2. Bunn-O-Matic
  3. CWTF-APS

Bunn-O-Matic CWTF-APS Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Bunn-O-Matic CWTF-APS Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
8. When brewing is complete,
discard the grounds and filter.
7. Momentarily press and release
the “START” switch.
6. Place “ON/OFF” switch in lighted
upper position.
5. Place an empty airpot under the
funnel.
4. Slide funnel into the funnel rails
of the brewer.
3. Shake funnel gently to level
grounds.
2. Pour in fresh coffee.1. Insert a
BUNN
®
filter into the
funnel.
CWTF APS Brewing Instructions
33929.0000B 10/01 ©2001 Bunn-O-Matic Corporation
BUNN
®
8. Use a clean damp cloth rinsed
in mild, non-abrasive detergent
to clean all surfaces.
7. Thoroughly rinse the entire
server.
6. Remove the pump tube assem-
bly.
5. Open the airpot by pressing the
buttons located on either side of
the nozzle and lifting.
4. Use a clean damp cloth rinsed
in mild, non-abrasive detergent
to clean all surfaces.
CWTF APS Brewer and Airpot
Cleaning Instructions
3. With the sprayhead removed,
insert the deliming spring all the
way into the sprayhead tube.
Move back and forth five or six
times. Replace sprayhead.
2. Clean mineral deposits and
rinse. Make sure all holes are
open.
1. Remove the sprayhead.
BUNN
®
33929 103001
/