ICP DAS USA ZT-CHK Quick Start

ZT-CHK ZigBee Wireless Sniffer- QuickStart (Feb/2019)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

ZT-CHK

ZigBee Wireless Sniffer

Quick Start Guide

Product Website:

https://www.icpdas-usa.com/zt_chk

Introduction

The ZT-CHK module is a wireless sniffer that captures and analyze over-the-air data packets of

IEEE 802.15.4 standard in real-time with TI SmartRF Protocol Packet Sniffer (SPPS) software. It

is easy to install the ZT-CHK to PC by USB interface. With SPPS software, users can view or

store the wireless data packets in PC and these data packets are like ZigBee 2007 (ZigBee Pro).

This can be a good way for users to analyze the IEEE 802.15.4 data in their applications, and

reduce the wireless communication test time efficiently.

Download and Install Utility

1. Connecting to the website of TI, and download SmartRF Protocol Packet Sniffer.

http://www.ti.com/tool/packet-sniffer

2. Installing the SmartRF Protocol Packet Sniffer, and the driver of ZT-CHK will also be installed.

3. Insert the ZT-CHK into your computer, and you can find it in SmartRF Protocol Packet Sniffer.

4. Download and refer SmartRF™ Packet Sniffer User Manual to use.

http://www.ti.com/lit/ug/swru187f/swru187f.pdf