Salsbury Built-In Combination Lock Installation guide

Brand
Salsbury
Model
Built-In Combination Lock
Type
Installation guide
SALSBURY INDUSTRIES
18300 Central Avenue, Carson, CA 90746-4008
Phone: 1-800-562-5377
Fax: 1-800-562-5399
www.lockers.com
Int’l Phone: 323-846-6700
Int’l Fax: 323-846-6800
engineering@lockers.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2020 Salsbury Industries. All rights reserved. (05/05/2016)
Built-In Combination Lock – Model 77710
Installation Instructions
IMPORTANT: Front and back parts of locks must be installed paired as received. Mismatched pieces will not allow lock to function properly.
To Installer: Locking nuts are packed separately in a plastic bag containing sufficient nuts for all locks in each shipping case.
Built-in combination locks can be installed on lockers with a recessed hasp or lockers with a steel hasp.
Recessed Hasp Steel Hasp
Step 1
Open locker door, loosen and remove the nuts on
the back of the hasp. Then remove the lock
cover plate and the screws from the hasp.
Step 2
With dial on “0” at red marker, separate knob
assembly from case assembly. DO NOT
interchange knob assembly from one lock with
case assembly from another.
Step 3
With one hand, insert knob assembly (with red
dial marker up and dial at “0”) through holes on
locker door and into two holes on case assembly.
If assemblies do not fit together flush, turn knob
until assemblies become flush against the front
and back mating surfaces.
Step 4
Place locking nuts on screw bolts and tighten.
Lock is now ready to operate on original
combination. WARNING: If electric socket
wrench is used, do not exert excessive pressure.
  • Page 1 1

Salsbury Built-In Combination Lock Installation guide

Brand
Salsbury
Model
Built-In Combination Lock
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents