Edlund EPP-410 Datasheet

Type
Datasheet

This manual is also suitable for

Increase Productivity and Better Yields. Edlund’s new 10 lb. (4.5 kg) and 15 lb. (6.8 kg) vegetable peeling machines are constructed from food
grade, non-corrosive aluminum alloy castings, with sealed bearings and integrally cast-spindle for long life and ease of maintenance. Available in
hardened gray painted or in a natural aluminum finish. Peelers can be bench or sinktop mounted, and the water inlet and waste discharge outlet can
be reversed for easy installation. Once again, Edlund sets the new benchmark in kitchen productivity.
10 lb & 15 lb Bench Potato and Vegetable Peeling Machines
SPECIFICATIONS:
MODEL # DESCRIPTION PRODUCT CODE WEIGHT OVERALL HEIGHT PEELING CHAMBER HEIGHT
EPP-410 10 lb Potato and Vegetable Peeler (Painted) 74050 60 lbs. (27 kg) 14.5" (370 mm) 12.5" (320 mm)
EPP-410 10 lb Potato and Vegetable Peeler (Aluminum) 74001 60 lbs. (27 kg) 14.5" (370 mm) 12.5" (320 mm)
EPP-415 15 lb Potato and Vegetable Peeler (Painted) 74099 66 lbs. (30 kg) 17.75" (450 mm) 15.25" (390 mm)
EPP-415 15 lb Potato and Vegetable Peeler (Aluminum) 74051 66 lbs. (30 kg) 17.75" (450 mm) 15.25" (390 mm)
All dimensions for machines are without discharge chute guard, but guard will protrude from end of chute by 5 inches (12.6 cm).
NOTE. Specifications of Edlund 10 lb and Edlund 15 lb are similar except for overall height of peeling chamber and weight.
EPP-415
15 lb Potato and Vegetable Peeler
EPP-415, 15 lb Potato and
Vegetable Peeler with chamber
door opened
EPP-415, 15 lb Potato and
Vegetable Peeler with chamber
door closed and discharge chute
guard off
The discharge shute guard protects the operator
by allowing the chamber door to be opened and
eliminates hand access to the peeling chamber.
Patented cast-in diamond-shaped abrasive serrations
decrease peeling time and increase yield. Diamond
serrations are designed to last the life of the unit
and never need replacement.
EPP-410
10 lb Potato Peeler
Discharge Chute
Guard
Waste Strainer Basket
Safety Discharge Chute
Guard Included
Edlund Company LLC, 159 Industrial Parkway, Burlington, VT 05401, USA 800-772-2126 www.edlundco.com
We’re in your kitchen.
WARRANTY INFORMATION: THE EDLUND COMPANY WARRANTS THESE PRODUCTS TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM DATE OF PURCHASE. THE COMPANY’S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING WITHOUT CHARGE ANY PART OR PARTS FOUND TO BE DEFECTIVE
UNDER NORMAL USE. IT IS THE RESPONSIBILITY OF THE PURCHASER TO RETURN THE ENTIRE UNIT TO THE FACTORY, TRANSPORTATION CHARGES PREPAID. THIS WARRANTY DOES NOT COVER PARTS THAT MUST BE REPLACED UNDER NORMAL USE, INCLUDING KNIVES AND DRIVE GEARS ON CAN OPENERS. NO OTHER WARRANTY, WRITTEN OR VERBAL, IS AUTHORIZED
BY THE COMPANY. WARRANTY INFORMATION OUTSIDE THE UNITED STATES MAY VARY, CONSULT YOUR DISTRIBUTOR.
06/11 EDL-1012
SPECIAL FEATURES
LUBRICATION. All bearings are grease-packed and permanently
sealed … NO LUBRICATION is required.
ROTOR PLATE. Coated on both sides, doubling the life of the rotor
plate. One side is coated with fine grained abrasive for thin
skinned potatoes and the other side coarse grained for thick
skinned potatoes.
PEELING CHAMBER. The inside wall of the peeling chamber has a
patented “diamond-shaped” cast-in abrasive serrations, which
decrease peeling time and increase yield. Diamond serrations
are designed to last the life of the machine.
CLEANING. Top casting is removable without tools and the rotor
plate can be lifted out with the supplied handle. Turn on water
and the machine is completely flushed clean.
FINISH. The machines are finished in high gloss gray paint or
natural aluminum. The top casting is a highly polished stain
resisting aluminum alloy casting, for easy cleaning and durability.
WATER INLET. 1/2 inch barbed fitting and hose connection with
spray nozzle included. Water inlet can be mounted on either
side of the machine for ease of installation.
WATER OUTLET. Tapped 1.5 inch B.S.P. ready for included waste
hose to be connected. Water outlet can be mounted on either
side of the machine for ease of installation.
MOTOR AND TRANSMISSION. Belt driven for noiseless transmission
and adjustable belt tensioning if required. Edlund 10 lb. 1/3 h.p.
Motor (180 watts) Edlund 15 lb – 1/3 h.p. Motor (250 watts).
WASTE DISPOSAL. Included waste trap straining basket to
separate peels from waste water.
Model EPP-415 Shown
  • Page 1 1
  • Page 2 2

Edlund EPP-410 Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI