Sparky MFD 16 User manual

Category
Measuring & layout tools
Type
User manual
MFD 16
www.sparkygroup.com
1202R01© 2012 SPARKY
www.sparkygroup.com
7 – 12
MULTIFUNKTIONS - DETEKTOR
Originalbetriebsanleitung
43 – 48
БАГАТОФУНКЦІОНАЛЬНИЙ ДЕТЕКТОР
Оригінальна інструкція з експлуатації
49 – 54
МНОГОФУНКЦИОНАЛЕН ДЕТЕКТОР
Оригинална инструкция за използване
37 – 42
МНОГОФУНКЦИОНАЛЬНЫЙ ДЕТЕКТОР
Оригинальная инструкция по эксплуатации
25 – 30
DETECTOR MULTIFUNCIONAL
Instrucciones de uso originales
13 – 18
DETECTEUR MULTIFONCTIONS
Notice originale
1 – 6
MULTI-FUNCTION DETECTOR
Original instructions
31 – 36
DETEKTOR WIELOFUNKCYJNY
Instrukcją oryginalną
19 – 24
MISURATORE MULTIFUNZIONALE
Istruzioni originali
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product fulls all the relevant provisions of the following directives and
the harmonized standards: 2004/108/EC, 2006/95/EC, EN 61326-1, EN 61326-2-2, EN 60825-1
Technical le is stored at SPARKY ELTOS AG, Koubrat Str. 9, 5500 Lovetch, Bulgaria.
KONFORMITÄTSERKLÄRUNG
Hiermit versichern wir unsere persönliche Haftung, dass dieses Erzeugnis allen einschlägigen Bestimmungen
folgender Richtlinien und entsprechender harmonisierten Standards entspricht: 2004/108/EC, 2006/95/EC,
EN 61326-1, EN 61326-2-2, EN 60825-1
Die technischen Unterlagen werden bei SPARKY ELTOS AG, Kubrat Str.9, 5500 Lovetch, Bulgarien, aufbewahrt.
DECLARATION DE CONFORMITE
Nous déclarons sous notre responsabilité que ce produit satisfait à l’ensemble des dispositions pertinentes de la
présente directives, respectivement aux normes harmonisées: 2004/108/EC, 2006/95/EC, EN 61326-1, EN 61326-2-2,
EN 60825-1
Le dossier technique est conservé par SPARKY ELTOS AD, 9, rue Kubrat, Lovech, Bulgarie.
DICHIARAZIONE DI CONFORMITÀ
Noi dichiariamo sotto la nostra personale responsabilità, che questo prodotto è in conformità a tutte le disposizioni
pertinenti della presente direttive e norme armonizzate: 2004/108/EC, 2006/95/EC, EN 61326-1, EN 61326-2-2,
EN 60825-1
Il fascicolo tecnico viene custodito presso la SPARKY ELTOS, 5500 Lovech, via Kubrat n. 9, Bulgaria
DECLARACIÓN DE CONFORMIDAD
Declaramos bajo nuestra exclusiva responsabilidad que este producto está conforme con todas las disposiciones
aplicables de la presente directrices aplicables y . las correspondientes normas armonizadas: 2004/108/EC,
2006/95/EC, EN 61326-1, EN 61326-2-2, EN 60825-1
El expediente técnico está archivado en SPARKY ELTOS SA, C/ Kubrat, 9, 5500 Lovech, Bulgaria.
DEKLARACJA ZGODNOŚCI
Niniejszym deklarujemy nas osobistą odpowiedzialnością, że ten produkt spełnia wszystkie odpowiednie
postanowienia następujących dyrektyw i harmonizowanych standardów: 2004/108/EC, 2006/95/EC, EN 61326-1,
EN 61326-2-2, EN 60825-1
Teczka techniczna przechowywana jest w SPARKY ELTOS AG, Kubrat Str.9, 5500 Lovetch, Bułgaria
ДЕКЛАРАЦИЯ О СООТВЕТСТВИИ
Мы заявляем со всей ответственностью, что данный продукт полностью соответствует всем соответствующим
требованиям действующих директив и гармонизированных стандартов: 2004/108/EC, 2006/95/EC, EN 61326-1,
EN 61326-2-2, EN 60825-1
Техническое досье хранится в СПАРКИ ЕЛТОС АД, ул. Кубрат №9, 5500 Ловеч, Болгария.
ДЕКЛАРАЦІЯ ПРО ВІДПОВІДНІСТЬ
Ми заявляємо під свою власну відповідальність, що даний продукт відповідає всім діючим вимогам директив і
гармонізованих стандартів: 2004/108/EC, 2006/95/EC, EN 61326-1, EN 61326-2-2, EN 60825-1
Технічне досьє зберігається в СПАРКИ ЕЛТОС АД, ул. Кубрат № 9, 5500 Ловеч, Болгарія.
ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ
Ние декларираме на своя лична отговорност, че това изделие отговаря на всички приложими изисквания
на следните директиви и хармонизирани стандарти: 2004/108/EC, 2006/95/EC, EN 61326-1, EN 61326-2-2,
EN 60825-1
Техническото досие се съхранява в СПАРКИ ЕЛТОС АД, ул. Кубрат №9, 5500 Ловеч, България.
Manufacturer
SPARKY Power Tools GmbH
Leipziger Str. 20
10117 Berlin, GERMANY
Signature of authorized person
A. Ivanov
Technical director of SPARKY ELTOS AG
18.10. 2011
11
Pantone 185 Black
Original instructions
EN
1
Contents
I - Introduction ...........................................................................................................................1
II - Technicalspecications .....................................................................................................2
III - Multi-function detector safety warnings .............................................................................3
IV - Know your product ...............................................................................................................3
V - Operation ..............................................................................................................................4
VI - Maintenance .........................................................................................................................5
VIII - Warranty.................................................................................................................................6
UNPACKING
Due to modern mass production techniques, it is unlikely that your product is faulty or that a part is
missing.Ifyoundanythingwrong,donotoperatetheproductuntilthepartshavebeenreplacedor
thefaulthasbeenrectied.Failuretodosocouldresultinseriouspersonalinjury.
ASSEMBLY
Themulti-functiondetectorispackedfullyassembled.
I – Introduction
YournewSPARKYmeasuringtoolwillmorethansatisfyyourexpectations.Ithasbeenmanufactured
understringentSPARKYQualityStandardstomeetsuperiorperformancecriteria.Youwillndyour
newtooleasyandsafetooperate,and,withpropercare,itwillgiveyoumanyyearsofdependable
service.
WARNING:
CarefullyreadthroughtheseOriginalInstructionsbeforeusingyournewSPARKYmeasur-
ing tool. Take special care to heed the Warnings. Your SPARKY measuring tool has many
featuresthatwillmakeyourjobfasterandeasier.Safety,performance,anddependability
havebeengiventoppriorityinthedevelopmentofthistool,makingiteasytomaintainand
operate.
Do not dispose of electric tools together with household waste!
Wasteelectricalproductsshouldnotbedisposedofwithhouseholdwaste.Pleaserecycle
wherefacilitiesexist.Checkwithyourlocalauthorityorretailerforrecyclingadvice.
ENVIRONMENTAL PROTECTION
Themeasuringtool,accessoriesandpackagingshouldbesortedforenvironmental-friendly
recycling.
Theplasticcomponentsarelabelledforcategorisedrecycling.
Donotdisposeofbatterypacks/batteriesintohouseholdwaste,reorwater.Batterypacks/
batteriesshouldbecollectedandrecycledinanenvironmental-friendlymanner.
MFD 16
EN
2
II- Technical specications
Model MFD 16
Distance measurement range 0.5 ÷ 16 m
Distance measurement accuracy ±0.5%(≥99.5%)
Distance measurement resolution 0.01 m
Temperature measurement accuracy ± 1ºC
Temperature range during operation 0 ÷ 50ºC
Power consumption ≤0.25W
Sound pressure frequency 3 KHz
Laser class 2
Laser type 650 nm, < 1 mW
Laserbeamdiameter(at25°C)at10mapprox. 1.5 mm
Battery 9V,6F22
Batterylife
- single measurements ~ 12600 measurements
- continuous measurements ~10.5 h
Detecting"live"1.5mm
2
wires≥~220V,atdepth ≥38mm
Detecting metal
-copper(Ø16x1mm),probingdepth ≥19mm
-ironpipe(Ø19x1mm),probingdepth ≥38mm
Detectingsoftwood,probingdepth ≥19mm
Detectinghardwood,probingdepth ≥32mm
Numberoflevelsfordetecting"live"wires,metal,softandhardwood 7
Continuous measurements Yes
MetricandBritishunitsconversion Yes
Temperature measurement Yes
Lowbatteryindication Yes
Automatic shutdown Yes
Backlitdisplay Yes
LCD display Yes
Weight(EPTAProcedure01/2003) 240 g
Safety class III
Protectiondegree(exceptforthebatterycompartment) IP 54
Original instructions
EN
3
III – Multi-function
detector safety
warnings
Before using the measuring tool, familiarize
yourself with all the operating features and safe-
ty requirements.
Themeasuringtoolisdeliveredwithawarning
labelinEnglish.Priortoinitialstarting,attach
the supplied sticker in your national language
overthewarninglabelinEnglish.
Donotdirectthelaserbeamatpersonsorani-
mals.Donotstareintobeam.
This measuring tool emits class 2 laser radia-
tionaccordingtoEN60825-1.Thiscanleadto
personsbeingblinded.
Max.radiantpower≤1mW
Wavelength650nm
EN60825-1:07
LASER BEAM
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Pay attention to the correct polarity when in-
sertingthebatteryaccordingtothemarkingin
thebatterycompartment.
Removethebattery fromthemeasuringtool
when not using it for more than 3 months to
prevent leak, and store it in a cool and dry
place.
Ifthebatteryisleaking,removethebattery,
wipe away the liquid from the compartment
withasoftclothavoidingcontactofyourskin
with electrolyte.
Do not allow children to use the laser measur-
ingtoolwithoutsupervision.Theycouldunin-
tentionallyblindotherpersonsorthemselves.
Themeasuringtoolmustberepairedonlyby
qualified technicians in authorised SPARKY
service centres using original spare parts
to ensure preserving the functions for safe
operation.
IV – Know your product
1. LCD
2. LED distance mode indicator
3. LED detector mode indicator
4. Bubblelevel
5. PUSHbutton
6. ON/OFFbutton
7. DegreesFanddegreesCconversion/
MetricandBritishunitconversion
8. Detector/Distancemeasurementmode
button
9. Distancemeasurementmodebutton
10. Dataaccumulation/equalbutton
11. Detectorbutton
12. Dataextractionbutton
13. Datamemorybutton
14. Laser emitter
15. Laserlinedevice
16. Ultrasonicdevice
17. Batterycover
18. Laserdevicelock
19. Distancemeasurementbutton
BUTTON FUNCTION
ON/OFF Switchingon/switchingoff
button
C/F Singlepressingthebuttondis-
plays temperature in degrees
Celsius,pressingthebutton
for the second time displays
temperature in degrees
Fahrenheit,pressingthe
buttonforthethirdtimereturns
temperature in degrees Celsius
again, etc., pressing DIbutton
clears the display.
DI/DE SwitchesbetweenDISTANCE
and DETECTOR mode
DE/MODE Scanning for soft wood, metal,
hard wood, AC current
(DI/MODEcannotbeper-
formed)
MFD 16
EN
4
BUTTON FUNCTION
M/FT Convertsbetweenmetricand
Britishunits(inapplicablefor
DE/MODE)
DI/MODE Selectsthemeasuringmode:
length, accumulating length,
areaorvolume(DE/MODE
cannotbeperformed)
RM Recalls the last stored data in
memory (DE/MODEcannotbe
performed)
READ Switches to measuring dis-
tance mode (DE/MODE cannot
beperformed)
PUSH Pressing the ON/MODEbutton
actuatestheprobe
In DETECTOR mode DI/MODE, READ, RM
and M/FTbuttonscannotbeactuated
In DISTANCE mode DE/MODE and PUSH
buttonscannotbeactuated
In C/F mode only DI/DE canbeactuated,the
restofbuttonscannotbeactuated
V – Operation
This measuring tool is radio suppressed in com-
pliancewithEMCDirective2004/108/EC.
This tool is designed for measuring distances,
accumulating lengths, widths, heights, calculat-
ing areas and volumes, detecting live” wires,
metal, soft and hard wood in walls, ceilings and
oors.Themeasuringtoolissuitableforinterior
andexteriorconstructionsitemeasuring,nish-
ingandrepairactivities.
LENGTH MEASUREMENT
Press ON/OFFbuttontoswitchonthede-
vice and then press MODEbuttontoselect
DISTANCE mode measurement.
Press READ
button
Measurement
begins
NO
NO
YES
YES
Thedeviceperforms
only 1 measurement
Thedistancevalue
appears on the display
Thedevice
measures distance
continuously
Haveyoupressed
READbuttonfor
less than 2 s?
Haveyou
released READ
button?
Thedevice
performs 2
measurements
per second
ACCUMULATING RESULTS
In this mode upon restarting data collection, the
new data are added to the old ones.
AREA MEASUREMENT
Once thedevice has been switched on,press
MODEbuttontoselectmeasuringarea/volume.
Press READbuttontomeasurethelengthL,
press READbuttonagaintomeasurethewidth
W. Then the second line of the screen will dis-
playthevalueofthearea.
VOLUME MEASUREMENT
Once thedevice has been switched on,press
MODEbuttontoselectmeasuringarea/volume.
Press READbuttontomeasurethelengthL,
press READbuttonagaintomeasurethewidth
W, press READbuttonforthethirdtimeto
measure the height H. Then the second line of
thescreenwilldisplaythevalueofthevolume.
MEMORY MODE
The result of the measurements is automatically
Original instructions
EN
5
saved.PressRMbuttontorecallthelaststored
data in memory.
DETECTING WOOD, METAL AND
“LIVE” WIRES
Turning on
SelectdetectionmodebypressingPUSHbut-
ton.
Detection
1.The devicecanbeoperatedin 4 detection
modes:STUD(softwood)/METAL(metal)/
DEEP(hardwood)/AC(alternatingcurrent).
Eachmodecanbeselectedbypressingthe
PUSHbuttonfor1÷3secondsandthede-
vicewillbeep.
2.Afterselectingthematerial tobedetected,
place the measuring tool on the surface and
move itslowly.Themeasuringtool detects
thepresenceofthespeciedmaterialinthe
points where maximum intensity is regis-
tered.
TEMPERATURE MEASUREMENT
Select temperature measurement by pressing
C/Fbutton.
LASER LINE
The measuring tool is equipped with a laser line
tocheckthesurfaceatnessandabuilt-inmag-
netforattachingthedevicetometalsurfaces.
ADDITIONAL INFORMATION
1.Theappearanceofbatterysymbol on
the display indicates battery voltage drop
under7V(±0.5V).Thebattery mustbere-
placed. The measuring tool will operate
within 5 minutes after the appearance of this
symbol.
2. Message “Err”willbedisplayedifyouat-
tempttocalculatevaluesbeyondthedevice
measurement range.
3.Thedevicedisplaysthevalue“0.00” during
therstmeasurement.
4.Thedevicewillbeepifthesignalishigh.
5.Ifyouhavenotpressedanybuttonforape-
riod exceeding 15 seconds the display will
turnoffand30secondlaterthedevicewill
enterstandbymode.
6.Uponplacingabatteryinthecompartment
the device starts to operate in measuring
mode.
7.Uponpressinganybuttonthedevicewillexit
standbymodeandwilldisplaythelastresult.
VI – Maintenance
Store and transport the measuring tool only in its
original packing.
Always keep the measuring tool clean. Use a
soft damp cloth and mild detergent to clean the
housing if necessary.
WARNING: Neverusealcohol,petrol
or other cleaning agent. Never use caustic
agents to clean plastic parts.
WARNING:Watermustnevercome
into contact with the tool.
MFD 16
EN
6
VII – Warranty
The guarantee period for SPARKY products is
determined in the guarantee card.
Faults due to normal wear, overloading or im-
properhandlingwillbeexcludedfromtheguar-
antee.
Faults due to defectivematerialsimplemented
as wellas defects in workmanship will be cor-
rected free of charge through replacement or
repair.
Thecomplaintsfordefective SPARKY product
willberecognizedifthemachineissentbackto
the dealer or is presented to the authorised war-
ranty servicecentre undismantled, in its initial
condition.
Notes
Carefully read the entire Original Instructions
beforeusingthisproduct.
The manufacturer reserves the right to make
changesandimprovementstotheproductsand
toalterspecicationswithoutpriornotice.
Specicationsmaydifferfromcountrytocoun-
try.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

Sparky MFD 16 User manual

Category
Measuring & layout tools
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI