2. Seagate

Seagate , Personal Storage Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Seagate Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of this technical procedure?
    What is the first step in the installation process?
    What should be done after downloading the 5000_usb.exe file?
    How can I connect the Personal Storage 5000 drive?
    What happens after connecting the drive?
    What should I do in the Add New Hardware Wizard?
    How do I specify the location of the driver?
    What is the next step after selecting the driver location?
    How do I complete the installation?
    What happens after restarting the computer?
R
TECHNICAL PROCEDURE
Subject: 5000_USB.EXE – Manual Installation of Personal Storage 5000, USB Drivers for Windows 98SE.
Summary: Graphical Procedure for manually installing Personal Storage 5000 USB Drivers for use with Microsoft
Windows 98SE (Second Edition).
1. Download 5000_usb.exe from this web site.
2. Extract 5000_usb.exe to the computer that the Personal Storage 5000 drive is connected to. Upon extraction, the
5000_USB directory will be created on your system.
Suggestion: Extract the 5000_usb.exe to the Desktop of the computer that you will connect the Personal Storage 5000 drive to.
3. Shut down your computer and connect the Personal Storage 5000 drive to an available USB interface on your
computer. Once connected, apply power to the system.
4. After Windows 98SE starts, the Add New Hardware Wizard box will appear.
Click the Next > button to continue.
NOTE: Model & Version Number of the Personal Storage 5000 will vary pending on the Model installed.
Date: 10/9/2003
R
TECHNICAL PROCEDURE
5. On the next page, select "Search for the best driver for your device..." and click the Next > button to continue.
6. On the next page, check the "Specify a location:" checkbox and click on the Browse... button.
Date: 10/9/2003
R
TECHNICAL PROCEDURE
7. In the Browse for Folder Window, locate the 5000_USB directory and click the OK button.
8. Click on the Next > button to accept the selection of the driver.
NOTE: The path identified in the image will vary depending on the location of the file. At this point the Personal
Storage 5000 software driver will load on your Windows 98SE computer.
Date: 10/9/2003
R
TECHNICAL PROCEDURE
9. Click Next > again…
10. To complete the installation, click on the Finish button and restart your Windows 98SE computer.
11. At this point the Safely Remove Devices Icon will appear in the TaskBar.
Date: 10/9/2003
R
TECHNICAL PROCEDURE
Date: 10/9/2003
12. When finished, the Add New Hardware Wizard will appear for a second time. Repeat Steps 1-10 to install the
Storage Adapter Bridge Module.
/