2. Moen
  3. 2510
2510

Moen 2510, 2520, 62300, 62320, 82510, T944BN Specification

  • Hello! I am an AI chatbot trained to assist you with the Moen 2510 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
®
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
TUB
SHOWER
FLOOR
1/2" CC
SUPPLY
2-3/4" (70mm) C.C.
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2 1/2" MAX.
(63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
1 3/8"
(35mm)
FLOOR LINE
1 3/8"
(35mm)
L
C
1 1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
Rev. 3/00
POSI-TEMP
®
VALVE
Pressure-Balancing Valve
Models: 2520 (CC), 2510 (IPS) - Single Pack
62320 (CC), 62300 (IPS) - Bulk Packed
(Bulk packed 12 per carton)
NOTE: See reverse side
for illustrated parts
DESCRIPTION
• Brass construction
• 1/2" CC or IPS connections
• Pressure balancing, four port, cycle valve
OPERATION
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintain selected
discharge temperature to ± 2°F
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
/