Strait-Flex SM-100 Operating instructions

Type
Operating instructions

This manual is also suitable for

Strait-Flex SM-100S is a patented PVC tight fibered cotton composite corner tape designed for creating fast, perfect intricate off angles and inside 90° corners. It straightens small framing irregularities and forms easily to all angles and corners. The material is water-resistant, rustproof, and does not require fasteners, stapling, or special tools. It saves 25-50% on installation time and can be second coated immediately. Strait-Flex SM-100S comes with a lifetime warranty against edge-cracking when applied to a sound structure.

Strait-Flex SM-100S is a patented PVC tight fibered cotton composite corner tape designed for creating fast, perfect intricate off angles and inside 90° corners. It straightens small framing irregularities and forms easily to all angles and corners. The material is water-resistant, rustproof, and does not require fasteners, stapling, or special tools. It saves 25-50% on installation time and can be second coated immediately. Strait-Flex SM-100S comes with a lifetime warranty against edge-cracking when applied to a sound structure.

New Concept Drywall Products
MEDIUM
DESCRIPTION
(Speed,
Perfection and
Longevity)
Patented PVC tight fibered cotton composite corner tape that is 2 1/4” wide, .013” thick and
comes in 100’ rolls.
Strait-Flex Medium and Medium with Holes have recess running the length of tape, which
makes folding quick and is adjustable to any angle. Material is very stable with temperature
changes and is flexible while maintaining it’s rigidity when wet.
ADVANTAGES
Strait-Flex creates a fast, perfect intricate off angles and inside 90° corners. Straightens
small framing irregularities.
Forms easily to all angles and corners
Will not shrink, blister, tear, sag or wrinkle.
Water resistant and rustproof.
Saves 25-50% on installation time.
Material can be second coated immediately.
Solid rolls ensure no waste or damage in transit or in rough site conditions.
Does not require fasteners, stapling, or any special tools.
Resists common cracking problems as encountered when using paper tapes.
Requires very light fill coat to finish product. Medium with holes promotes quicker
drying time and easy detection of voids or air pockets behind tape.
WARRANTY
Strait-Flex products are backed by a lifetime warranty. When applied to a sound structure,
built on a permanent foundation using recommended application techniques, we warrant that
these products will not edge-crack for the lifetime of the structure. Contact Strait-Flex
International Inc for complete details.
DIRECTIONS
Cut Strait-Flex to desired length. Fold in half at center crease, and adjust to desired
angle.
Apply using a liberal coat of all-purpose compound with joint knife. Use tile setting
compounds in wet areas.
Press Strait-Flex into wet compound. Adjust if necessary to create straight line and
wipe down with joint knife. Immediately apply light skim coat and let dry.
Apply final coat, let dry and sand.
STORAGE
Store in dry place protected from moisture
Submittal Approvals:
Job Name:
Contractor:
Date:
  • Page 1 1

Strait-Flex SM-100 Operating instructions

Type
Operating instructions
This manual is also suitable for

Strait-Flex SM-100S is a patented PVC tight fibered cotton composite corner tape designed for creating fast, perfect intricate off angles and inside 90° corners. It straightens small framing irregularities and forms easily to all angles and corners. The material is water-resistant, rustproof, and does not require fasteners, stapling, or special tools. It saves 25-50% on installation time and can be second coated immediately. Strait-Flex SM-100S comes with a lifetime warranty against edge-cracking when applied to a sound structure.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI