Kobalt KHT 240-06 User manual
- Category
- Cordless hedge trimmers
- Type
- User manual
This manual is also suitable for
kobalttools.com
1
AB141020
40 V HEDGE TRIMMER
ITEM #0651247
MODEL #KHT 240-06
Français p. 17
Español p. 33
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
kobalttools.com
2
TABLE OF CONTENTS
........ 2
Package Contents .................................................................................................................... 3
Safety Information .................................................................................................................... 6
Preparation ............................................................................................................................. 10
Know Your Hedge Trimmer ..................................................................................................... 10
Operating Instructions ............................................................................................................. 11
Care and Maintenance............................................................................................................. 13
Troubleshooting ..................................................................................................................... 14
Warranty .................................................................................................................................. 15
Replacement Parts List ........................................................................................................... 16
PRODUCT SPECIFICATIONS
COMPONENTS
Type
Blade length
Cutting capacity
Reciprocating speed
Weight (without battery)
SPECIFICATIONS
Cordless, battery-operated
24 in.
3/4 in.
2,800 SPM
5.49 lbs.
kobalttools.com
3
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Hedge Trimmer 1
B Scabbard 1
A
B
kobalttools.com
4
SYMBOL DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
SPM Strokes per minute
The number of back-and-forth strokes the blade makes
per minute
Alternating Current Type of current
Direct Current Type or a characteristic of current
Wet Conditions Alert Do not expose to rain or use in damp locations
Read the Operator’s
Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this product.
Safety Alert Precautions that involve your safety.
Keep Bystanders
Away
Keep all bystanders at least 50 ft. away.
Eye Protection
Always wear safety goggles or safety glasses with
side shields and, as necessary, a full face shield when
operating this product.
Ricochet
Thrown objects can ricochet and result in personal injury
or property damage.
Sharp Blade
Do not install or use any type of blade on a product
displaying this symbol.
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better
and safer.
SYMBOLS
kobalttools.com
5
SYMBOL SIGNAL MEANING
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with
this product.
Save these Instructions
• To avoid serious personal injury, do not attempt to use this product until you have read this
Owner’s Manual thoroughly and understand it completely. If you do not understand the warnings and
instructions in this Owner’s Manual, do not use this product. Call 1-888-356-2258 for assistance.
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and, when needed, a full face shield. We
recommend a wide vision safety mask for use over eyeglasses or standard safety glasses
with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
WARNING
kobalttools.com
6
Work area
• Keep your work area clean and well lit.
• Do not use in wet conditions.
• Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases,
or dust. Power tools create sparks which may ignite
the dust or fumes.
• Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you to
lose control.
Electrical safety
• A battery-operated tool with integral batteries or a
separate battery must be recharged only with the
specied charger for the battery. A charger that may be
suitable for one type of battery may create a risk of re
when used with another battery.
• Use a battery-operated tool only with specied battery. Use of any other batteries may create a risk
of re.
• Use only 40 V Kobalt batteries.
Personal safety
• Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not
use tool while tired or under the inuence of drugs, alcohol, or medication. A moment of inattention
while operating power tools may result in serious personal injury.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away
from moving parts.
• Be sure the Lock-out button and trigger switch are not depressed when inserting the battery.
• Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable
better control of the tool in unexpected situations.
Tool use and care
• Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is
dangerous and must be repaired.
• Remove battery from tool before making any adjustments, changing accessories, or storing the
tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
Read and understand all instructions. Failure to follow all instructions listed below may result in
electric shock, re and/or serious personal injury.
WARNING
SAFETY INFORMATION
Always wear eye protection. A hedge trimmer can throw foreign objects into your
eyes which could cause permanent eye damage. Always wear safety goggles with
side shields that are marked to comply with ANSI Z87.1. Ordinary eyeglasses have
only impact-resistant lenses; they are not safety goggles.
kobalttools.com
7
SAFETY INFORMATION
• Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
• When battery is not in use, keep it away from other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause sparks, burns, or a re.
• Check for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
• Use only accessories that are recommended by the manufacturer for your tool. Accessories that
may be suitable for one tool may create a risk of injury when used on another tool.
Service
• Tool service must be performed only by qualied repair personnel. Service or maintenance
performed by unqualied personnel may result in a risk of injury.
• When servicing a tool, use only identical replacement parts. Follow instructions in the Care and
Maintenance section of this manual. Use of unauthorized parts or failure to follow Care and
Maintenance instructions may create a risk of shock or injury.
For all garden tools
• Avoid dangerous environments. Don’t use tool in damp or wet locations.
• Don’t use in rain.
• Keep bystanders and children away while operating.
• Dress properly. Do not wear loose clothing or jewelry. They can be caught in moving parts. Use
of work gloves and substantial footwear is recommended when working outdoors.
• Don’t grasp the exposed cutting blades when picking up or holding the tool.
• Don’t force the tool. It will do the job better and with less likelihood of a risk of injury at the rate for
which it was designed.
• Don’t overreach. Keep proper footing and balance at all times.
• When not in use, tool should be stored indoors in a dry, high, or locked-up place – out of reach
of children.
• Maintain tool with care. Keep cutting blades clean for best performance and to reduce the risk
of injury.
• Keep guards in place and in working order.
• Keep hands and feet away from cutting blades.
• Always use eye protection.
If the hedge trimmer blade cuts or becomes caught in electrical cords or wires, do not touch the
blade for any reason! It can be electrically live and cause serious or fatal injury! Release or
drop the trimmer in the quickest, safest way. If possible, disconnect power to the electrical circuit
affected, otherwise call an electrician, electrical contractor, or the power company for assistance.
Failure to heed this danger warning will cause serious personal injury and possible death.
Avoid serious injury: The blades coast after turning off. Always keep both hands on the hedge trimmer
handles to prevent your hand from touching the blade.
• Make sure the hedge trimmer switch is off and the battery removed when clearing jammed material
from blades. To avoid possible accidental start-ups, remove or disconnect the battery before
servicing, cleaning, or removing material from the hedge trimmer.
DANGER
WARNING
kobalttools.com
8
SAFETY INFORMATION
DANGER
• Do not operate the hedge trimmer when you are tired or your visibility is limited. Do not use the
trimmer at night or in reduced light.
• Keep the handles dry, clean, and free from oil and grease.
• Do not use the hedge trimmer if the handle guard is damaged.
To avoid serious injury, risk of re, explosion and danger of electric shock or electrocution:
• Do not probe the charger with conductive materials. The charging terminals hold 120 V.
• If the battery case is cracked or damaged, DO NOT insert into the charger or tool. Replace the
battery.
• Do not charge these batteries with any other type of charger.
• Do not allow liquid inside the charger.
• Do not try to use the charger for any other purpose than what is presented in this manual.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending on how often you do this type of work.
To reduce your exposure to these chemicals, work in a well-ventilated area, and work with approved
safety equipment, such as dust masks that are specially designed to lter out microscopic particles.
WARNING (PROPOSITION 65)
kobalttools.com
9
SAFETY INFORMATION
WARNING
Read and understand all instructions. Failure to follow safety rules listed below may result in
electric shock, re, and/or personal injury:
• Do not place the charger where the power cord might be stepped on, tripped on, or subjected
to damage.
• A battery-operated tool with integral batteries or a separate battery must be recharged only with the
specied charger for the battery. A charger that may be suitable for one type of battery may create a
risk of re when used with another battery.
• Use a battery-operated tool only with the specically designated battery. Use of any other batteries
may create a risk of re.
GROUNDING
In the event of a malfunction or breakdown, grounding provides the path of least resistance for electric
current, and reduces the risk of electric shock.
This battery charger is double insulated and has a two-prong polarized plug (one blade is wider
than the other). This plug will t into a polarized outlet only one way. If the plug does not t fully in the
outlet, reverse the plug. If it still does not t, contact a qualied electrician to install the proper outlet.
DO NOT change the plug in any way. IN ALL cases make sure the outlet is properly grounded. If you
are not sure, have a certied electrician check the power outlet.
2-prong
polarized plug
Properly
grounded
outlet
kobalttools.com
10
PREPARATION
Make sure all parts are present. Compare parts with package contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Remove the hedge trimmer from the box, then remove scabbard and place the charged battery in the
hedge trimmer before beginning operation.
Estimated Assembly Time: 2 minutes
KNOW YOUR HEDGE TRIMMER
PART DESCRIPTION
E Auxiliary handle
F Lock-out button
G Trigger switch
H Blade
I Blade support rod
J Guard
K Battery release button
L Trigger handle
UNPACKING
• This product requires no assembly.
• Carefully remove the product and any accessories from the box. Make sure that all items listed in
the Package Contents list are included.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated
the product.
• If any parts are damaged or missing, please call
1-888-3KOBALT
(1-888-356-2258) for assistance.
H
G
E
J
I
F
K
L
kobalttools.com
11
KNOW YOUR HEDGE TRIMMER
To install the battery:
1. Align the battery (not included) with the cavity in the
housing.
2. Insert battery in the housing until battery release button
(K) locks into place. You should hear a “click” once it is
installed.
To remove the battery:
1. Press the battery release button (K) on the hedge
trimmer.
This will cause the battery to raise out of the tool
slightly.
2.
of the tool.
IMPORTANT: The battery may not be fully charged
when purchased. Before using the hedge trimmer for the
charge. Make sure to read all safety precautions, and fol-
low the instructions in the battery and charger manuals.
1
OPERATING INSTRUCTIONS
WARNING
To avoid personal injury:
• Handle the blade with care.
•
could get pinched or cut.
• Never service the blade or hedge trimmer unless the battery is removed.
• Always keep both hands on the hedge trimmer handles to prevent your hand from touching
the blade.
