1. On/off button: Using this button, you can switch between on and standby mode of your STB.
2. Volume up/down: Using the volume up and down buttons, you can turn up/down the volume.
3. Indicator: Display the current status of STB. Green is on, Red is deep standby.
4. 7-Segment Display.
6. USB: One front USB is provided.
1. DC Power Jack : Connect the provided AC/DC adapter (3A@12V).
3. Composite Video & Audio L/R: Connect to TV using AV cable. Yellow is Composite Video, Red is audio right, white is audio left
.
2. ON/OFF: Power switch.
4. S/PDIF: Connect to a digital audio system using S/PDIF cable.
5. Terrestrial antenna power switch: Turn on when using active antenna, turn off when using passive antenna.
6. RF IN/LOOP OUT: Connect to Terrestrial cable or Cable TV.
7. LNB IN : One Satellite cable can be connected.
8. HDMI : Connect to TV using a HDMI cable for both audio and video signals.
9. Ethernet & USB: One Ethernet cable and one USB device can be connected.
Rear Panel
1 2 3 6 754
3
123456789
RF IN
1.3 Produc
t Descriptions
Front P
anel
5. IR Receiver :
Receive the IR signal from r
emote controller.
7. Smartcard reader slot :
One Smartcard slot is provided.