Whirlpool AKZ 402/IX Program Chart
- Category
- Cookers
- Type
- Program Chart
AKZ 402
PRODUCT DESCRIPTION SHEET
DE GR GB
5019 310 56690
1.
Control panel
2.
Cooling fan (not visible)
3.
Upper heating element
4.
Grill heating element
5.
Oven light
6.
Fan
7.
Lower heating element (hidden)
8.
Oven door
ACCESSORIES
CONTROL PANEL
1. Function selector knob
2. Electronic timer
3. Thermostat knob
4. Knob to switch on the left front cooking zone of the hob*
0 1 ...10
5. Knob to switch on the left rear cooking zone of the hob*
0 1 ...10
6. Knob to switch on the right rear cooking zone of the hob*
0 1 ...10
7. Knob to switch on the right front cooking zone of the hob*
0 1 ...10
8. Hob operation yellow LED
*) The hob knobs are not interchangeable. After any cleaning
or Service operation, replace them in their original position.
Retractable knobs
• To use this type of knob, press it in the middle.
•The knob comes out.
• Turn it to the required position.
Once cooking is over, turn the knob to
0
and press it
again to restore it to its original position.
Bottom
Top
shelf
shelf
Aluminium baking tray:
Wire Shelf:
1
2
3
6
8
4 5 7
HOW TO OPERATE THE OVEN
• Turn the knob to the desired oven function.
The oven light switches on.
• Turn the thermostat knob clockwise to the required temperature. The red thermostat led lights up,
switching off again when the oven reaches the selected temperature.
At the end of cooking time:
• Turn the knobs to 0.
Important:
• When using the hotplates for the first time, set the knobs to 6 and allow them to operate for approx. 3
minutes in order to eliminate odours, placing a pot with an appropriate diameter and half full of water on
each.
• Do not leave the hot plates turned on when they are empty.
• Use pots and pans specifically designed for electric hobs, particularly those with multiple layer flat-
bottoms.
• Use pans whose bottom diameter is equal to that of the hotplates, or slightly larger.
Oven function chart
Function Description of function
0OVEN OFF
-
LAMP
• To switch on the oven light.
STATIC
• To cook meat, fish and chicken on the same level.
• Preheat the oven to the required cooking temperature and place the
food inside as soon as the red thermostat L.E.D. switches off.
• Ideally, the second or third shelf level should be used.
PASTRY/FAN
• To cook on up to two different shelf levels.
• If necessary, switch the positions of the dishes to cook food more evenly.
• It is not necessary to preheat the oven (except for pizzas and focaccias).
GRILL
• To cook meat (smoked bacon, steaks, sausages, etc.) and for making
toast.
• Pre-heat the oven for 5 min. with the door closed.
• For best results, leave the oven door open when grilling.
• Arrange food on the wire shelf. When cooking meat, to avoid spatters of
fat and smoke, pour a little water into the drip tray.
• Turn the food during grilling.
TURBO GRILL
• To grill large joints of meat (roast beef and other roast meats).
• The oven door must be kept closed during the cooking cycle.
• When cooking meat, to avoid spatters of fat and smoke, pour a little
water into the drip tray.
• Turn the meat during grilling.
DEFROSTING
• Ideal for thawing frozen food at room temperature.
• The food should be placed in the oven in its wrapping to prevent it from
drying out.
N.B:
Cooking times and temperatures are approximate only.
FOOD Function
Level
(from the
bottom)
Temperature
(°C)
Cooking time
min.
Lamb/Veal/Beef/Pork
2 200 90-110
Chicken/Rabbit/Duck
2 190-200 70-80
Turkey/Goose
2 200-210 100-180
Fish
2 190-200 50-80
Stuffed peppers and tomatoes/roast
potatoes
2 190 50-60
Leavened cakes
2 180 40-50
Filled pies
2 180-190 45-90
Biscuits
2 180 20-40
Lasagna
2 190-200 40-50
Pizza/Bread
2 225- 250 5-10
Toast
3/4 200-225 40-50
Cutlets/Sausages/Kebabs
3/4 200-225 40-50
1/2 chicken
3 200-225 40-50
Whole chicken
2/3 200-225 60-70
Roast beef
2 200-250 60-70
Roasts
2/3 200-225 60-80
Fish (whole)
3 190-200 40-50
This symbol does not correspond to any cooktop function; the heating element is off.
HOW TO OPERATE THE COOKTOP
The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a
numerical scale corresponding to different power settings, and a series of function symbols.
Turn the control knob of the relevant hotplate anti-clockwise to the desired power setting (see the instructions supplied
with the cooktop).
Cooktop Functions Table (depending on model)
Function Description of function
HEAT
MAINTENANCE
To maintain a constant temperature of 60° until the end of cooking. To select this function, turn the knob
to
.
DUAL ZONE
This is available on the front left and rear left hotplates. This extends the heating area of the cooktop in order
to allow the use of large, oval or rectangular pots or cooking receptacles. To select this function: turn the knob
to
and wait until the residual heat indicator for the hotplate begins to flash. Select the power setting
required by turning the knob anti-clockwise. The residual heat indicator remains on to indicate that the
cooktop is in use. To deselect, turn the knob to
“0”
.
ICP (initial
cooking
function)
This function accelerates the heating of the selected cooking zone for a specified length of time during the
first part of the cooking cycle. To select this function, turn the knob to
.
Wait until the residual heat
indicator for the hotplate begins to flash, then turn the knob anti-clockwise to the desired power setting.
E.g.: if level
“1”
is selected, the hotplate will work on full power for
1 minute
, after which it will continue
on power setting
“1”
until the end of cooking, unless the knob is turned to adjust the power setting. if level
“6”
is selected, the hotplate will work on full power for
6 minutes,
after which it will continue on power
setting
“6”
until the end of cooking, unless the knob is turned to adjust the power setting. This function can
be used with all power settings,
except for power setting “10”
.
FAST BOIL
This function is used to bring water to the boil rapidly and remains on for a preset time. At the end of the
preset time, the cooktop automatically returns to the maximum power setting. This function can be
selected even during cooking. Important: Before selecting this function, make sure the pot is positioned on
the selected hotplate in order to avoid any damage to the cooktop surface. The stated performance values
for this function are those guaranteed for all glass ceramic cooktops. For this function, place the pot on the
selected hotplate and turn the knob to . To deselect, change the position of the knob.
GENTLE HEAT
To allow dough to rise, to soften butter taken from the fridge, to keep baby bottles or food warm, also for
making yoghurt, melting chocolate, etc.
This function is only available when the residual heat indicator is on. For this function, make sure the
residual heat indicator of the desired hotplate is on. Turn the knob to . To deselect the function,
change the position of the knob.
INSTRUCTIONS FOR USING THE ELECTRONIC TIMER
GB
Electronic timer
Starting the oven
When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates
12.00.
Selecting and changing the clock time:
1. Press ok. The time of day flashes on the display.
2. Press button
-
or
+
to set the hour.
3. Press ok and
-
or
+
to set the minutes.
4. Press ok to confirm.
To change the time:
Press and hold ok for 2 seconds until the time flashes on the display. Repeat the steps described above.
Selecting the cooking function:
1. Turn knob
to the chosen function:
2. Turn knob
#
to select the temperature.
3. Press ok to confirm; the oven will switch on. The indicator next to switches off when the selected temperature
is reached.
To change the temperature:
1. Turn knob
#
and select the desired temperature.
Important notes:
To cancel any selection, turn knob
to
0.
Alternatively, press ok to switch the oven off, maintaining the previously
selected functions.
Selecting the cooking time:
Select the cooking time (available with any function, except for the special functions) to turn the oven on for a specified
period of time. At the end of the specified time the oven will switch off automatically. The maximum programmed cooking
time is 6 hours.
1. Set the function and the temperature (see chapter: Selecting the cooking function) up to point 2 without confirming by
pressing ok.
2. Press set (the indicator on the display lights up next to the cooking time symbol ) and, within 8 minutes, proceed
to select the desired cooking time using buttons
-
or
+
.
3. Confirm the selection by pressing ok; the oven switches on and the display shows the residual cooking time.
4. To change the previous temperature setting, turn knob
#
.
To return to the residual cooking time, wait 5 seconds.
Appearance of on the display:
Once the set time has elapsed, an acoustic signal is heard and appears on the display.
The oven will switch off automatically.
To change the cooking time, use button
-
or
+
. Return to point 3 chapter Selecting the cooking time.
1. Turn knob
to 0.
The time of day appears again on the display.
To increase the cooking time, use button
-
or
+
.
Selecting the end of cooking time
Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and
59 minutes.
1. Proceed as described in points 1 and 2 chapter Selecting the cooking time
2. Press set to set the end of cooking time: the indicator next to the symbol lights up.
3. Set the end of cooking time using button
-
or
+
.
4. Press ok to confirm the end of cooking time.
The oven will turn on automatically at the end of cooking time minus cooking time: the indicators on the display
above the symbols will light up.
Minute minder
The timer can only be set when the oven is not in use and allows a maximum setting of 6 hours.
To set the minute minder:
1. Leave knob
on
0
. The display shows the time of the day.
2. Press set. The indicator next to the symbol lights up.
Use buttons
-
or
+
to set the desired time.
3. Press ok to confirm the selection.
Once the set time has elapsed:
An acoustic signal sounds and flashes on the display.
Press ok: The acoustic signal stops. The time of day appears again on the display.
Childproof lock :
1. With knobs
and
#
set to 0, press buttons ok and
-
at the same time for 3 sec. The indicator next to the
symbol lights up.
2. The oven functions will not operate while the childproof lock is activated.
3. To deactivate the lock, repeat the sequence described in point 1.
Display
Function selector knob
Setting button (set)
!
Confirmation button (ok)
"
Buttons for changing time
(
-
+
)
#
Thermostat knob
Temperature indicator Cooking time End of cooking time
Childproof lockMinute minder
-
1
-
2
-
3
Whirlpool AKZ 402/IX Program Chart
- Category
- Cookers
- Type
- Program Chart
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Whirlpool AKZ 400/IX/05 Program Chart
-
-
-
-
-
-
-
-
Whirlpool AKP 309/WH/03 Program Chart
-
Other documents
-
Bauknecht ESZH 5950 IN Program Chart
-
-
Ignis AKL 887/WH/01 Program Chart
-
-
-
Bauknecht EMZD 5263 WS Program Chart
-
-
-
-
IKEA 700 947 31 Program Chart