Hamilton Beach 14348Z User manual

English .......................................................................................... 2

USA: 1-800-851-8900

Visit www.hamiltonbeach.com for our complete line of products and Use and Care

Guides – as well as delicious recipes, tips, and to register your product online!

Français ...................................................................................... 14

Canada : 1-800-267-2826

Rendez-vous sur www.hamiltonbeach.ca pour notre liste complète de produits et

de nos manuels utilisateur – ainsi que nos délicieuses recettes, nos conseils, et pour

enregistrer votre produit en ligne !

Español ...................................................................................... 29

En México: 01-800-71-16-100

¡Visite www.hamiltonbeach.com.mx para obtener nuestra línea completa de productos

y las Guías de Uso y Cuidado, además de deliciosas recetas, consejos, y para registrar

su producto en línea!

Irons

Fer à repasser

Planchas

840164202

Le invitamos a leer cuidadosamente este

instructivo antes de usar su aparato.

READ BEFORE USE

À LIRE AVANT UTILISATION

LEA ANTES DE USAR

840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 1

3

2

This product is intended for household use only.

WARNING! Shock Hazard: This appliance has a polarized plug (one

wide blade) that reduces the risk of electric shock. The plug fits only

one way into a polarized outlet. Do not defeat the safety purpose of

the plug by modifying the plug in any way or by using an adapter. If the

plug does not fit, reverse the plug. If it still does not fit, have an electri-

cian replace the outlet.

OTHER CONSUMER SAFETY INFORMATION

Please Read Before First Use

• During first use of the iron, it may appear to smoke. This will

stop and does not indicate a defect or hazard.

• Many irons spit or sputter during the first few uses with tap

water. This happens as the steam chamber becomes condi-

tioned. This will stop after a few uses.

• Steam vents should be cleared before first use. Prepare iron for

steam ironing; then iron over an old cloth for a few minutes

while letting iron steam.

IMPORTANT SAFEGUARDS

When using your flatiron, basic safety precautions should always be

followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

1. Use iron only for its intended use.

2. Verify that the voltage in your home corresponds to that of your

appliance.

3. To protect against risk of electric shock, do not immerse the iron

in water or other liquids.

4. The iron should always be turned to OFF before plugging or

unplugging from outlet. Never yank cord to disconnect from

outlet; instead, grasp plug and pull to disconnect.

5. Do not allow cord to touch hot surfaces. Let iron cool completely

before putting away. Loop cord loosely around iron when storing.

6. Always disconnect iron from electrical outlet when filling with

water or emptying and when not in use.

7. Do not operate iron with a damaged cord or if the iron has been

dropped or damaged. To avoid the risk of electric shock, do not

disassemble the iron. Call our toll-free customer service number

for information on examination and repair. Incorrect reassembly

can cause a risk of electric shock when the iron is used.

8. Close supervision is necessary for any appliance being used by

or near children. Do not leave iron unattended while connected

or on an ironing board.

9. Burns can occur from touching hot metal parts, hot water, or

steam. Use caution when you turn a steam iron upside down –

there may be hot water in the reservoir.

SPECIAL INSTRUCTIONS

1. To avoid a circuit overload, do not operate another high-wattage

appliance on the same circuit.

2. If an extension cord is absolutely necessary, a 10-ampere cord

should be used. Cords rated for less amperage may overheat.

Care should be taken to arrange the cord so that it cannot be

pulled or tripped over.

SAVE THESE INSTRUCTIONS!

840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 2

5

4

Parts and Features

The iron is equipped with a position sensor. If iron is left motionless,

it will turn off automatically and cool to room temperature.

To restart, move iron and allow it to reheat on heel position:

— Iron will reheat to the previously selected setting.

— Iron will lose memory when turned off ( O ) or unplugged.

The iron turns off automatically when left in these positions:

Iron Position

Inadvertently resting

on soleplate

Inadvertently resting

on either side

Resting on heel

Position Sensing Feature

Retractable

Cord*

Cord Release

Button*

Spray and

Blast of Steam

Buttons

Adjustable

Steam Dial

Water Tank

Fill Cover

Soleplate

Water Tank

Self-Clean

Button

Power Indicator

Lights (see inset)

Temperature

Settings

Button

(see inset)

Heel Rest

The light is . . . This means . . .

