Panasonic KXTG5673 Operating instructions

Category
Telephones
Type
Operating instructions

This manual is also suitable for

PQQW15083ZA DM1205SY0
Setting up
For further information, visit http://www.panasonic.com/phonehelp
Hook
OR
Base unit CHARGE 7 HOURS
Handset
Noise filter (For DSL Service users)
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
B
A
Charger
Press plug
firmly.
“Click”
(120 V AC, 60 Hz)
Charging
5
Use only the included Panasonic AC adaptor
PQLV1 or PQLV256.
Confirm
Charging” is
displayed.
KX-TG5672/KX-TG5673
Confirm CHARGE
indicator is on.
Model No. KX-TG5671
KX-TG5672
KX-TG5673
Quick Guide
TG567x_QG(e).fm Page 1 Tuesday, December 20, 2005 3:37 PM
2
Operating tips
{ }: shows button names.
Using the navigator key
After pressing {MENU} or {Phonebook}, the
handset navigator key can be used. Press {^}, {V},
{<}, or {>} to navigate through menus and to select
items shown on the display.
Adjusting audio volume
Press {^} or {V} repeatedly while talking.
Handset soft keys
The handset features 2 soft keys. By pressing a soft
key, you can select the feature shown directly above
it on the display.
{
Select},
{
Save},
{
OK} and additional other
functions are assigned to soft keys. Pay attention to
soft keys to find functions you need during handset
operation.
Date and time (Handset)
1 {MENU} i {4}
2 Enter the current month, day, and year by selecting 2 digits for each.
3 Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each.
4 Press {AM/PM} to select “AM” or “PM”. i
{
Save} i
{
OFF}
Adding items to the phonebook (Handset)
1 {Phonebook} i {Add}
2 Enter the name (max. 16 characters). i {Next}
3 Enter the phone number (max. 32 digits). i {Next} i
{
Save} i {OFF}
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
{V}
{^}
{<}
{>}
Rcvd Phone
K
calls book
L
5
TG567x_QG(e).fm Page 2 Tuesday, December 20, 2005 3:37 PM
3
Continue page 4.
Basic operation (Handset)
Feature Operation
Adjusting the receiver/
speaker volume
Press {^} or {V} repeatedly while talking.
Viewing the caller list and
calling back
Press {^} or {V} repeatedly to select the desired item. i
{C}
Ringer volume 1 {MENU} i {1}{1}
2 Select the desired volume. i
{
Save}
Answering call-waiting
call (2nd call)
Press {CALL WAIT} when you hear call waiting tone.
Basic operation (Base unit)
Feature Operation
Adjusting the speaker
volume
Press {^} or {V} repeatedly while talking.
Ringer volume Press {^} or {V} repeatedly to select the desired volume.
L To turn the ringer off, press and hold {V} until the unit
beeps 2 times.
Answering call-waiting
call (2nd call)
Press {CALL WAIT} when you hear call waiting tone.
Answering system (Base unit)
Feature Operation
Auto answer on/off {ANSWER ON}
Recording your greeting
message
(max. 2 minutes)
1 {GREETING REC}
2 Within 10 seconds, press {GREETING REC} again.
3 Speak clearly about 20 cm (8 inches) away from the MIC.
4 To stop recording, press {STOP}.
For further information, visit http://www.panasonic.com/phonehelp
TG567x_QG(e).fm Page 3 Tuesday, December 20, 2005 3:37 PM
4
Continued
Answering system (Base unit)
Feature Operation
Listening to new
messages
When the MESSAGE indicator flashes on the base unit,
press {MESSAGE}.
Listening to old
messages
When the MESSAGE indicator does not flash on the base
unit, press {MESSAGE}.
Erasing a message Press {ERASE} during playback.
Using the answering
system remotely
1 Dial your phone number from a touch tone phone.
2 After the greeting message starts, enter your remote
code. (Default remote code is “11”.)
L The unit plays back new messages.
L
After playing back new messages, the voice guidance starts.
3 Follow the voice guidance as necessary.
Frequently asked questions
Question Cause/solution
How can I increase
handset volume level?
L Press navigator key {^} repeatedly while talking.
Why is the conversation
noisy or cutting off?
L Try to relocate the base unit so that distance from location
to use the handset will be minimized.
L Send your unit to service, if your unit has same problem
when the handset is next to the base unit.
Can I add another
accessory handset to my
base unit?
L KX-TG5672
Yes, you can add up to 1 additional accessory handset.
L KX-TG5671/KX-TG5673
No accessory handset can be added for these models.
L To purchase accessory handset (KX-TGA560), please
visit: www.panasonic.com
Can I keep battery
charging all the time?
L You can leave handset on the base unit or charger
anytime. There is no damage to the battery.
How can I answer a call-
waiting call (2nd call)?
L Press {CALL WAIT} when you hear call-waiting tone.
For further information, visit http://www.panasonic.com/phonehelp
TG567x_QG(e).fm Page 4 Tuesday, December 20, 2005 3:37 PM
5
Quick troubleshooting
Place the handset on the base unit,
then check if CHARGE indicator is on.
CHARGE indicator is OFF.
CHARGE indicator
is ON.
Unplug and then plug AC
adaptor properly to both
the base unit and AC
outlet.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor
and insert the battery into the handset again. Try re-
registration as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
CHARGE indicator
is still OFF.
Re-registration
failed.
Re-registration
failed.
CHARGE
indicator is ON,
now.
Your telephone may need service. For further troubleshooting,
please visit http://www.panasonic.com/phonehelp
No link to base. Move closer to base, try again.
1 Handset shows:
OR
TG567x_QG(e).fm Page 5 Tuesday, December 20, 2005 3:37 PM
6
Quick troubleshooting
Lift up the handset from the base unit
or charger.
Press {C} (TALK) at the handset,
then check if the display shows
Talk”.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Dial tone is heard.
{C}
{s}
No link to base.
Move closer to
base, try again.
is displayed.
Talk” is
displayed.
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Try remedy for 1
on previous page.
Your telephone may
need service when
only back speaker
provides a dial tone.
2 No dial tone is heard from handset.
No link to base.
Move closer to
base, try again.
Talk
K
Slow Mute
L
Your telephone may need service.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
Still no dial tone
TG567x_QG(e).fm Page 6 Tuesday, December 20, 2005 3:37 PM
7
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the handset is
not registered to the base unit, register the handset.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
Handset
Press {MENU}, then press {0}{0}.
Handset
Press {OK}.
Base unit
L KX-TG5671
Press and hold {INTERCOM} until the
CHARGE indicator flashes.
L KX-TG5672/KX-TG5673
Press and hold {INTERCOM} until the
CHARGE indicator flashes, then press {1},
{2}, or {3}.
L Complete next step within 1 minute.
Refer to manual
to prepare base.
Then press OK
L
Refer to manual
to prepare base.
Then press OK
L
{MENU}
{OK}
TG567x_QG(e).fm Page 7 Tuesday, December 20, 2005 3:37 PM
1 Read this Quick Guide or Operating
Instructions
L If you lost Operating Instructions, you can download at
http://www.panasonic.com/phonehelp
2 Visit our website:
http://www.panasonic.com/phonehelp
L FAQs and troubleshooting hints are available.
3 Contact us via the web at:
http://www.panasonic.com/contactinfo
4 Call us at:
1-800-211-PANA (1-800-211-7262)
L Monday - Friday 9:00am - 9:00pm (EST),
Saturday/Sunday 10:00am - 7:00pm (EST)
To order a replacement battery,
please call: 1-800-332-5368
Or visit:
http://www.panasonic.com/batterystore
IMPORTANT!
If your product is not
working properly. . .
TG567x_QG(e).fm Page 8 Tuesday, December 20, 2005 3:37 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Panasonic KXTG5673 Operating instructions

Category
Telephones
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI