a. Plug the 3.5 mm RCA connector to the antenna
terminal located on the rear panel of the radio.
1. Assembling Antenna
a. Assemble whip onto the magnet base as shown
in Figure A, B & C. Tighten securely by hand.
a. Clean the bottom of antenna mount and mounting
location before placing the magnetic base into
position. Note: The magnet will not stick on
aluminum or nonmetallic surfaces.
b. Hold antenna directly over mounting location and
carefully lower it into place.
2. To Mount Antenna
3. Connecting the Antenna to Radio
External
Weather/FM
Antenna
WHIP ANTENNA
SCREW IN ROD
MAGNETIC BASE
CONNECTOR
A
B
C
D
D
C
B
A