RED and Solid Power OFF ( O ). This light will

remain on until iron is unplugged.

RED and Blinking Iron was heating/reheating and went

to OFF ( O ). Iron will reheat when

moved.

GREEN and Solid Iron is heated and ready for ironing.

GREEN and Blinking Iron is preheating/heating.

*on selected models only

Motionless Time

30 seconds

15 minutes max

15 minutes

840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 4

6

7

To Dry Iron

1. Plug in iron.

2. Turn Adjustable Steam Dial to the (Dry Iron) position.

3. Set Temperature Settings to desired temperature. With iron

in an upright position, allow 3 minutes for iron to reach

desired temperature. Do not preheat iron with soleplate

facing down.

4. To turn iron off, set Temperature Settings to OFF ( O ).

The iron may be turned off by pressing the Temperature

Settings Button for 3 seconds.

To Steam Iron

1. Unplug iron. Open Water Tank Fill Cover. Using a cup,

slowly pour 6 ounces (3⁄4 cup) of tap water into the water

tank opening. Close Water Tank Fill Cover.

2. Plug in iron.

3. Set Temperature Settings to desired setting in steam

range. With iron in an upright position, allow 3 minutes for

iron to reach desired temperature. Do not preheat iron with

soleplate facing down.

4. Set Adjustable Steam to desired steam output.

5. To turn off, turn Adjustable Steam Dial to (Dry Iron). Set

Temperature Settings to OFF ( O ). (Iron may also be turned

off by pressing Temperature Settings Button for 3 seconds.)

6. Empty water from the iron following directions in “Care and

Cleaning.”

Water

Please use ordinary tap water. If you have extremely hard

water, alternate between tap water and distilled water for

use in the iron.

Adjustable Steam Dial

Provides minimum steam for wool or

maximum steam for linen. Set the dial

to to change to Dry Iron.

Blast of Steam and Spray Buttons

Push Blast of Steam Button for an extra

blast of steam. Push Spray Button to

release a fine spray of water for difficult

wrinkles in cotton or linen.

Blast of

Steam

Spray

Features (on selected models)

Retractable Cord

1. Pull cord to desired length. Do not

unwind cord beyond colored tape

indicator on cord.

2. To store cord, press and hold the

Cord Release Button while guiding

the cord into the storage area.

WARNING! To reduce the risk of

an eye injury, hold the plug while

retracting the cord.

840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 6

9

8

Temperature Settings

To Iron

Off

Nylon

Acrylic

Silk

Polyester

Rayon

Wool

Cotton

Linen

Ironing Instructions

Steam

Setting

Dry iron on the reverse side of the fabric.

Iron with fabric still damp.

Iron on the reverse side of fabric.

Steam iron on the reverse side of fabric.

Iron while still damp using steam

and/or spray.

Iron on reverse side of fabric while still

damp.

Vertical Steam

1. Follow Steps 1 through 4 in

“To Steam Iron.”

2. Hang garment in a location that is

not susceptible to damage from heat

or moisture. Do not hang in front of

wallpaper, window, or mirror.

3. Hold iron about 6 inches away from

garment. Press and release the Blast of Steam Button to

steam out wrinkles. Do not press Blast of Steam Button

more than once every

3 seconds.

4. To turn iron off, turn Temperature Settings to OFF ( O ).

Unplug iron.

5. Empty water from the iron following directions in “Care and

Cleaning.”

NOTICE: Do not allow the hot soleplate to touch delicate

garments.

Features (cont.)

Care and Cleaning

Iron

1. The Water Tank of your iron should be emptied after each

use. Set Temperature Settings Button to OFF ( O ). Unplug

the iron and open Water Tank Fill Cover. Turn iron upside

down until Water Tank Opening is parallel with sink. Water

will run out of water tank opening.

2. After iron has completely cooled, store in an upright posi-

tion. NOTICE: Do not store iron laying flat on soleplate.

840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 8

11

Troubleshooting

Won’t

heat

PROBLEM

PROBABLE CAUSE

Water is

leaking

Won’t

steam

Leaves

spots

• Is the iron plugged in and the outlet working?

Check the outlet by plugging in a lamp.

• Is the Temperature Settings Button set on a

fabric setting?

• Iron may have gone to auto off (blinking red

light). Push “Settings” to restart and adjust to

desired temperature.

• Do not overfill the water tank.

• If steam ironing, is Adjustable Steam Dial in a

steam position, the Temperature Settings

Button in the steam range, and did the iron

have enough time to preheat?

• If dry ironing, make sure the Adjustable Steam

Dial is in the (DRY IRON) position.

• Check the water level.

• Is the Adjustable Steam Dial in a STEAM

position?

• Has the iron had enough time to preheat?

• ALWAYS empty the water tank of the iron

after using. Water left in the tank may discolor

clothing and soleplate.

• If the iron cord should become twisted, unplug

iron and let cool. Hold iron cord in the middle

of entire length. Let plug and iron dangle freely

until cord uncoils. This will extend the life of

your iron cord.

Twisted

cord

10

Care and Cleaning (cont.)

Soleplate

1. Never iron over zippers, pins, metal rivets, or snaps, since

these may scratch the soleplate.

2. To clean occasional buildup on the soleplate, wipe with

a sudsy cloth. Do not use abrasive cleansers or metal

scouring pads.

3. Always store iron upright in the heel rest position.

Self-Clean

To keep the steam vents clear of any buildup, follow these

instructions each time you iron using steam.

1. Set Temperature Settings Button to OFF ( O ) and set

Adjustable Steam Dial to (DRY). Fill iron with water

to 1⁄2 of its maximum capacity.

2. Set Temperature Settings Button to Linen setting and let

iron heat for 2 minutes. Keep Adjustable Steam Dial on

(DRY).

3. Set Temperature Settings Button to OFF ( O ). Unplug iron

and hold over a sink with soleplate facing down.

4. Turn Adjustable Steam Dial to (MAX), while pressing Self-

Clean Button often. Boiling water and steam will flow out of

steam vents. Allow all water to drain from iron.

5. Gently move iron front to back to allow water to clean

entire soleplate area.

6. If water still remains inside of soleplate, reheat iron as

indicated in Step 2. Boiling water and steam could still flow

out of steam vents.

840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 10

13

12

LIMITED WARRANTY

This warranty applies to products purchased in the U.S. and Canada. This is

the only express warranty for this product and is in lieu of any other warranty

or condition.

This product is warranted to be free from defects in material and

workmanship for a period of one (1) year from the date of original purchase.

During this period, your exclusive remedy is repair or replacement of this

product or any component found to be defective, at our option; however,

you are responsible for all costs associated with returning the product to us

and our returning a product or component under this warranty to you. If the

product or component is no longer available, we will replace with a similar

one of equal or greater value.

This warranty does not cover glass, filters, wear from normal use, use not

in conformity with the printed directions, or damage to the product resulting

from accident, alteration, abuse, or misuse. This warranty extends only to

the original consumer purchaser or gift recipient. Keep the original sales

receipt, as proof of purchase is required to make a warranty claim. This

warranty is void if the product is used for other than single-family household

use.

We exclude all claims for special, incidental, and consequential damages

caused by breach of express or implied warranty. All liability is limited to the

amount of the purchase price. Every implied warranty, including any

statutory warranty or condition of merchantability or fitness for a

particular purpose, is disclaimed except to the extent prohibited by law,

in which case such warranty or condition is limited to the duration of

this written warranty. This warranty gives you specific legal rights. You may

have other legal rights that vary depending on where you live. Some states

or provinces do not allow limitations on implied warranties or special,

incidental, or consequential damages, so the foregoing limitations may not

apply to you.

To make a warranty claim, do not return this appliance to the store. Please

call 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada or visit

hamiltonbeach.com in the U.S. or hamiltonbeach.ca in Canada. For faster

service, locate the model, type, and series numbers on your appliance.

Troubleshooting (cont.)

Blinking

red light

PROBLEM

PROBABLE CAUSE

All lights

blinking

Continuous

blinking

green light

• Iron went to auto off. Iron will reheat when

moved.

• Unplug iron; then plug back in to reset.

Reselect previous temperature setting. If all

lights are still blinking, call Customer Service.

• Overuse of steam causes the soleplate to cool.

The light blinks as the iron reheats.

840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 12

Page is loading ...

Hamilton Beach 14348Z User manual

This manual is also suitable for

Hamilton Beach 14348Z User manual

in other languages

Related papers

Other documents