The safe use of this product requires an understanding of the information on the product and in
this operator’s manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
Guard
The guard (J) helps prevent the operator’s hands from slipping into the blades.
Trigger switch
The lock-out button (F) must be pressed either to the left or the right before the trigger switch (G) can
be depressed. The lock-out button (F) can be released after the tool has started.
K
BATTERY
kobalttools.com
12
V
OPERATING INSTRUCTIONS
1. Place one hand on the trigger handle (L). Place the
other hand on the auxiliary handle (E).
2. Press the lock-out button (F) toward the handle and
hold.
3. Squeeze the trigger switch (G). The hedge trimmer will
turn ON.
4. Release the lock-out button (F). The hedge trimmer
will stay on as long as the trigger switch (G) on the
trigger handle (L) is squeezed ON.
5. The hedge trimmer will stop if you release the trigger
switch (G).
IMPORTANT:
If the hedge trimmer is accidentally dropped, the unit will turn off and the blades
will coast to a stop. The hedge trimmer will then be locked off.
On/Off Switches
The hedge trimmer has one switch control and a
lock-out button used together to prevent accidental
start-ups or injury.
2
WARNING
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or re:
• Replace the battery or the charger immediately if the battery case or charger cord is damaged.
• Verify that the trigger switch is in the OFF position before inserting or removing the battery.
• Verify that the battery is removed and the trigger switch is in the OFF position before inspecting,
adjusting, or performing maintenance on any part of the hedge trimmer.
• Read, understand, and follow the instructions contained in the charger manual.
G
E
F
L
kobalttools.com
13
Hedge Trimmer Blade Maintenance
Note: Before performing maintenance, remove the battery from the hedge trimmer.
CARE AND MAINTENANCE
1. Remove dirt and debris from blades using a small dry
paint brush or equivalent (not included).
3. After heavy use, it is recommended to thoroughly
check your blades for deformation or imperfections
and, if required, le edges to provide a sharper cut. If
necessary, it is recommended to take it to a qualied
technician to help sharpen blades. Always use a metal
le (not included).
2. Clean blades by spraying an appropriate degreaser
(not included) on the blades and cutting bar.
kobalttools.com
14
CARE AND MAINTENANCE
4. After each blade is sharpened, it is required to apply a
light machine oil or lithium based spray-on grease
(not included) to the blades.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Motor fails to start
when trigger switch
is depressed.
1. Battery is not secure.
2. Battery is not charged.
1. To secure the battery, make sure
the latch on the top of the
battery compartment snap into
place.
2. Charge the battery according to
the instructions included with your
model.
Motor runs, but
cutting blades do
not move.
1. Hedge trimmer damaged. 1. Do not use the hedge trimmer. Call
1-888-3KOBALT (1-888-356-2258)
for technical service.
Hedge trimmer
smokes during
operation.
1. Hedge trimmer damaged. 1. Do not use the hedge trimmer. Call
1-888-3KOBALT (1-888-356-2258)
for technical service.
Motor hums, blades
do not move.
1. Debris or other may be jamming
the blades
1. Remove battery, clear debris
blockage from blades.
If you still have questions or an unresolved issue after going through this troubleshooting guide, or
just want to speak to a Kobalt product expert, please call our customer service department at
1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday – Friday.
kobalttools.com
15
WARRANTY
5-YEAR HASSLE-FREE WARRANTY
This Kobalt 40 V Hedge Trimmer is warranted to the original purchaser from the original purchase
date for ve (5) years subject to the warranty coverage described herein.
This Kobalt 40 V Hedge Trimmer is warranted for the original user to be free from defects in material
and workmanship.
If you believe that the Kobalt 40 V Hedge Trimmer is defective at any time during the specied
warranty period, simply return the 40 V Hedge Trimmer along with proof of purchase to the place of
purchase for a free replacement or refund, or call 1-888-3KOBALT (1-888-356-2258) for warranty
service.
This warranty is void if: defects in materials or workmanship or damages result from repairs or
alterations which have been made or attempted by others or the unauthorized use of nonconforming
parts; the damage is due to normal wear, damage is due to abuse (including overloading of the tool
beyond capacity), improper maintenance, neglect or accident; or the damage is due to the use of the
tool after partial failure or use with improper accessories or unauthorized repair or alteration.
This warranty gives you specic legal rights, and you may also have other rights that vary from state
to state.
kobalttools.com
16
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-888-3KOBALT (1-888-356-2258),
8 a.m. - 8 p.m., EST, Monday - Friday.
PART DESCRIPTION PART #
AA Auxiliary handle/guard 34103896
Printed in China
Kobalt
®
is a registered trademark of LF, LLC. All Rights Reserved.
AA
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Kobalt KHT 240-06 User manual
- Category
- Cordless hedge trimmers
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kobalt KHT 2024A-03 User manual
-
-
-
-
-
-
-
-
-
