AMT Pangaea CP-100FX Quick Start

Type
Quick Start
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
Quick Start
1. Turn the volume knob on your guitar all the way down to zero.
2. If you want to use your effect pedals connect the last pedal’s output to Pangaea’s Input, just like you would normally connect it to a guitar amp. You can also plug your
guitar directly into Pangaea! See the diagram below.
3. Use 1/4’’ TRS cable to connect Pangaea’s Main Out to your playback system or simply plug your headphones into Phones Out.
4. Connect the included AC adapter to Pangaea and plug it into a power outlet.
5. Turn on your playback system.
6. Now slowly turn up your guitar’s volume. Watch out, it may get pretty loud!
7. Too loud? Press 2/VOL button to adjust volume. Turn Navigation/Conrm knob to choose between Master and Phones volume. Press it to edit the values. Press Esc
to return to the home screen.
8. Browse pre-programmed tones using the Navigation/Conrm knob. Press it to recall the selected preset.
9. Press Edit button to edit a preset. You’ll see effect blocks: RF (Resonance Filter); GT (Noise Gate); CM (Compressor); PR (Preamp Simulator); PA (Power Amp
Simulator); IR (Cabinet Simulator); EQ (Parametric EQ); DL (Delay); PH (Phaser); FL (Flanger); CH (Chorus); ER (Early Reections); RV (Reverb) and TR
(Tremolo). Turn Navigation/Conrm knob to select the desired effect block and press it to enable/disable the effect. Press Edit again to tweak effect’s parameters.
When you’re done press Esc several times to get back to the home screen.
10. Out of tune? Activate the tuner by pressing 5/TUNER button.
11. While on the home screen press Esc to see currently chosen Impulse Response’s name.
12. Download full User’s Guide from www.amtelectronics.com
AMT
PANGAEA
IR CONVOLUTION PLAYER
CP100FX
INPUT THRU L BAL OUT R OUT LR
PHONES AUX IN USB SD CARD S
/
PDIF
OUT
TAPFX
DOWN CONFIRM UP
1 2 3 4 5
ATT IN VOL EQ SYS TUNER
IN CLIP OUT CLIP
Esc EDIT
CONFIRM
DRIVE
AMT
PANGAEA
IR CONVOLUTION PLAYER
CP-100FX
www.amtelectronics.comRev A (For use with rmware V1.5.6) ©2016 AMT Electronics. Omsk, Russia
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
electronics.com
AMT
PANGAEA
IR CONVOLUTION PLAYER
CP100FX
INPUT THRU L BAL OUT R OUT LR
PHONES AUX IN USB SD CARD S
/
PDIF
OUT
TAPFX
DOWN CONFIRM UP
1 2 3 4 5
ATT IN VOL EQ SYS TUNER
IN CLIP OUT CLIP
Esc EDIT
CONFIRM
AMT
PANGAEA
IR CONVOLUTION PLAYER
CP100FX
GND BAL R BAL OUT L
EXP MIDI OUT MIDI IN
OFF ON
DC 12V OUT LR THRU INPUT
+ –
MADE IN RUSSIA OMSK
AMT
PANGAEA
IR CONVOLUTION PLAYER
CP-100FX
Turn to select presets and press to recall
the selected preset.
Turn to select the effect block. Press to
turn the selected effect block on or off.
Turn to navigate or to choose between
values. Press to enter sub-level menu/
edit the selected parameter or to conrm
the selected value
Press to select presets.
Alternative function may be assigned
Press to select presets.
Alternative function may be assigned
Press to recall the selected preset.
Alternative function may be assigned
Press to see currently chosen cabinet’s
name.
Press to return to the upper level menu
or to the home screen
Press to edit the preset or the effect
block
When on the home screen press:
1/ATT IN to adjust attenuator settings
2/VOL to adjust output levels
3/EQ to access the Master EQ
4/SYS to get to the system menu
5/TUNER to activate the tuner.
When on the preset screen press:
1/ATT IN to reset the preset to factory
default settings
2/VOL to adjust output level for the
current preset
3/EQ to manage controllers for the
current preset
4/SYS to rename the preset
5/TUNER to copy currently selected
effect block to another preset
Lights when the
effects are activated
Shows you the time and speed
of delay and modulation effects
Lights green when the sound comes into
Pangaea.
Lights orange when clipping occurs
Connect
headphones
here
Connect external
audio device, such
as MP3 player
Connect to the
computer and access
the internal storage
Insert microSD card here
and access unlimited amount
of Impulse Responses
Connect to
studio equipment
via S/PDIF
Plug your instrument in here
This output sends out an unprocessed
copy of whatever comes into Pangaea’s
Input. Use a speaker cable to connect
a speaker cabinet or a dummy load here
in case you’re feeding a signal from a
tube amp or a power amp into Pangaea’s
Input!
Use balanced XLR cables
to connect to the mixer,
PA or studio equipment
Turn it off to eliminate
hum and buzz caused
by ground loops
Connect to guitar
amp or playback
system
Connect the
included AC
adapter here
Connect
to MIDI
equipment
Connect a standard expression pedal,
such as AMT EX-50
  • Page 1 1
  • Page 2 2

AMT Pangaea CP-100FX Quick Start

Type
Quick Start

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI