Holdrite 191 User manual

Type
User manual

This manual is also suitable for

.9
1/2" TUBE
1.2
3/4" TUBE
1.4
1" TUBE
.4
1.1
.4
1.3
.6
1.7
HOLDRITE #191, #192 & #193 Half S-Nail Clamps are ideal for "Surface Mounted"
positioning of 1/2", 3/4" & 1" CTS tubing (Copper, CPVC or PEX). The nail is pre-
loaded into the clamp for quick installation. Provides protection against tubing
damage caused by abrasion or contact between dissimilar metals.
Product Information:
Material:
Clamp: HDPE
Nail: Galvanized Steel
Temperature range: -10
to +180
F
Load rating: 25 lbs
UPC / IPC / IAPMO listed
Model #
Tube Size
191
1/2"
192
3/4"
193
1"
PRODUCT SPECIFICATION DRAWING
HOLDRITE® Half S-Nail Clamps
800-321-0316 OR 760-744-6944 / FAX: 760-744-0507 / WWW.RWC.COM
spec_Half S-Nail Clamps, RevA, 02-19-20
THIS INFORMATION IS PROPRIETARY TO RWC AND IS SUBJECT TO
CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN
PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.
  • Page 1 1

Holdrite 191 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI