Whirlpool AWOE 8758 S Program Chart

Type
Program Chart

This manual is also suitable for

Whirlpool AWOE 8758 S offers various programs for your laundry needs. Its "White Cotton/Antibacterial" program at 80°C ensures sanitization by eliminating bacteria. For delicate fabrics, the "Delicates" program provides gentle care. For woolens, the "Wool" program is approved by The Woolmark Company. Save energy with the "SuperEco" program, ideal for overnight use. The "Daily Load" program handles slightly soiled cotton and synthetics. Refresh lightly worn clothes with the "Speed 15" program. Additional options like "Prewash," "Clean+," and "Intensive Rinse" enhance washing performance.

Whirlpool AWOE 8758 S offers various programs for your laundry needs. Its "White Cotton/Antibacterial" program at 80°C ensures sanitization by eliminating bacteria. For delicate fabrics, the "Delicates" program provides gentle care. For woolens, the "Wool" program is approved by The Woolmark Company. Save energy with the "SuperEco" program, ideal for overnight use. The "Daily Load" program handles slightly soiled cotton and synthetics. Refresh lightly worn clothes with the "Speed 15" program. Additional options like "Prewash," "Clean+," and "Intensive Rinse" enhance washing performance.

GB PROGRAMME CHART
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702
:
optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
5019 301 06256
Whirlpool is a registered trademark of Whirlpool USA
Programme
Tempe-
rature
Care
Labels
Max
Load
kg
Type of wash/Notes
- Respect the manufacturer’s recommendations on the care label
Detergents and additives Selectable options Start
delay
Spin
Pre-
wash
Main
wash
Softener Pre-
wash
Clean + Easy
ironing
Intensive
rinse
Variable
spin
Max
Spin
Speed
rpm
White Cotton /
Antibacterial
70 - 95 °C 8.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and
linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your
laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN
13697 standard of Nov. 2001.
Yes
❉❉
max.
Cotton
20 - 60 °C
8.0
Synthetics
20 - 60 °C
3.5
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
Yes
❉❉
max.
Delicates
20 - 40 °C
2.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Yes
❉❉
——
❉❉
1000
1)
Wool
20 - 40 °C 2.0
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine washable
wool.
Yes
——
❉❉
1000
1)
Handwash /
Lingerie
/
20 - 40 °C 2.0
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
Up to a temperature of 30°C, this cycle is particularly suitable to treat delicate lingerie (use of a laundry net
strongly recommended).
This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.
Yes
——
❉❉
400
1)
Baby
20 - 60 °C 7.0
Normally soiled baby clothes, baby quilts, beddings and blankets as well as washable toys made of cotton
and/or linen.
The washing liquid is rinsed out even more thoroughly and thus helps to protect sensitive baby skin.
Yes
❉❉
——
❉❉
max.
Big Items
20 - 60 °C
3.0
Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other artificial fibers;
sleeping bags, bathmats and similar items.
Yes
❉❉
——
❉❉
1000
1)
Sport
20 - 30 °C
3.5
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.
This programme includes a prewash cycle – you can add detergent also to the prewash chamber. Do not add
any softener.
Yes
——
❉❉
max.
SuperEco
20 - 60 °C 8.0
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and
linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to
additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to
“0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.
Yes
——
❉❉
max.
Daily load
20 - 60 °C
6.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
Yes
——
❉❉
max.
Speed 15
20 - 30 °C 3.0
Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.
Yes
——
❉❉
max.
Rinse & Spin
——
8.0
Same as the last rinse and the final spin in the “Cotton” programme.
——
——
❉❉
max.
Spin
——
8.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
——
❉❉
max.
A. Programme selector
B. Display
C. “Temperature” button
D. “Variable spin” button
E. “Start delay” button
F. “Start (Pause)” button
G. “Reset/Drain” button
H. “Favourites” button
I. Programme sequence indication
J. “Child lock” indication
K. “Detergent overdosage” indication
L. Red failure indications
Add garment Programme
in process
Programme
finished
F
G
A
B
L
K
C D
E H
I
}
J
30106256GB.fm Page 1 Friday, February 20, 2009 8:46 AM
Black process 45.0° 150.0 LPI
5019 301 06256
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for Use.
Turn the programme selector to the desired programme; the light
of the
“Start (Pause)”
button blinks. The
temperature
and
spin speed
indicated on the display can be altered by pressing the
“Temperature” button or the “Variable spin” button .
When the combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.
“Prewash” button
Only for heavily soiled loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.
Do not use liquid detergent for the main wash when activating
the “Prewash” option.
“Clean+” button
Choose this option if you use an in-wash additive for stain removal
(powder, for example “Vanish”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.
Choose temperature of 30 or 40°C and use with maximum load.
Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
Prolongs the programme by approx. 10 to 15 minutes.
Appropriate for use of stain removers and bleaches on oxygen
basis.
Chlorine or perborate bleaches must not be used!
“Easy ironing” button
Makes ironing easier by an increased water quantity and a very
gentle spin.
“Intensive rinse” button
More water is added and rinse cycle is prolonged.
This option is particularly suitable for areas with very soft water or
for washing baby linen, and helps people with allergies.
Variable spin” button
Every programme has a predefined spin speed.
Press the button to set another spin speed.
If spin speed “0” is selected, the final spinning is cancelled but
intermediate spin peaks remain during rinse. The water is
drained out only.
If you select “Rinse hold” , the laundry remains in the last
rinse water without progressing to the final spin cycle, to avoid
creasing and prevent colours from changing. To activate the
“Rinse hold”, press the “Variable spin” button repeatedly until the
“Rinse hold” symbol on the display lights up.
- The wash programme stops to “Rinse hold” when the
“Rinse hold” symbol on the display blinks; the light of
“Start (Pause)”
button blinks as well.
- To terminate the “Rinse hold” by draining the water,
without any spinning, press the
“Start (Pause)”
button.
- To terminate the “Rinse hold” by spinning the laundry, press
the “Variable spin” button to select the desired spin speed
and then
“Start (Pause)”
to start the spin cycle.
- Do not leave the laundry to soak for too long in the “Rinse hold”.
If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
White Cotton / Antibacterial 95 8.0 82
**
2.40 2:10
Cotton
***
60 8.0 64 1.36 2:20
Cotton 40 8.0 77 0.75 2:05
Synthetics 60 3.5 46
**
0.85 1:35
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Wool 40 2.0 60 0.60 0:45
Handwash / Lingerie 40 2.0 45 0.60 0:40
Baby 40 7.0 95 0.80 2:21
Big Items 40 3.0 74 0.75 1:30
Sport 30 3.5 54 0.55 1:34
SuperEco 60 8.0 75 0.95 4:00
Daily load 40 6.0 73 0.60 1:00
Speed 15 30 3.0 30 0.20 0:15
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions
applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
SAVE YOUR FAVOURITE PROGRAMMES
Select the desired programme, temperature, spin speed and
option(s), push and hold the
“Favourites”
button for at
least 3 seconds. The lamp next to
“Favourites”
shortly
blinks and then lights up - the programme setting is saved.
Next time you want to use your individual programme setting,
select the programme, push the
“Favourites”
button and
start by pushing
“Start (Pause)”
.
If you want to replace the saved programme setting by another
one, proceed as already described above.
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.
Select programme, temperature, spin speed and options.
Press the Start delay button to select one of the delay time
steps between 0:30 and 23:00 hours.
•Press the
“Start (Pause)”
button .
The countdown of the delay time begins; the clock symbol next to
the delay time and the colon between hours and minutes blink.
The time delay indication disappears when the programme
starts and it is replaced by the remaining programme time.
To cancel the “Start delay
..before you press the “Start (Pause)” button:
Press the
“Reset / Drain
button , or set the start delay
time to “0:00” - the delay time disappears after a few seconds.
..after having pressed the “Start (Pause)” button:
Press the
“Reset/Drain”
button for at least 3 seconds; the
start delay time disappears from the display. Or press
“Start
(Pause)”
twice to start the selected programme immediately.
Before starting a programme, the symbol lights to show that the
door can be opened to add more washing. As soon as you press
“Start (Pause)”
, the door will lock until the end of the
programme and must on no account be forced open. In case you
have to open it urgently during a running programme, refer to
“Reset a running programme before the end”.
If you try to start a wash programme and the door is not properly
closed, the “Add garment” indication will blink.
Open the tap and press the
“Start (Pause)”
button ; the
blinking
“Start (Pause)”
button light becomes constant. The
“Add garment” indication goes out, and the lit bubbles indicate that
the programme is in process. In some phases, the remaining
programme time is newly calculated - if this is the case, the “6
th
sense” indication on the display will fade, and the remaining
programme time is replaced by an animation.
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
Turn the programme selector to a programme position, or run
a programme as usual.
Press the “Temperature” and the “Variable spin”
button simultaneously for at least 3 seconds. The “Child lock”
symbol will shortly blink and then light up to indicate
that the child lock is active.
The programme setting cannot be changed anymore; the only change
possible is to switch the washer off by turning the programme selector
to the “Off/O” position. To deactivate the child lock, proceed in the
same way as for activating it.
If one of the red failure indications on the display lights up, refer to
the “Troubleshooting Guide” in your “Instructions for Use”.
The display shows “End”, and the “Programme finished”
indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
Leave the door ajar to allow the drum to dry.
If you do not turn the programme selector to the “Off / O
position, all lights of the control panel go out after a few
minutes to save energy - only “End” will remain on the display.
The symbol will blink at the end of the programme if you used too
much detergent. Use less detergent next time.
1. Press the
“Start (Pause)”
button to pause the
programme. The light blinks.
2. Select the new programme, temperature, any options and
another spin speed if you want.
3. Press the
“Start (Pause)”
button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
The
“Reset/Drain”
button cancels a programme before the end.
•Press the
“Reset/Drain”
button for at least 3 seconds; an
animation appears on the display. Any existing water is drained
out before the door can be opened.
START DELAY
ADD GARMENT” INDICATION
PROGRAMME START
CHILD LOCK
RED FAILURE INDICATIONS
PROGRAMME END
DETERGENT OVERDOSAGE INDICATION
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
RESET A RUNNING PROGRAMME BEFORE
THE END
30106256GB.fm Page 2 Friday, February 20, 2009 8:46 AM
Black process 45.0° 150.0 LPI
  • Page 1 1
  • Page 2 2

Whirlpool AWOE 8758 S Program Chart

Type
Program Chart
This manual is also suitable for

Whirlpool AWOE 8758 S offers various programs for your laundry needs. Its "White Cotton/Antibacterial" program at 80°C ensures sanitization by eliminating bacteria. For delicate fabrics, the "Delicates" program provides gentle care. For woolens, the "Wool" program is approved by The Woolmark Company. Save energy with the "SuperEco" program, ideal for overnight use. The "Daily Load" program handles slightly soiled cotton and synthetics. Refresh lightly worn clothes with the "Speed 15" program. Additional options like "Prewash," "Clean+," and "Intensive Rinse" enhance washing performance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI