Teufel CINEBAR LUX + BenQ TH685 Operating instructions

Brand: Teufel

Model: CINEBAR LUX + BenQ TH685

Category: Bluetooth music receivers

Type: Operating instructions

This manual is also suitable for

Cinebar LUX

2.1 Soundbar with wireless technology

Technical Description And User

Manual

Raumfeld

2 • Cinebar LUX

Contents

General Notes And Information....3

Notice ............................................ 3

Trademarks .................................. 3

Original packaging ........................ 3

Complaints .................................... 4

Contact .......................................... 4

For Your Safety ..............................5

Proper use ..................................... 5

Explanation of terms ..................... 5

Safety notes .................................. 6

Explanation of symbols ................ 9

Overview ......................................10

Unpacking....................................10

Package contents ....................... 10

Checking the package

contents ......................................10

Controls And Connections ..........11

Remote Control ...........................13

Inserting/changing the

batteries ...................................... 14

Setup/Wall Mounting ..................15

Setup location .............................15

Location tips ................................15

Wall mounting .............................15

Connecting ..................................17

TV set ...........................................18

HDMI source ...............................18

Optical-digital source ..................18

Analogue source .........................19

Subwoofer ...................................19

Network .......................................19

USB ..............................................19

Rear speakers .............................20

Power supply ...............................20

Ope ration .....................................21

Activating and deactivating ........21

Selecting a source ......................21

Adjusting the volume ..................22

Adjusting the volume of the

optional speakers ...................22

Mute ............................................22

Adjusting the sound ....................22

Equalizer ...................................... 23

Stereo widening ..........................23

Dolby Audio and Dolby mode......23

Menu ............................................24

“Sound” menu ........................25

“Speaker” menu ..................... 25

“System” menu .......................27

Spotify .........................................28

Setting up Raumfeld ...................29

Bluetooth

Mode .........................30

Bluetooth

options ......................30

Pairing and connecting ...............30

Playback ......................................31

Interruption of connection ..........31

Terminating the connection........ 31

Software Update .........................32

Installing new software

automatically ...............................32

Installing Updates without a

Connection to the Internet .........32

Care And Cleaning .......................33

Troubleshooting ..........................34

Technical Data .............................37

Declaration Of Conformity ..........37

3 • Cinebar LUX

General Notes And Information

Notice

The information in this document

may change without prior notice and

in no way constitutes any liability

on the part of Lautsprecher Teufel

GmbH.

No part of this user manual may

be reproduced in any form or be

broadcasted in any way electroni-

cally, mechanically, by photocopy or

recording without the written permis-

sion of Lautsprecher Teufel GmbH.

Version 1, May 2019

Trademarks

® All trademarks are the property of

their respective owners.

The Bluetooth

word mark and

Bluetooth

symbol are registered

trademarks of Bluetooth SIG, Inc.

and any use by Lautsprecher Teufel is

licensed.

The Spotify software is subject to

third-party licences, which are listed

here:

www.spotify.com/connect/third-

party-licenses

Manufactured under licence

from Dolby Laboratories.

Dolby, Dolby Audio, Pro Logic

and the double D symbol are

trademarks of Dolby Laboratories.

For DTS patents, see

http://patents.dts.

com. Manufactured

under license from DTS Licensing

Limited. DTS, the Symbol, DTS and

the Symbol together, and Digital

Surround are registered trademarks

or trademarks of DTS, Inc. in the

United States and/or other countries.

The HDMI and

High-Definition

Multimedia Interface terms as well

as the HDMI logo are trademarks

or registered trademarks of HDMI

Licensing Administrator Inc. in the

USA and other countries.

Original packaging

If you wish to exercise your eight-

week right of return, we ask that

you be absolutely sure to hold onto

the packaging. We can only accept

product returns with the ORIGINAL

PACKAGING.

Empty boxes are not available!

4 • Cinebar LUX

Complaints

In case of a complaint we will need

the following information to process

your enquiry:

1. Invoice number

Can be found on the sales slip

(enclosed with the product) or on the

order confirmation received as a PDF

document, e.g. 4322543

2. Serial number or batch number

Located on the back side of

the device, e.g. serial no.:

KB20240129A-123.

Thank you for your support!

Contact

Please contact our customer service

department with any questions,

suggestions, or complaints:

Lautsprecher Teufel GmbH

BIKINI Berlin

Budapester Str. 44

10787 Berlin (Germany)

Telephone: 00800 200 300 40 (toll-

free)

Fax: +49 (0)30 / 300 930 930

Online support:

www.teufelaudio.com/service

Contact form:

www.teufelaudio.com/contact

Before operating the product

for the first time, please read

the safety notes and user

manual carefully. This is the only way

to use all functions safely and reli-

ably. Store the user manual in a safe

place and also be sure to pass it on

to any subsequent owner.

NOTICE

Check that all items have

been delivered and that

nothing is damaged. If you

find any damage, do not

operate the device; instead

contact our customer service

department.

5 • Cinebar LUX

For Your Safety

Proper use

The speaker is designed for the play-

back of music and speech from an

external player.

Only use the speaker as described

in this user manual. Any other use

will be deemed as not in accordance

with the instructions and may lead to

damage to property or even persons.

The manufacturer accepts no liability

for damage caused by improper use.

The speaker is intended for private

use.

Explanation of terms

You can find the following signal

terms in this user manual:

WARNING

This signal term indicates a

moderate risk, which, if not

avoided, may result in severe

injury.

CA UTION

This signal term indicates a

low risk, which, if not avoided,

may result in minor or

moderate injury.

NOTICE

This signal term warns you of

potential damage.

6 • Cinebar LUX

Safety notes

This chapter contains general safety

notes which you should always

observe to protect yourself and third

parties. Also observe the warning

notes in each chapter of this user

manual.

WARNING

Touching live parts can result in

severe injury or death.

• Make sure that the correct voltage

is present. You can find more

information about this on the rating

plate.

• Check the device regularly for

damage.

Immediately disconnect the mains

plug and do not operate the device

if its housing, mains adapter or

mains cord is defective or exhibits

other visible damages.

• This device is disconnected from

the grid by pulling the mains plug.

Thus, make sure that the mains

plug is always easily accessible.

• If the device emits smoke, smells

burnt or produces unusual sounds,

immediately disconnect it from the

mains and do not operate it further.

• Never open the device housing.

Repairs may only be carried out by

an authorised specialist workshop.

Only parts that match the original

specifications may be used.

• Only use the accessory products

specified by the manufacturer.

• Only use the device indoors.

• Do not operate the device in wet

rooms and protect it from dripping

and splashing water.

Make sure that no vases or other

liquid-filled objects are located

on or near the device in order to

prevent liquid from penetrating the

housing. If water or other debris

ends up penetrating the housing,

immediately pull the mains plug

and, if applicable, take out any

batteries. Then send the device to

our service address.

• Never modify the device. Unauthor-

ised modifications may affect the

safety and functionality.

• Never touch the mains plug with

wet hands.

WARNING

An unsuitable setup location may

result in injury and damage.

• Never use the device unmounted

in vehicles, in unstable locations,

on wobbly tripods or furniture, on

insufficiently dimensioned brackets

etc. The speaker could tip or fall

down and cause injury to persons

or be damaged itself.

• Arrange the device so that it cannot

be knocked over accidentally and

make sure that the cables do not

pose a tripping hazard.

• Do not place the device and the

mains adapter near heat sources

(e.g. heaters, ovens, other heat

generating equipment such as

amplifiers etc.).

7 • Cinebar LUX

• Do not use the device in environ-

ments where there is a risk of

explosion.

• Only use the wireless function

(Bluetooth

, wireless subwoofer)

in locations where wireless radio

transmission is allowed.

WARNING

Children can become trapped in

the plastic wrapping when playing

and suffocate.

• Do not allow children to play with

the device or the plastic wrapping.

There is a danger of suffocation.

• Never allow children to operate

electrical equipment unsupervised.

WARNING

Swallowing a product battery may

result in severe internal injury or

even death.

• Store both new and used batteries

so that they are not accessible to

children.

• If it is no longer possible to safely

close the battery compartment,

stop using the remote control and

store it so that it is not accessible

for children.

• If you suspect that a battery has

been swallowed or otherwise

incorporated, promptly consult a

physician.

CA UTION

Leaking battery acid may lead to

chemical burns.

• Do not allow battery acid to come

into contact with skin, eyes or

mucous membranes. In the event

of contact with acid, immediately

flush the applicable areas with

plenty of clean water and consult a

physician if necessary.

CA UTION

Batteries (particularly lithium

batteries) can explode if used

improperly.

• Never attempt to recharge

batteries.

• Only use batteries of the same or

equivalent type.

• You must not heat or short circuit

batteries and rechargeable

batteries or dispose of them in fire.

• Do not expose batteries and

rechargeable batteries to direct

sunlight.

CA UTION

Extended listening at high volumes

may lead to hearing loss.

To avoid damage to health, avoid

extended listening at high volumes.

• When the volume is set high,

always keep a certain distance

from the device and never place

your ears directly on the speaker.

• If your amplifier is set to full

volume, it may produce very high

sound pressure. This may have

8 • Cinebar LUX

psychological consequences and

also cause physical injury. Children

and pets are particularly at risk. Set

your signal source device volume

to a low setting before turning on

the power.

CA UTION

This product contains magnetic

material.

• If necessary, consult your physician

and ask for effects on implants

such as pacemakers or defibrilla-

tors.

CA UTION

Improper use may lead to damage

or fire.

• Do not place open flames such as

burning candles or similar on the

device.

• Ensure sufficient ventilation.

• Do not place the device in direct

sunlight.

• Only use the device indoors.

• Do not operate the device in wet

rooms and protect it from dripping

and splashing water. Make sure

that no vases or other liquid-filled

objects are located on or near the

device in order to prevent liquid

from penetrating the housing.

CA UTION

The isolation pads can produce

discolouration on sensitive

surfaces.

• On parquet, varnished wood and

similar surfaces, you should stick

felt gliders to the rubber feet of the

device or put a blanket under it.

This will prevent discolouration of

the floor over the long term.

9 • Cinebar LUX

Explanation of symbols

Protection class II

Dual insulation

May only be used indoors

Risk of electrical shock –

do not open the housing.

Disconnect the mains cord

before changing a fuse.

Old devices must not be

disposed of with house-

hold waste!

Electrical equipment

contains harmful substances and

valuable resources.

Every consumer is required by law

to bring all old electrical devices to

an authorised collection or return

point so that they can be disposed

of in a manner that is environmen-

tally friendly and which preserves

resources.

You can hand old electrical devices

over to the local reusable materials/

recycling centre.

Please contact your vendor directly

for more information about this topic.

Batteries and recharge-

able batteries do not

belong in the household

garbage!

Every consumer is required by law

to bring all batteries and recharge-

able batteries, regardless whether

they contain harmful substances*)

or not, to a collection point run by

the communal authority or borough

or to a retailer, so that they can be

disposed of in an environmentally

friendly manner.

Please only turn in batteries and

rechargeable batteries which are

empty!

*) labelled with: Cd = cadmium, Hg =

mercury, Pb = lead

10 • Cinebar LUX

(1)

(2)

(3)

(4)

(5)

Overview

Unpacking

• Carefully open the box and care-

fully lift the device out of the box.

CAUTION

Risk of injury/damage!

The red rubber loops on the

back of the Cinebar LUX are

just cord holders.

– Do not use the loops to carry

the device!

Package contents

(1) 1× Cinebar LUX

(2) 1× remote control CB LUX RC

(3) 1× mains cord

(4) 2× AAA battery for the remote

control

(5) 1× allen key for opening the

battery compartment of the

remote control

Checking the package

contents

• Check that all items have been

delivered and that nothing is

damaged.

• If the delivery is incomplete or

exhibits damage from transport,

please contact our service depart-

ment (see Page 4).

• Do not in any case operate the

device if it is damaged.

Raumfeld

11 • Cinebar LUX

Back side

(6)

(7)

(14)(16)(13) (15)

(9)

(10)

(8)

(11) (12)

(13)

Controls And Connections

(6) HDMI IN – connection for an

external HDMI device

(7) HDMI TV – HDMI connection for

the TV set

(8) OPTICAL IN – input jack for opti-

cal-digital audio source device

(9) SUB OUT – output for the

subwoofer

(10) AUX IN – input jack for

analogue audio source device

(11) LAN – Network connector

(12) USB – USB port for loading

external players and for soft-

ware updates

(13) Keyhole openings for wall

mounting

(14) RESET – push button to reset

the device to the factory default

settings

(15) SETUP – push Button to start

Raumfeld setup

(16) POWER – connector jack for

the mains cord (3)

12 • Cinebar LUX

Front side

Raumfeld

(17) (18) (19) (20) (21) (22) (23)

(24)(25)

(17) – Short press select the Blue-

tooth source and initiate auto

reconnect.

Long press activates pairing.

(18)

– select a source

(19)

– control Bluetooth

device

and Raumfeld: skip forward

(20)

– start/pause playback,

switch the Cinebar LUX on and

activate last source

(21)

– control Bluetooth

device

and Raumfeld: skip back

(22)

– reduce the volume

(23)

– increase the volume

(24) Indication LED

(25) Text field for the menu and

information

13 • Cinebar LUX

Remote Control

(26) – select a source

(27)

– mute speaker

(28)

– increase the volume, navi-

gate through the menu

(29)

– decrease the volume, navi-

gate through the menu

(30)

– access the menu

(31)

– activate/deactivate

DYNAMORE stereo widening

(32)

– select Raumfeld source/

play last Raumfeld source

(33) MODE – adjust the sound

pattern: PURE (normal), VOICE,

NIGHT (night mode)

(34) 1 2 3 – select/set Raumfeld

favourites

(35)

– function button, program-

mable via the Raumfeld app.

Normal: Display information

about spatial sound, sound

pattern and system information

(36)

– select the Bluetooth

source, start pairing

(37)

– Back button

(38)

– confirm menu, control

Bluetooth

device and Raum-

feld: start/pause playback,

switch the Cinebar LUX on and

activate last source

(39)

– navigation button, control

Bluetooth

device and Raum-

feld: skip back

(40)

– navigation button

Control Bluetooth

device and

Raumfeld: skip forward

(41)

– switch the device on or to

standby

(26)

(27)

(28)

(29)

(38)

(40)

(39)

(31)

(33)

(36)

(37)

(41)

(34)

(35)

(30)

(32)

14 • Cinebar LUX

CAUTION

Leaking battery acid may lead

to chemical burns.

– Do not allow battery acid to

come into contact with skin,

eyes or mucous membranes.

In the event of contact with

acid, immediately flush the

applicable areas with plenty

of clean water and consult a

physician if necessary.

Batteries (particularly lithium

batteries) can explode if used

improperly.

– Never attempt to recharge

batteries.

– Only use batteries of the

same or equivalent type.

– You must not heat or

short circuit batteries and

rechargeable batteries or

dispose of them in fire.

– Do not expose batteries and

rechargeable batteries to

direct sunlight.

Inserting/changing the

batteries

The remote control is powered by 2

type AAA batteries.

You should change the batteries if the

remote control stops working properly

or after 2 years at the latest:

1. To open the

battery compart-

ment, take the

allen key (5) and

carefully screw

the lid off – it is

slightly under

tension from the

springs.

2. If applicable,

remove the old

batteries and

dispose of them

in an environ-

mentally-friendly

manner.

3. Slide the new batteries into the

battery compartment according

to the image on the back of the

remote control.

4. Screw the lid back closed – it only

fits the right way around and is

slightly under tension from the

springs.

(5)

15 • Cinebar LUX

Setup/Wall Mounting

NOTICE

If the device is subjected

to warm temperatures after

being cold (e.g. after trans-

port), condensation may occur

inside of it.

– In this case, wait approx. 2

hours before you connect

and activate it.

The isolation pads can

produce discolouration on

sensitive surfaces.

– On parquet, varnished wood

and similar surfaces, you

should stick felt gliders to the

rubber feet of the device or

put a blanket under it. This

will prevent discolouration of

the floor over the long term.

Setup location

The space in front of or under the TV

set is an ideal location.

Location tips

• Select a stable, level base.

In case of wall mounting, follow the

instructions in the next chapter.

• Make sure that the environment is

clean and free from dust.

• Select a location away from heat

sources and direct sunlight.

• Do not place any heavy objects on

the cables or the device.

Wall mounting

Proceed with care when mounting the

Cinebar LUX on the wall and follow

the instructions below.

You will need the following material

to mount the product on a solid stone

wall (not included in the package

contents):

• 2 dowels (ø 6 mm)

• 2 screws, 4 x 55 mm, screw head

ø 7–9 mm

16 • Cinebar LUX

CAUTION

Risk of injury/damage!

– Only qualified persons may

mount the Cinebar LUX on

the wall.

– The device may only be

mounted on a suitable,

solid wall. Special dowels or

anchors may be necessary

when mounting the product

on lightweight walls. Consult

a qualified professional in

this case.

– Make sure that there are no

cables or pipes in the drilling

areas. Before you drill, use a

metal detector to check the

applicable areas. Otherwise,

there is a risk of electric

shock/short circuit!

1. Space the two keyhole openings

(13) in the wall where you would

like to mount the Cinebar LUX at

a distance of 68cm apart. Use a

ruler, pencil and spirit level for this.

2. Use a metal detector to check the

drill areas. If necessary, select

another area for mounting.

3. Use an 6 mm rock drill to drill

holes, which are approx. 50 mm

deep, at the marked positions.

4. Insert 2 dowels (ø 6 mm) all the

way in the drill holes.

5. Screw one screw (4x55 mm)

into each dowel until there is

approx.13-15 mm of space

between the wall and the screw

head.

(13)

68 cm

6. Press the Cinebar LUX up against

the wall so that the screws vanish

in the keyhole openings (13).

7. Now pull the Cinebar LUX down so

that the screws slip into the small

slot.

8. If applicable, screw the screws

further in or out until the

Cinebar LUX is securely mounted

on the wall.

17 • Cinebar LUX

HDMI

AUDIO OUT

OPTICAL

Network router

Active or wire-

less subwoofer

Wireless rear

speakers

MP3 player/

smartphone

Video game console

TV set

USB stick or

harddisk

Connecting

18 • Cinebar LUX

(6)

(7)

(8)

CAUTION

Risk of injury/damage!

– Lay the cables so that

they do not pose a tripping

hazard.

TV set

If your TV is equipped with an ARC

capable HDMI jack, connect it via the

HDMI TV jack (7). You will need an

ARC capable HDMI cable for this.

The ARC (audio return channel) HDMI

function plays the television audio via

HDMI. With some TV sets, this func-

tion must be activated in the menu

and in most cases, only one HDMI

connection is ARC capable (see the

user manual for the TV set).

If your TV set does not support the

ARC HDMI function, you can also

connect it to the analogue AUX IN

(10) or to the digital OPT IN (8) input

depending on the configuration.

HDMI source

You can connect a source device with

digital sound and picture to the HDMI

IN jack (6) (e.g. a sat receiver, Blu ray

player, game console).

You do not also have to connect this

source device to your TV set. The

video signal from these devices is

looped through and forwarded to the

television set via HDMI TV (7).

Optical-digital source

You can connect the optical digital

sound output of a source device to

the OPT IN jack (8). You will need an

optical cable with a TOSLINK plug

for this. Your source device requires

either an optical 3.5 mm plug or also

a TOSLINK plug.

19 • Cinebar LUX

(9)

(10)

(11)

(12)

Analogue source

You can connect a source device with

analogue sound (e.g. a CD player

or TV set) to the AUX IN jack (10).

You will need a stereo cable with a

3.5-mm jack plug to do so.

Subwoofer

You can connect an active subwoofer

to the SUB OUT jack (9) using an RCA

cable.

If you use an active subwoofer with

a wireless connection, enable the

connection in the “Speaker” menu

(see page26).

Network

To integrate Teufel Streaming into

your network, you can use Wi-Fi or

the LAN network connector (11).

Connect the LAN jack (11) to your

router.

USB

The USB jack (12) is used for playing

audio files from an USB stick or

harddisk (5V, 500 mA) via Raumfeld

and for software updates (see page

32).

20 • Cinebar LUX

Rear speakers

If you use active speakers with a

radio connection (e.g. “Effect”),

enable the connection in the

“speaker” menu (see page 25).

Power supply

1. Insert the small plug of the

enclosed mains cord (3) in the

POWER jack (16).

2. Connect the mains cord with a

mains socket.

The Indication LED (24) starts to

pulse in white.

(16)

(3)

Raumfeld

(24)

(25)

Page is loading ...

Teufel CINEBAR LUX + BenQ TH685 Operating instructions

Brand: Teufel

Model: CINEBAR LUX + BenQ TH685

Category: Bluetooth music receivers

Type: Operating instructions

This manual is also suitable for

Download PDF

report

Teufel CINEBAR LUX + BenQ TH685 Operating instructions

This manual is also suitable for

Teufel CINEBAR LUX + BenQ TH685 Operating instructions

Related papers

Other documents