New Holland Snow Blowers –
Rear Two-stage Specifications
64CSR 74CSR 84CSR
Page 1 of 1
MODEL 64CSR 74CSR 84CSR
O
verall width, in. (mm) 64 (1626) 74 (1880) 84 (2134)
Cutting width, in. (mm) 64 (1626) 74 (1880) 84 (2134)
Cutting height, in. (mm) 26 (660) 26 (660) 34 (864)
Number of fan blades..............................................................................................................................................4..................................................................................................
Fan diameter, in. (mm) 24 (610) 24 (610) 28 (711)
Auger diameter, in. (mm) 15 (381) 15 (381) 20 (508)
Impeller drive....................................................................................................................................................#60 chain...........................................................................................
Manual chute rotation........................................................................................................................................Optional ............................................................................................
Hydraulic rotation ..............................................................................................................................................Optional ............................................................................................
Shear bolt protection.........................................................................................................................................Standard............................................................................................
Skid shoe - std. adjustable................................................................................................................................Standard............................................................................................
Hitch, driveline, chute (less rotation) ....................................................................................................................Yes ................................................................................................
Weight, lbs. (kg) 455 (206) 590 (268) 958 (435)
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).
/