitor.
(2) Press
holding down to turn on the monitor.
(3) Select “On” with or , and press .
2-2SettingScreenResolution
CompatibleResolutions/Frequencies
The monitor supports the following resolutions.
AnalogInput
Resolution Frequency
DotClock
640 × 480 (VGA, VESA)
~75 Hz
135 MHz (Max.)
720 × 400 (VGA TEXT)
70 Hz
800 × 600 (VESA)
~75 Hz
1024 × 768 (VESA)
~75 Hz
1152 × 864 (VESA)
75 Hz
1280 × 960 (VESA)
60 Hz
1280 × 1024 (VESA)
*
~75 Hz
DigitalInput
Resolution Frequency
DotClock
640 × 480 (VGA)
60 Hz
108 MHz (Max.)
720 × 400 (VGA TEXT)
70 Hz
800 × 600 (VESA)
60 Hz
1024 × 768 (VESA)
60 Hz
1280 × 1024 (VESA)
*
60 Hz
A graphics board in conformance with VESA standard is required.
* Recommended resolution (Set this resolution)
Chapter2 SettingsandAdjustments
11
Chapter 2 Settings and Adjustments
SettingResolution
When you connect the monitor to the PC and nd that the resolution is improper, or when you want to change the
resolution, follow the procedure below.
Windows8/Windows7
1. For Windows 8, click the “Desktop” tile on the Start Screen to display the desktop.
2. Right-click the mouse anywhere on the desktop except for icons.
3. From the displayed menu, click “Screen resolution”.
4. On the "Screen Resolution" dialog, select the monitor .
5. Click "Resolution" to select the desired resolution.
6. Click the [OK] button.
7. When a conrmation dialog is displayed, click [Keep changes].
WindowsVista
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Personalize”.
3. On the “Personalization” window, click “Display Settings”.
4. On the “Display Settings” dialog, select the “Monitor” tab and select desired resolution in the
“Resolution” eld.
5. Click the [OK] button.
6. When a conrmation dialog is displayed, click [Yes].
WindowsXP
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Properties”.
3. When the “Display Properties” dialog is displayed, click the “Settings” tab and select desired
resolution for “Screen resolution” under “Display”.
4. Click the [OK] button to close the dialog.
MacOSX
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog, select the “Display” tab and select desired resolution in the “Resolutions”
eld.
4. Your selection will be reected immediately. When you are satised with the selected resolution, close
the window.
12
Chapter 2 Settings and Adjustments
2-3UtilityDisk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
●
Diskcontentsandsoftwareoverview
The disk includes software programs for adjustment, and Users Manual. Refer to “Readme.txt” le on the disk for
software startup procedures or le access procedures.
Item Overview Windows Macintosh
A “Readme.txt” le
Screen adjustment pattern les Used when adjusting the image of the
analog signal input manually.
ScreenManager Pro for LCD
(DDC/CI)
A software for adjusting the screen using
the mouse and keyboard.
-
EIZO ScreenSlicer A software that divides a screen and
lays out multiple windows efciently.
-
User’s Manual of this monitor (PDF le)
●
TouseScreenManagerProforLCD/EIZOScreenSlicer
For the installation and use of ScreenManager Pro for LCD/EIZO SceenSlicer, refer to the respective Users Manual on
the disc.
13
Chapter 2 Settings and Adjustments
2-4ScreenAdjustment
DigitalInput
When digital signals are input, images are displayed correctly based on the
preset data of the monitor, but if characters and/or lines appear blurred, go to
step 6 “● To modify blurred characters/lines [Smoothing]” (page 15). When
performing more advanced adjustment, see “2-5 Color Adjustment(page 16) and
subsequent pages.
AnalogInput
The monitor screen adjustment is used to suppress ickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
the rst time or when the settings of the PC in use are updated.
The Self Adjust function works when all of the following conditions are
satised.
When a signal is input into the monitor for the rst time or when the
resolution or Vertical/Horizontal Frequency not displayed before is
set
When signals with the vertical resolution over 480 are input
If the screen is not displayed correctly even after performing the Self Adjust
operation, adjust the screen according to the procedures on the following pages
to use the monitor comfortably.
[AdjustmentProcedure]
1
Performtheautoadjustment.
Toadjustickering,screenposition,andscreensize
automatically[Screen]
(1) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Screen> menu appears.
(2) Select “Execute” with
or , and press .
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
If the screen is not displayed correctly even after adjusting in
step 1 above, perform the adjustments according to the
procedures on the following pages. When the screen is
displayed correctly, go to step 5 “● To adjust color gradation
automatically [Range]” (page 15).
2
Preparethedisplaypatternfortheanalogdisplayadjustment.
Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen
adjustment pattern les”.
Attention
Wait 30 minutes or more from
monitor power on before starting
adjustments. (Allow the monitor
to warm up for at least 30 minutes
before making adjustments.)
Attention
This function works correctly when
an image is fully displayed over
the display area. It does not work
properly when an image is displayed
only on a part of the screen (DOS
prompt window, for example) or
when a black background (wallpaper,
etc.) is in use.
This function does not work correctly
with some graphics boards.
NOTE
For details and instructions on opening
the “Screen adjustment pattern les”,
refer to the “Readme.txt” le.
14
Chapter 2 Settings and Adjustments
3
Performtheautoadjustmentagainwiththeanalogscreen
adjustmentpatterndisplayed.
Toadjustickering,screenposition,andscreensize
automatically[Screen]
(1) Display Pattern 1 of the “Screen adjustment pattern les” in full
screen on the monitor.
(2) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Screen> menu appears.
(3) Select “Execute” with or , and press .
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
If the screen is not displayed correctly even after adjusting in
step 3 above, perform the adjustments according to the
procedures on the following pages. When the screen is
displayed correctly, go to step 5 “● To adjust color gradation
automatically [Range]” (page 15).
4
Performadvancedadjustmentsforthefollowingusingthe
<Screen>menuoftheAdjustmentmenu.
Adjust the clock, phase and position, in this order.
Toeliminateverticalbars[Clock]
(1) Choose <Clock> from the <Screen> menu, and press
.
The <Clock> menu appears.
(2) Adjust the clock with or , and press .
The adjustment is completed.
Toremoveickeringorblurring[Phase]
Adjustable range: 0 to 63
(1) Choose <Phase> from the <Screen> menu, and press
.
The <Phase> menu appears.
(2) Adjust the phase with or , and press .
The adjustment is completed.
NOTE
Press the control button slowly so as
not to miss the adjustment point.
When blurring, ickering or bars
appear on the screen after adjustment,
proceed to “● To remove ickering or
blurring [Phase]” (page 14) to remove
ickering or blurring.
Attention
Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
NOTE
When vertical bars appear on the
screen after adjustment, go back to
“● To eliminate vertical bars [Clock]”
(page 14). (Clock Phase → Position)
15
Chapter 2 Settings and Adjustments
Tocorrectscreenposition[Hor.Position],[Ver.Position]
(1) Choose <Hor. Position> and or <Ver. Position> from the <Screen>
menu, and press
.
The <Hor. Position> or <Ver. Position> menu appears.
(2) Adjust the position with or to display the image properly
in the display area of the monitor.
The adjustment is completed.
5
Adjustthecolorgradation.
Toadjustcolorgradationautomatically[Range]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Display Pattern 2 in full screen on the monitor using the “Screen
adjustment pattern les”.
(2) Choose <Range> from the <Auto Adjustment> menu, and press
.
(3) Select “Execute” with
or , and press .
The output range is adjusted automatically.
(4) Close the Pattern 2.
6
Modifyblurredcharactersorlines.
Tomodifyblurredcharacters/lines[Smoothing]
When a image is displayed with a resolution other than the
recommendation, the characters or lines of the displayed image may
be blurred.
Adjustable range: 1 to 5
(1) Choose <Smoothing> from the <Screen> menu, and press
.
The <Smoothing> menu appears.
(2) Adjust the characters/lines with or , and press .
The adjustment is completed.
NOTE
Since the number of pixels and the
pixel positions are xed on the LCD
monitor, only one position is provided
to display images correctly. The
position adjustment is made to shiftn
an image to the correct position.
16
Chapter 2 Settings and Adjustments
2-5ColorAdjustment
●
Toselectthedisplaymode(FineContrastmode)
This function allows you to select the best display mode for monitor brightness,
etc.
FineContrast mode
Mode Purpose
Custom Available for making desired setting.
EyeCare
Allows the brightness to be set lower than possible with
other modes.
Paper
Reduce the contrast and color temperature to view the
result when printed on paper.
Text
Suitable for displaying texts for word processing or
spreadsheets.
sRGB
Suitable for color matching with sRGB compatible
peripherals.
(1) Choose <Color> from the Adjustment menu, and press .
(2) Choose <Color Mode> from the <Color> menu, and press .
The <Color Mode> menu appears.
(3) Select the mode with or , and press .
The setting completes.
●
To
performadvancedadjustments
Independent setting and saving of color adjustment are available for each
FineContrast mode.
●
Ad
justmentitemsineachmode
According to the FineContrast mode selected, the adjustable function differs.
: Adjustment available −: Invalid for adjustment
Icon Function
FineContrastmode
Custom EyeCare
Paper Text sRGB
Brightness
Contrast
Temperature
Gain
Reset
NOTE
“ScreenManager Pro for LCD”
allows you to select the FineContrast
mode automatically according to the
application used.
(Refer to “Chapter 3 Auto
FineContrast” on the Users Manual
for “ScreenManager Pro for LCD”.)
Attention
Wait 30 minutes or more from
monitor power on before starting
adjustments.
Perform the range adjustment rst
when adjusting color for analog input
signals.
(Refer to “● To adjust color gradation
automatically [Range]” (page 15).)
The same image may be seen in
different colors on multiple monitors
due to their monitor-specic
characteristics. Make ne color
adjustment visually when matching
colors on multiple monitors.
17
Chapter 2 Settings and Adjustments
Menu Description Adjustmentrange
Brightness
To adjust the full screen
brightness as desired
0 to 100%
NOTE
You can also adjust the brightness by pressing or
button while the adjustment menu is not displayed. Press
after adjustment.
Contrast
To adjust the contrast of the
image
0 to 100%
NOTE
In the contrast of 50%, every color gradation is displayed.
When adjusting the monitor, it is recommended to perform
the brightness adjustment which may not lose the gradation
characteristics, prior to the contrast adjustment. Perform the
contrast adjustment in the following cases.
When you feel the image is dark even if the brightness is
set to 100%. (Set the contrast to higher than 50%).
When you feel the image is bright even if the brightness is
set to 0%. (Set the contrast to lower than 50%).
Temperature
To select a color
temperature
Off, 5000K, 6500K, 9300K
NOTE
Setting the value to “Off” presents the natural color of the
panel.
The values shown in the Kelvin (K) are available only as
reference.
Gain
To adjust red, green, and
blue to a desired color tone
respectively
0 to 100%
Adjust the respective brightness of
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
Attention
This function does not enable to display every color gradation.
NOTE
Values shown in percentage are available only as reference.
When using the <Gain> setting, the <Temperature> setting is
set to “Off”.
The gain value may change depending on the value of the
color temperature.
Reset
To reset the color settings of the selected FineContrast mode to
the default settings
●
Toset/adjustcolor
(1) Choose <Color> from the Adjustment menu, and press .
(2) Select a desired function from the <Color> menu, and press .
The selected function menu appears.
(3) Adjust the selected item with or , and press .
The adjustment is completed.
NOTE
Using the “ScreenManager Pro for
LCD” allows you to perform the color
adjustment by using the mouse and
keyboard of your PC. The adjusted
status can be registered as a color data
and restore the data later. (Refer to
“Chapter 4 Color Adjustment” on the
Users Manual for “ScreenManager
Pro for LCD”.)
18
Chapter 2 Settings and Adjustments
2-6Turningoffthemonitorautomatically
[OffTimer]
This function allows you to switch the setting to turn off the monitor
automatically after a specied time has passed at the power saving mode.
Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min,
1-5h)
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Off Timer> from the <Others> menu, and press .
The <Off Timer> menu appears.
(3) Select “Enable” or “Disable” with or .
When selecting “Enable”, set a monitor Off time with or .
(4) Press .
The setting is completed.
2-7SettingAdjustmentMenuPosition
[MenuPosition]
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Position> from the <Others> menu, and press .
The <Menu Position> menu appears.
(3) Select a menu position with or , and press .
The setting is completed.
2-8SettingPowerIndicatorON/OFF
[PowerIndicator]
This function allows you to set the power indicator (blue) ON/OFF in the
monitor ON condition.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Power Indicator> from the <Others> menu, and press .
The <Power Indicator> menu appears.
(3) Select “Enable” or “Disable” with or , and press .
The setting is completed.
2-9DisplayingMonitorInformation
[Information]
This function allows you to display the input signal status, current resolution
and model name.
Information 1/3 : Input signal status, resolution and H/V frequency
Information 2/3 : Enable/Disable setting for DDC/CI, On/Off setting for
SoG (Sync-on-Green)
Information 3/3 : Model name, serial number and usage time
(1) Choose <Information> from the Adjustment menu, and press
.
The <Information> menu appears.
(2) Then, press to check settings, etc.
NOTE
The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
19
Chapter 2 Settings and Adjustments
2-10SettingLanguage[Language]
This function allows you to select a language for the adjustment menu or
displaying message.
Selectablelanguages
English/German/French/Spanish/Italian/Swedish/Simplied Chinese/
Traditional Chinese/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
.
The <Language> menu appears.
(2) Choose a language with or , and press .
The setting is completed.
2-11SettingOn/Offfortheautomatic
brightnessadjustmentfunction
[AutoEcoView]
The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably by using the Auto
EcoView function.
(1) Press .
The <Auto EcoView> menu appears.
(2) Select “On” or “Off” with or , and press .
The setting is completed.
2-12Displayingthelevelofpowersavingby
EcoViewIndex
This indicator shows the power saving ratio, power reduction and CO2
reduction as a result of the brightness of the monitor.
(1) Press .
The EcoView Index menu appears.
The power saving ratio comes to high as the indicator level meter lights towards
right.
2-13LockingButtons
This function allows you to lock to prevent changing the adjusted/set status.
●
Tolockadjustments/settingsintheAdjustmentmenu
(1) Press
to turn off the monitor.
(2) Press holding down to turn on the monitor.
The Lock/Unlock setting is toggled by performing the operation in step 2.
NOTE
Be careful not to block the sensor on
the lower side of the monitor when
using the Auto EcoView function.
NOTE
Power reduction: the backlight’s
reduction of electricity consumption as
a result of the adjusted brightness value
CO2 reduction: converted from the
“Power reduction” value, this is
an estimate of the quantity of CO2
emissions reduced when using the
monitor for 1 hour.
* The numeric value is a result of a
calculation based on a default value
(0.000555 t -CO2/kWh) determined
by a ministerial ordinance (2006,
Ministry of Economy, Trade and
Industry, Ministry of Environment,
civil code article 3) and may differ
depending on country and year.
20
Chapter 2 Settings and Adjustments
2-14Enabling/DisablingDDC/CI
communication
This function allows you to enable/disable the DDC/CI communication.
(1) Press
to turn off the monitor.
(2) Press holding down to turn on the monitor.
The Enable/Disable setting is toggled by performing the operation in step 2.
2-15SettingEIZOlogodisplayON/OFF
The EIZO logo appears on the display when turning on the monitor. This
function allows you to display, or not, the EIZO logo.
(1) Press
to turn off the monitor.
(2) Press
holding down to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in step 2.
2-16ResumingtheDefaultSetting[Reset]
There are two types of Reset. One is to reset the color adjustment only to the
default settings, and the other is to reset all the settings to the default settings.
●
Toresetcoloradjustmentvalues
Only the adjustment values in the current FineContrast mode will revert to the
default settings (factory settings).
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Choose <Reset> from the <Color> menu and press .
(3) Select “Reset” with or , and press .
The color adjustment values revert to the default settings.
●
Toresetalladjustmentstothefactorydefaultsettings
Reset all adjustments to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Reset> from the <Others> menu, and press .
(3) Select “Reset” with or , and press .
All setting values revert to the default settings.
NOTE
You can check the DDC/CI setting in
the <Information> menu.
Attention
After resetting, you cannot undo the
operation.
NOTE
For default settings, refer to “Main
default settings (factory settings)”
(page 31).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53

Eizo S1902 User manual

Category
TVs & monitors
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI