American Standard Generations Storage Stool 9210.300, 9210.101, 9210.300, Generations Mirror 9210.101 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard Generations Storage Stool 9210.300 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
I17
© 2008 AS America Inc.





Available in a Warm Walnut nish

• Rectangular mirror with poplar solid frame
• Available in a Warm Walnut nish

25" x 1-3/4" (635 x 44mm)
34-3/8" height (873mm)

• Constructed of poplar solids and birch veneers
• White terry cloth top
• Top is hinged to allow compact storage within
• Available in a Warm Walnut nish

24" x 18" (610 x 457mm)
22-1/4" height (565mm)

• Constructed of poplar solids and birch veneers
• Matching rattan door inserts

16-1/2" x 15-3/4" (419 x 400mm)
44-1/4" height (1124mm)
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
Generations Mirror
 Generations Storage Stool
Warm Walnut
Revised 2/08
I18
© 2008 AS America Inc.
Generations Mirror
 Generations Storage Stool
25"
(635mm)
1-3/16"
(44mm)
1-1/4"
(32mm)
34-3/8"
(873mm)
BACK VIEW
FRONT VIEW
MEASURE D
MOUNTING
RING
HARDWARE
FOR MIRROR
MIRROR
SIDE VIEW
STOOL
SEAT LIFTS
OPEN TO
ACCESS
STORAGE
FRONT VIEW
24"
(610mm)
18"
(660mm)
22-1/4"
(565mm)
4-3/4"
(120mm)
37-1/2"
(953mm)
21-1/2"
(546mm)



 Generations Demi-Apothecary
SIDE VIEW
FRONT VIEW
15-3/4"
(400mm)
21-1/4"
(540mm)
4-3/4"
(120mm)
4-1/4"
(108mm)
44-1/4"
(1124mm)
10-1/2"
(267mm)
16-1/2"
(419mm)

*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P
TRAP ARE SUGGESTED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
 Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided pages.
Revised 2/08
/