Sony MEX-BT2750 Operating instructions

Brand: Sony

Model: MEX-BT2750

Type: Operating instructions

Sony MEX-BT2750 lets you make hands-free calls and stream music wirelessly from your Bluetooth-enabled devices. With simple pairing, you only need to set it up once and your devices will connect automatically the next time. Listen to your favorite tunes while driving and easily control music playback and volume using your car's audio system.

SONY MEX-BT2750(GB,AR) 4-125-800-61 (1)SONY MEX-BT2750(GB,AR) 4-125-800-61 (1)

To do/

Press/

To receive a call

To end a call

or  /

To reject a call

×2 sec /

To redial

1  t

2 ×3 sec /

To transfer a call

×2 sec /

To do/

Press/

Listen

1  t

2 Start playback on the audio device.

Play back/pause (AVRCP)*

 (PAUSE)

Skip tracks (AVRCP)

./>

* The operation may differ depending on the audio device.

This “Quick Reference” manual is to remind you in case you happen to forget

how to use the Bluetooth function on this unit after you have already read the

supplied operating instructions. For full details on operation, see the supplied

operating instructions and the Bluetooth device operating instructions.



Pairing



First, register (“pair”) Bluetooth device (cellular phone, etc.) with this unit. Pairing is no

longer required after the first time.



Connection



Sometimes pairing allows to connect automatically. To use the device after pairing is made,

start the connection.



Handsfree Calling/Music Streaming

You can talk handsfree and listen to music when the connection is made.

Support site

Customers in Latin America:

http://esupport.sony.com/ES/LA/

Customers in Asia and Oceania:

http://www.sony-asia.com/section/support

http://www.sony-asia.com/caraudio/

Handsfree calling

Music streaming

3 steps to BLUETOOTH function

4-125-800-61(1)

Bluetooth

Audio System

Quick Guide for Bluetooth function

MEX-BT2750

SONY MEX-BT2750(GB,AR) 4-125-800-61 (1)SONY MEX-BT2750(GB,AR) 4-125-800-61 (1)

× 5 sec

XXXXXXX

DR-BT30Q

XPLOD

Select “XPLOD”

Passcode “0000”

Follow display directions

Pairing successful/

Unit operation/

ON (Bluetooth signal on/ )

× 3 sec

Connect to this unit using a cellular phone.

Connect to this unit using an audio device.

Note

You can connect from this unit to a Bluetooth device (refer to the operating instructions).

If you cannot connect from this unit to the Bluetooth device, start pairing again.

Icon status/

Lit

Bluetooth signal on

Flashing Pairing standby mode

None

Bluetooth signal off

Lit

Cellular phone connection successful

Flashing Unit connecting to cellular phone

None

No connection

Lit

Audio device connection successful

Flashing Unit connecting to audio device

None

No connection

Buttons and icons/

Bluetooth device operation/

Connection

Pairing

Buttons and icons

Sony MEX-BT2750 Operating instructions

Sony MEX-BT2750 Operating instructions

Sony MEX-BT2750 Operating instructions

Related papers