Insignia NS-M16LED10 is a portable LED video light that provides bright and vibrant lighting for enhancing the quality of photos and videos captured on your mobile device. It features:
- Three adjustable brightness modes (low, medium, high) to fine-tune the lighting intensity.
- Convenient 3.5mm connector to securely attach the light to your phone's headphone jack for precise alignment with your subject.
- Built-in rechargeable battery that eliminates the need to drain your phone's battery.
- Compact and lightweight design for easy portability, allowing you to take it with you wherever you go.
Insignia NS-M16LED10 is a portable LED video light that provides bright and vibrant lighting for enhancing the quality of photos and videos captured on your mobile device. It features:
- Three adjustable brightness modes (low, medium, high) to fine-tune the lighting intensity.
- Convenient 3.5mm connector to securely attach the light to your phone's headphone jack for precise alignment with your subject.
- Built-in rechargeable battery that eliminates the need to drain your phone's battery.
- Compact and lightweight design for easy portability, allowing you to take it with you wherever you go.
FEATURES
• Extremely bright and vibrant lighting for the
best possible quality from photos and videos
• Internal rechargeable battery does not drain
your phone battery
• Conveniently plugs into a headphone jack for
precise alignment with your subject
• 3 brightness modes (L - Low, M - Medium, H -
High) for ne tuning illumination
PACKAGE CONTENTS
• LED video light
• USB charging cable
• Quick Setup Guide
CHARGING THE BATTERY
1 Slide the power switch OFF.
2 Connect the USB charging cable from your video
light’s micro USB port to a power source (such as a
computer or USB power adapter (not included)).
The charging LED is red while charging, then turns
o when nished (about 2 hours).
USING YOUR VIDEO LIGHT
1 Connect the 3.5 mm connector to your mobile
device’s audio jack.
Note: The 3.5 mm connector is only used to secure
the light to your phone. It does not interface with
your phone. You may hold the light in your hand if
there is glare or your phone doesn't have a
headphone jack.
2 Slide the power switch ON.
3 Direct the video light at your subject and slide
the brightness switch to adjust the brightness,
as needed.
4 Use your mobile device to capture video or
images.
Before using your new product,
please read these instructions to prevent any damage.
Quick Setup Guide
|
NS-M16LED10
LED Video Light
Flat size (W×H): 12 x 4 in. (228.6 x 101.6 mm)
Flat size (W×H): 3 x 4 in. (76.2 x 101.6 mm)
Charging LED
3.5 mm connector
LED lights
Front
Left side: Right side:
Brightness
switch
Power switch
Micro USB port
Low 4 hours Medium 2 hours High 1 hour
Approximate Battery life (for each brightness setting)
NS-M16LED10_16-0083_QSG_V2_EN.ai 1 4/1/2016 11:25:09 AMNS-M16LED10_16-0083_QSG_V2_EN.ai 1 4/1/2016 11:25:09 AM
MAINTENANCE
• Do not squeeze or operate the video light with
excessive force.
• Keep the video light in a dry and cool place.
• To maintain battery life, charge the video light at
least once every ve months.
SPECIFICATIONS
SAFETY INFORMATION
• Keep the power switch in the OFF position when
the light is not in use.
• Do not store or transport when the LED light is
illuminated.
• There are no serviceable parts inside. Do not
disassemble.
LEGAL NOTICES
FCC Statement
CAN ICES-3 B/NMB-3 B
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
1. FCC Caution - §15.21:
Changes or modications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
2. FCC Statement - §15.105(b):
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
V2 ENGLISH 16-0083
2 × 1.9 × 0.5 in.
51 × 46.8 × 12.5 mm
17g (0.6 oz.)
Built-in lithium battery
3.7 V 200 mAh
Low: 4 hours
Medium: 2 hours
High: 1 hour
Approximately 2 hours (from
empty battery)
Dimensions (including
3.5mm plug)
Net weight
Battery
Approximate
battery life (for each
brightness setting)
Charge time
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies. Registered in
some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South,
Richeld, MN 55423 U.S.A.
©2016 Best Buy. All rights reserved.
Made in China
BC
NS-M16LED10_16-0083_QSG_V2_EN.ai 2 4/1/2016 11:25:09 AMNS-M16LED10_16-0083_QSG_V2_EN.ai 2 4/1/2016 11:25:09 AM
-
1
-
2
Insignia NS-M16LED10 is a portable LED video light that provides bright and vibrant lighting for enhancing the quality of photos and videos captured on your mobile device. It features:
- Three adjustable brightness modes (low, medium, high) to fine-tune the lighting intensity.
- Convenient 3.5mm connector to securely attach the light to your phone's headphone jack for precise alignment with your subject.
- Built-in rechargeable battery that eliminates the need to drain your phone's battery.
- Compact and lightweight design for easy portability, allowing you to take it with you wherever you go.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Insignia NS-MPKIT50 Quick setup guide
-
-
-
-
Insignia NS-P16AT10 User manual
-
-
-
-
-