5019 312 11084
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
ApproxProgrammeDuration
(hours:minutes)
Mixed 40 3.0 45 0.43 1:00
Whites 40 6.0 48 0.65 2:45
Lightcolours 40 4.0 67 0.50 1:20
Darkcolours 40 4.0 50 0.50 1:25
Cotton 95 6.0 59* 1.85 2:05
Cotton 60 6.0 48 1.02 2:30
Cotton 40 6.0 48 0.60 2:30
Synthetics 60 3.0 54* 0.85 1:40
Synthetics 40 3.0 50 0.50 1:25
Delicates 40 1.5 50 0.55 0:45
Wool/Handwash 40 1.0 40 0.55 0:35
Baby 40 5.0 64 0.65 2:43
SuperSilent 60 6.0 48 0.78 4:00
AquaEco 40 2.5 19 0.43 1:00
Speed15 30 3.0 30 0.15 0:15
EcoCotton** 60 6.0 48 0.90 3:30
EcoCotton** 60 3.0 35 0.69 2:45
EcoCotton 40 6.0 48 0.61 3:00
EcoCotton** 40 3.0 35 0.53 2:40
CONSUMPTION DATA
Whirlpool is a registered trademark of Whirlpool USA.
Adddetergentasindicatedanthefrontpageandas
describedinthechapter“DetergentandAdditives”in
yourInstructionsforUse.
1. Turntheprogramme selectortothedesired
programme.Thedisplayshowstheprogramme
durationinhoursandminutesaswellasthe
predefinedtemperature.The“Start(Pause)”
buttonflashes.
2. Thetemperaturecanbealteredbypressingthe
“Temperature”button.
3. Theindicationlampofthepredefinedspin speed
lightsup;incaseyouwanttosetanotherspinspeed,
pressthe“Spin”button.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
“DOOR OPEN” INDICATION
Beforestartingandafterendofaprogramme,thelamp
lightstoshowthethelidcanbeopened.Aslongasa
washprogrammeisrunning,thelidremainslockedand
mustonnoaccountbeforcedopen.Incaseyouhave
anurgentneedtoopenitduringarunningprogramme,
referto“Cancelarunningprogrammebeforetheend”.
washperformanceandstainremoval.
• Choosetemperatureof30or40°Candusewith
maximumload.
• Addanappropriateamountofin-washadditivefor
stainremoval(powder)tothemainwashchamber,
togetherwithyourdetergent(onlyusepowder
detergentwiththisoption).Respectthe
manufacturer’sdosinginstructions.
• Prolongstheprogrammebyapprox.10to15minutes.
• Appropriateforuseofstainremoversandbleaches
onoxygenbasis.Chlorine or perborate bleaches
must not be used!
“Prewash” button
• Onlyforheavilysoiledloads(forexamplesand,
granulardirt).Increasesthecycletimeby
approximately15min.
• Donotuseliquiddetergentforthemainwashwhen
activatingthePrewashoption.
“Intensive rinse” button
• Morewaterisaddedandrinsecycleisprolonged.
• Thisoptionisparticularlysuitableforareaswithvery
softwater,washingbabylinenandhelpingpeople
withallergies.
“Rinse hold” button
• Thelaundryremainsinthelastrinsewaterwithout
progressingtothefinalspincycletoavoidcreasing
andpreventcoloursfromchanging.
• Itisparticularlyusefulifyouwanttopostpone
spinningtoalatertime,orifyouwanttodrainonly.
• Ifyouselect“RinseHold”,donotleaveitemsto
soakfortoolong.
PROGRAMME START
Openthetapandpressthe“Start(Pause)” button.
Theindicationlampnexttothe“Start(Pause)” button
lightsup.Theprogrammesequenceindicatorshowsthe
currentprogrammephase,runningfromlefttoright
throughWash,Rinse,Spin/Drain.
Thedisplayshowstheremainingprogrammetime.Due
tovariationsinloadandtemperatureofinletwater,the
remainingtimeisnewlycalculatedincertainprogramme
phases.Ifthisisthecase,an animation appears on
the time display.
PROGRAMME END
• Allthelightsoftheprogrammesequenceindicator
areoff,andthe“Dooropen”indicationlightsup.
1. Turntheprogrammeselectortothe“Off/O”
position.
2. Closethewatertap.
3. Openlidanddrumandunloadthemachine.
4. Leavethelidopenforsometimetoallowthe
interiorofthemachinetodry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Pressthe“Start(Pause)” buttontopausethe
programme.Thelightflashes.
2. Selectthenewprogramme,temperature,any
optionsandanotherspinspeedifyouwant.
3. Pressthe“Start(Pause)” buttonagain.Thenew
programmecontinuesatthesamepositionwhere
thepreviousprogrammewasinterrupted.Donot
adddetergentforthisprogramme.
CANCEL A RUNNING PROGRAMME BEFORE
THE END
The“Reset/Drain”buttoncancelsaprogrammebefore
theend.
• Pressthe“Reset/Drain” buttonforatleast3
seconds.Thewaterisdrainedout;itmaylastawhile
untilyoucanopenthelid.
SELECT ANY DESIRED OPTION
Pushthebutton(s)ofanyoption(s)desired-the
respectiveindicationlightsup.Whenthecombination
ofprogrammeandadditionaloption(s)isnotpossible,
theindicationlightsswitchoffautomatically.Unsuitable
combinationsofoptionsaredeselectedautomatically.
“Eco” button
• Withamodifiedtemperatureprofileandaslightly
prolognedwashingduration,theoptimum
combinationofexcellentwashingresultandeven
lowerenergyconsumptionisachieved.
“Clean+” button
• Choosethisoptionifyouuseanin-washadditivefor
stainremoval(powder,forexample“Vanish”)-it
willoptimizetheadditive’sefficiencytogetbetter
START DELAY
The“Startdelay”buttonallowstorunthemachineat
theconsumer'sconvenience,forexampleatnightwhen
electricityischeaper.Donotuseliquiddetergentwhen
activatingthe“Startdelay”.
• Selectprogramme,temperatureandoptions.
• Pressthe“StartDelay”buttontoselectthedelay
timeupto23hours;
• Pressthe“Start(Pause)”button.
Theindicationlightoverthe“Startdelay”button
flashesandthecountdownofthedelaytimebegins.
Thedotbetweenhoursandminutesofthedelay
timeindicatedflashes.
• Thetimedelayindicationdisappearswhenthe
programmestartsanditisreplacedbytheremaining
programmetime.
• Oncehavingpressedthe“Start(Pause)”button,
thenumberofhourspreselectedcanbereducedby
pressingandholdingthe“Startdelay”button.From
onehouron,thedelaytimecanalsobereducedin
stepsof10minutes.
To cancel the “Start delay”
..before you press the “Start(Pause)” button:
• Turntheprogrammeselectortoanotherposition
orpressthe“Reset/Drain”button.
..after having pressed the “Start(Pause)” button:
• Press“Start (Pause)“-thedelaytimedisappears
fromthedisplay;press“Start (Pause)“againto
starttheselectedprogrammeimmediately.
Note:Theprogrammestopsto“Rinsehold”atthe
timethe“Rinsehold”lightintheprogramme
sequenceindicatorison.Theindicationlampnextto
the“Start(Pause)”buttonflashes.
Terminate the “Rinse hold” option:
• Pressthe“Start(Pause)”button;theprogramme
willterminateautomaticallywiththefinalspincycle
forthepresentwashprogramme.
• Ifyoudonotwishtospintheclothes,turnandhold
the“Reset/Drain”buttonforafewsecondstostart
theDrainprogramme.
“Spin” button
• Everyprogrammehasapredefinedspinspeed.
• Pressthebuttontosetanotherspinspeed.
• Ifspinspeed“0”isselected,thefinalspinningis
cancelledbutintermediatespinpeaksremainduring
therinse.Thewaterisdrainedoutonly.
ConsumptionvaluesweremeasuredinnormalizedconditionsincompliancewithstandardIEC/EN60456.Consumptiondatainthehomemayvarywith
respecttothevaluesinthetableinrelationtothewatersupplypressureandtemperature,theloadandthetypeofwash.Waterandenergyconsumptionrefer
tothedefaultsettingoftheprogrammes;selectingspecialoptionsormodifyingspinspeedortemperaturewillchangetheconsumptiondata.
Theprogrammedurationmaydifferfromthevaluesindicatedaboveasitdependsontheoperationconditionsapplicableatthattime(seealso
“TroubleshootingGuide”inyourInstructionsforUse).
* Toreducethewatertemperature,somecoldwaterisaddedattheendofthemainwashcycle,beforethepumpdrainsthewaterout.
** ReferenceProgrammesforEnergyLabel.
FAILURE INDICATIONS
Incaseofanyfailuresorirregularities,consultthe
“TroubleshootingGuide”inyourInstructionsforUse.
“Service”
Lightingupofthe“Service”indicationcanbecaused
byafaultinanelectricalcomponent.Refertothe
“TroubleshootingGuide”inyour“InstructionsforUse”;
ifthefaultpersists,contactourAfterSalesService.
“Water tap closed”
Theappliancehasnoorinsufficientwatersupply.Open
thewatertap:iftheindicationsstilllightsup,refertothe
“TroubleshootingGuide”intheInstructionsforUse.
“Clean pump”
Wastewaterisnotpumpedout.Checkwhetherthe
drainhoseiskinkedorthefiltermustbecleaned:inthe
lattercaserefertotheInstructionsforUse(“Removing
theFilter”).