Jensen MCD9424JA Operating instructions

Brand: Jensen

Model: MCD9424JA

Category: Car media receivers

Type: Operating instructions

How to Enjoy Your MCD 9424JA Marine

AM/FM Stereo Receiver/Compact Disc

Player with NOAA Weather Radio Receiver

and Flip-Over Security Panel

Basic Operation ................2

On/Off .................................. 2

Select Mode......................... 2

Volume ................................. 2

Treble................................... 2

Bass..................................... 3

Balance ................................ 3

Fader.................................... 3

Bass Boost........................... 3

Set the Clock........................ 3

Optional Remote Control ..... 4

WeatherBand and Radio

Operation.............................5

Select a Weather Band........ 5

Select a Radio Band ............5

Select a Radio Station ......... 5

Preset Stations .................... 6

Automatically Store

Stations ................................ 6

Preset Scan ......................... 6

CD Player Operation ........7

Insert and Eject CD...............

Skip Tracks .......................... 7

Fast Forward and Fast

Reverse................................ 7

Repeat the same track......... 8

Shuffle: Play all tracks.......... 8

Scan (Preview all tracks) ..... 8

Pause CD............................. 8

Optional Remote Control ..... 8

Troubleshooting ................9

Specifications

and Warranty......................9

MCD 9424JA Features

Technical Assistance

For technical assistance with the operation of the MCD 9424JA,

call 1-800-323-0221.

Operation

Welcome!

What you're holding in your hands is no ordinary owner's

manual. We've tried to make the instructions in this owner's

manual clear and easy to follow. If you take a few minutes to

look through it, you'll learn how to use all of the features on

your new Jensen marine stereo for maximum enjoyment.

For your Jensen stereo to work right, it must be installed

correctly. The enclosed installation manual will show you how

to install your new stereo like a pro. It's a good idea to read

all of these instructions before you begin the installation.

Most installations are straightforward and can be handled by

a do-it-yourselfer with the right tools, patience, and the ability

to follow instructions. But, do-it-yourself installation isn't for

everyone. If you still don't feel confident after reading this

book, consider turning the installation job over to someone

better suited to it.

Warranty Service

If your Jensen stereo should ever require service, you will

need to have the original dated receipt. If you ever need to

return the unit for any reason, always include the receipt with

the product.

COMPACT

DIGITAL AUDIO

OPEN

MCD-9424JA

8 X OVERSAMPLING • 4 X 40 WATTS

LOUD

RPT

SCN

SHF

DISP

VOL

VOLAS/PS

BAND

SEL/

PWR

5448-EOP.p65 7/23/99, 10:35 AM1

MCD 9424JA

Basic Operation

On/Off

Press PWR button to turn the

MCD 9424JA on. Press PWR again

to turn it off.

VOL

Volume

Treble

2. Adjust Treble level

using VOL or

VOL

button.

1. Press SEL button two

times.

Adjust volume by pressing

VOL or

VOL

+7 = maximum

–7 = minimum

Select Mode

Press SEL button to move display through

volume, treble, bass, balance and fader

functions. Use VOL and

VOL

buttons to

adjust the selected mode. When mode has not

been adjusted for 3 seconds, display returns to

normal radio or CD display.

COMPACT

DIGITAL AUDIO

OPEN

MCD-9424JA

8 X OVERSAMPLING • 4 X 40 WATTS

LOUD

RPT

SCN

SHF

DISP

VOL

VOLAS/PS

BAND

SEL/

PWR

VOL

(Fader)

(Balance)

(Treble)

(Bass)

(Volume)

SEL/

VOL

SEL/

5448-EOP.p65 7/23/99, 10:35 AM2

MCD 9424JA

Fader

Bass

Balance

1. Press SEL button five

times.

2. Adjust sound balance front

and rear using VOL or

VOL

button.

1. Press SEL button four

times.

2. Adjust sound balance left

and right using VOL or

VOL

button.

1. Press SEL button

three times.

2. Adjust Bass level

using VOL or

VOL

button.

+7 = maximum

–7 = minimum

R15 = Right speaker only

L15 = Left speaker only

F15 = Front speakers only

R15= Rear speakers only

Bass Boost

Press LOUD button to increase the

bass output. LOUD appears in the

display.

Set the Clock

1. Press and hold DISP

button for 3 seconds

until display flashes.

2. Within 3 seconds, press

to change minutes,

to change hours.

DISP

012

M H

VOL

SEL/

VOL

SEL/

VOL

SEL/

LOUD

3 Sec

5448-EOP.p65 7/23/99, 10:35 AM3

MCD 9424JA

Optional Remote Control

The MCD 9424JA can be controlled through an

optional wired remote control, MWR-20. The

remote control allows access to the most

common functions on the MCD 9424JA such as

Volume, Tune/Track selection, Power on/off,

AM/FM bands, Weather Band and Play/Pause

for CD Mode.

The MWR-20 looks like a standard dash gauge

and is designed to be installed in the dash

panel of your vessel.

The remote requires a standard 2 1/8" gauge

hole cutout.

5448-EOP.p65 7/23/99, 10:35 AM4

MCD 9424JA

Select a Radio Band

Select a Radio Station

Press BAND button to

change radio between three FM

bands and two AM bands. Each band stores

up to six preset stations.

Weather Band and Radio

Operation

Options for selecting a station

Touch

a or for less than one

second to move radio frequency

number up or down one step.

Press

or for more than one

second to move quickly through the

radio frequency numbers. The

numbers change until button is

released.

Select a Weather Band

1. Press WB to change radio to

weather radio receiver.

2. Press W1, W2 and W3 to change

between three weather channels in your

area.

The MCD 9424JA has a three channel NOAA

Weather Radio receiver. NOAA Weather Radio

broadcasts National Weather Service warnings,

watches, forecasts and other hazard information

24 hours a day. The channel freqencies are as

follows: W1=162.55, W2=162.4, W3=162.475.

BAND

COMPACT

DIGITAL AUDIO

OPEN

MCD-9424JA

8 X OVERSAMPLING • 4 X 40 WATTS

LOUD

RPT

SCN

SHF

DISP

VOL

VOLAS/PS

BAND

SEL/

PWR

<1 Sec

>1 Sec

5448-EOP.p65 7/23/99, 10:35 AM5

MCD 9424JA

Preset Stations

Six numbered preset buttons

store and recall stations for

each band.

Store a station:

Automatically Store Stations

Select six strong stations and store them in

current band

Preset Scan

Scan stations stored in current band

Recall a station:

Preset

Station

Number

1. Select a band (if needed).

1. Select band (if needed).

2. Press a preset button to

select stored station.

2. Select a station.

Press

a preset button for

three seconds. The re-

ceiver beeps when station

is saved.

1. Select a band (if needed).

Press

AS/PS button for

than three seconds

(receiver beeps). The new

stations replace stations

already stored in that band.

1. Select a band (if needed).

Touch

AS/PS for

less

than

three seconds. The radio

pauses for five seconds at

each station.

Touch

AS/PS

again to stop scanning when

desired station is reached.

RPT

SCN

SHF

BAND

Band

BAND

AS/PS

BAND

3 Sec

<3 Sec

>3 Sec

AS/PS

BAND

5448-EOP.p65 7/23/99, 10:35 AM6

MCD 9424JA

CD Player Operation

Insert and Eject CD

Fast Forward and Fast Reverse

Hold or to fast forward

or fast reverse CD. CD play

starts from when you release

the button.

Press OPEN button to open flip-over

panel. Push a CD into slot and flip the

panel up to close. The CD will begin

to play.

Press OPEN to open flip-over panel.

Press (eject) to stop CD play and

eject CD from slot. Receiver

switches to radio operation. Flip

panel up to close.

Insert CD

label side up

Skip Tracks

Press or to advance

to next track. Track numbers

show on display.

COMPACT

DIGITAL AUDIO

OPEN

MCD-9424JA

8 X OVERSAMPLING • 4 X 40 WATTS

LOUD

RPT

SCN

SHF

DISP

VOL

VOLAS/PS

BAND

SEL/

PWR

SHUFFLE SCANREPEAT

OPEN

5448-EOP.p65 7/23/99, 10:35 AM7

MCD 9424JA

Pause CD

Press to pause CD play. PAUS

shows in the display. Press

again to resume CD play.

Repeat the Same Track

Press RPT to continuously repeat

same track. Press again to stop

repeat.

Shuffle: Play all Tracks

Press SHF to play all tracks

on CD in random order one time.

Press again to stop shuffle play.

Note:

• Do not expose CD player to extremely

high or low temperatures.

• Avoid splashing water directly on the unit.

• Unit is not "water proof".

Scan (Preview all Tracks)

Press SCN to play first ten seconds

of each track on current CD. SCAN

appears in the display. Press again

to stop SCAN and listen to track.

RPT

SHF

SCN

5448-EOP.p65 7/23/99, 10:35 AM8

MCD 9424JA

Specifications

CD Player

Signal/noise ratio ....................................................................>86 dB

Frequency response .................................................. 20 Hz - 20 kHz

Channel separation ................................................................>65 dB

D/A converter........................................................................1 Bit/CH

Weather Radio

Tuning range .............................................. NOAA weather channels

.......................................... 162.400, 162.475, 162.550

FM Tuner

Tuning range .................................................... 87.5 MHz-107.9 MHz

FM mono sensitivity................................................................. 12 dBf

50 dB quieting sensitivity (stereo) ........................................... 16 dBf

Stereo separation @ 1 kHz ...................................................... 40 dB

AM Tuner

Tuning range ........................................................ 530 kHz-1720 kHz

Amplifier

Total system power....................................................160 watts peak

Power output................................................................front: 2 x 40W

rear: 2 x 40W

General

Power supply ....................................... 11-16 VDC, negative ground

Speaker output impedance ............................................... 4-8 Ohms

Fuses ..................................... fast blow AGC (0.5 amp and 10 amp)

Dimensions .........................7" x 7" x 2" (178mm x 178mm x 51mm)

Specifications subject to change without notice.

Problem Cause Corrective Action

ER-1 appears

on display

ER-2 appears

on display

ER-3 appears

on display

CD skips too

much

Can’t find

cause of

problem

Disc reading

malfunction

Disc loading

or eject

malfunction

High

temperature

Receiver

mount is not

solid or

backstrap

is not secure

Try a different disc. The

disc may be damaged

or dirty

Press RESET button.

Insert disc and try again

Wait until temperature

returns to normal

Check mounting and

backstrap, tighten if

needed

Call Jensen Technical

Assistance

(1-800-323-0221)

Troubleshooting

Limited One Year Warranty–USA and Canada

Length of Warranty. This warranty from Recoton Mobile

Electronics shall be in effect for a period of one year from the date

of the first consumer purchase.

Persons Protected. This warranty will be enforceable by the

original owner and any subsequent owners during the warranty

period so long as proof of date of purchase from an authorized

Jensen dealer is presented whenever warranty service is

required.

What is Covered. Except as otherwise specified below, this

warranty covers all defects in material and workmanship in this

product. The following are not covered: damage resulting from

accident, misuse, abuse, neglect, product modification, improper

installation, incorrect line voltage, unauthorized repair or failure to

follow instructions supplied with the product; damage occurring

during shipment (claims must be presented to the carrier);

elimination of marine static

or other electrical interferences; any product purchased outside

USA or Canada, or on which the serial number has been

defaced, modified or removed.

How You Can Get Service.

U.S. Purchasers. Please telephone Jensen at 1-800-323-4815.

We will either inform you of the name and address of an autho-

rized Jensen repair station which will service the product or will

advise you to send the product to a factory service center.

Canadian Purchasers. The product should be returned to the

Jensen dealer from whom it was purchased and such dealer

either will service or arrange for service of the product.

If shipment of the product is required, it should be packed

securely. The original dated bill of sale must always be included

with the product as proof of warranty coverage.

What We Will Pay For. We will pay for all labor and material

expenses required to repair the product, but you must pay any

labor costs for the removal and/or installation of the product. If the

product is shipped for warranty service, you must prepay the initial

shipping charges, but Jensen will pay the return shipping charges

if the product is returned to an address inside the USA or Canada.

Limitation of Implied or Statutory Warranties and Conditions.

All implied or statutory warranties and conditions, including

warranties or conditions of merchantability, fitness for particular

purposes and non-infringement, are limited in duration to the

length of this warranty.

Exclusion of Certain Damages. Jensen’s liability is limited to the

repair or replacement, at our option, of any defective product and

shall not include incidental or consequential economic damages

of any kind.

Some states and/or provinces do not allow limitations on how long

an implied warranty lasts and/or do not allow the exclusion or

limitation of incidental or consequential damages, so the above

limitations and exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state and province to

province.

Recoton Mobile Electronics

A Division of Recoton Audio Corporation

A RECOTON® COMPANY

1090 Emma Oaks Trail

Lake Mary, Florida 32746

5448-EOP.p65 7/23/99, 10:35 AM9

How to Install the MCD 9424JA Marine

AM/FM Stereo Radio/Compact Disc

Player

Contents

Technical Assistance

For technical assistance with the installation of the

MCD 9424JA, call 1-800-323-0221.

Installation

Welcome!

What you're holding in your hands is no ordinary owner's

manual. We've tried to make the instructions in this book

clear and easy to follow.

For your Jensen stereo to work right, it must be installed

correctly. This manual will show you how to install your new

stereo like a pro. It's a good idea to read all of these

instructions before you begin the installation. Most

installations are straightforward and can be handled by a

do-it-yourselfer with the right tools, patience, and the ability

to follow instructions. But, do-it-yourself installation isn't for

everyone. If you still don't feel confident after reading this

book, consider turning the installation job over to someone

better suited to it.

Warranty Service

If your Jensen stereo should ever require service, you will

need to have the original dated receipt. If you ever need to

return the unit for any reason, always include the receipt

with the product.

Installation.............................2

Before You Begin Installation..... 2

Tools and Supplies Needed ....... 2

Speaker Requirements .............. 2

Important Installation Note......... 2

• Upgrading your System ...... 2

Wiring.......................................3

• Fuse Adapters .................... 3

Disconnect Battery..................... 3

Connect Wires ........................... 3

Wiring Diagram .......................... 4

Testing ....................................5

Reconnect Battery ..................... 5

Test Power Wiring ...................... 5

Test Antenna Connection........... 5

Test Memory Wiring ................... 5

Set the Clock.............................. 5

Test Speaker Connections......... 6

Final Installation......................... 7

Protective Cover ........................ 7

Troubleshooting ...................8

• Securing Wires ................... 8

Reset Button .............................. 8

Specifications

and Warranty.........................9

Install wiring

(pages 4 and 5)

Final

Installation

(page 8)

Connect and

test radio

(pages 6 and 7)

5448-EIN.p65 7/23/99, 11:39 AM1

MCD 9424JA

Professional Tip

Before You Begin Installation

Before you begin, you will need tools, supplies and adapters. It is best to make sure you have

everything you need before you take your dashboard apart.

Installation

Tools and Supplies Needed

Basic Installation:

• Flat and Phillips screwdrivers

• Wire cutters

• Wire strippers

• Tools to remove existing radio (screw-

driver, socket wrench set or other tools)

• Electrical tape

Speaker Requirements

Only connect the MCD 9424JA to speakers

rated in the load impedance range of 4 to 8

ohms. Speakers with a load impedance less

than 4 ohms could damage the MCD 9424JA.

Install the MCD 9424JA in a well ventilated

location. Do not install the unit in a closed

box. If the unit is installed without adequate

ventilation, damage could occur due to

overheating.

Important Installation Note

Upgrading Your System

International Jensen makes a wide range

of marine stereo products that will make

your stereo system sound better, great or

INCREDIBLE!

Better Sound

Install a Jensen tape deck or CD player like

you’re doing now. High power units can make

your existing speakers sound better and play

louder.

Great Sound

Replace your existing speakers with Jensen

Marine speakers.

INCREDIBLE Sound

Jensen offers a full line of amplifiers, high-

power speakers and subwoofers that can turn

your boat into audio dynamite. You can go

loud, louder and loudest by selecting Jensen

components from your retailer.

COMPACT

DIGITAL AUDIO

SHUFFLESHUFFLE

OPEN

MCD-9424JA8 X OVERSAMPLING • 4 X 25WATTS

LOUD

RPT

SCN

SHF

DISP

PWR

VOL

AS/PS

BAND

SEL/

5448-EIN.p65 7/23/99, 11:39 AM2

MCD 9424JA

Professional Tip

Fuse Adapters

No convenient power wire? Install a fuse

adapter having a spade connector.

Fuse

Adapter

Fuse

Crimp on a matching connector and attach:

• Yellow wire–Fuse marked MAIN, BAT

or PWR

• Red wire–Fuse marked ACCY

(accessory), or RADIO

Wiring

Important

If wiring connections are made wrong, the

unit will not operate properly and it could be

damaged. Follow the installation instructions

carefully, or have the installation handled by

an experienced technician.

Connect Wires

Splice, crimp or solder the wires from the

receiver to the proper wire in the boat. Match

the wires according to the chart (below).

Function

LF+ Speaker

LF– Speaker

LR+ Speaker

LR– Speaker

RF+ Speaker

RF– Speaker

RR+ Speaker

RR– Speaker

Remote–Amp turn on

Ground

Ignition

Battery

Dimmer

Color

white

white/black

green

green/black

gray

gray/black

violet

violet/black

dark blue

black

red

yellow

orange

Wiring Color Codes

Disconnect Battery

Before you begin, always

disconnect the battery

negative terminal.

–

5448-EIN.p65 7/23/99, 11:39 AM3

MCD 9424JA

LF–

white/black

white

LF+

RF–

gray/black

gray

RF+

LR–

green/black

green

LR+

RR–

violet/black

violet

RR+

AMP

Red (RF)

White (LF)

Amplifier wiring

(See amplifier instructions)

RCA-to-RCA cables

(not supplied)

+–

Black

Orange

Yellow

Red

AMP

In-line

Fuse

(0.5-amp)

Filter

Box In-line

Fuse

(10-amp)

Antenna

Jack

Dark Blue

Red (RR)

White (LR)

Remote

Plug

Wiring Diagram

Fuses

When replacing a fuse, make sure new

fuse is correct type and amperage. Using

an incorrect fuse could damage radio. The

MCD 9424JA uses two fuses with in-line

fuse holders as part of rear wiring harness:

• 10 amp fast blow AGC (red wire).

• 0.5 amp fast blow AGC (yellow wire).

Memory

Connect to battery or 12 volt power

source that is always live.

The radio will not work if this

wire is not connected.

Accessory

Connect to existing radio wire or

radio fuse.

Ground

Connect to ground terminal.

Amp

Connect to the amplifier. If not

used, tape bare end of wire.

Go to “Testing” on page 5.

Dimmer

Connect to existing dimmer wire.

Note:

If a Dimmer Wire or

Illumination Circuit

cannot be found then

connect the "Dark Blue

Remote Lead" and the

"Orange Dimmer" wire

together.

5448-EIN.p65 7/23/99, 11:39 AM4

MCD 9424JA

✓

Testing

Before you finish the installation, you should do the following tests to make sure the wiring is correct

and everything is operating properly.

Test Antenna Connection

1. Press or . The

radio should tune to a

nearby station. If not,

check antenna con-

nection.

Test Memory Wiring

Test Power Wiring

1. Turn ignition switch on. The display should

light. If not, check the electrical connection

at the yellow and red wires.

Reconnect Battery

When wiring is complete,

reconnect the battery

negative terminal.

–

1. With the radio playing,

hold button 1 for five

seconds. The radio will

beep. You just stored the

current station in memory.

2. Turn the key off, then turn

the key on again.

4. Press button 1 again. It

should return to the station

that was playing before

(step 1). If not, make sure

the yellow wire is con-

nected properly.

3. Press or . The radio

will select a different

station.

2. Press

VOL

to increase

volume until you can

hear the radio playing.

Set the Clock

1. Press and hold DISP

button for 3 seconds

until display flashes.

2. Within 3 seconds, press

to change minutes,

to change hours.

2. Press PWR to turn the radio on. You will

see the radio display. If not, check electri-

cal connections to the red and yellow

wires.

VOL

5 Sec

DISP

012

M H

3 Sec

5448-EIN.p65 7/23/99, 11:39 AM5

MCD 9424JA

Test Speaker Connections

These tests make sure the speakers are connected right. If speakers don’t play at all, both wires

may not be connected. If the wrong speaker plays (you hear front speakers when you expect rear

speakers) make sure you connected the wires right.

Balance Fader

1. Press SEL four times.

2. Hold the

VOL

button until

the display shows BAL.R 15.

Only the right speakers should

be playing. If not, check the

wiring. Make sure you con-

nected the wires just like the

chart on page 6.

5. Press SEL five times.

6. Hold the

VOL

button until

the display shows

FAD.R 15.

Only the rear speakers should

be playing. If not, check the

wiring. Make sure you con-

nected the wires just like the

chart on page 6.

3. Press SEL four times

again.

4. Hold the

VOL

button until

the display shows BAL.L 15.

Only the left speakers should

be playing. If not, check the

wiring. Make sure you con-

nected the wires just like the

chart on page 6.

7. Press SEL five times again.

8. Hold the

VOL

button until

the display shows FAD.F 15.

Only the front speakers should

be playing. If not, check the

wiring. Make sure you con-

nected the wires just like the

chart on page 6.

SEL/

VOL

SEL/

VOL

SEL/

VOL

SEL/

VOL

Once everything is operating correctly, perform final installation described on page 7.

5448-EIN.p65 7/23/99, 11:39 AM6

MCD 9424JA

Final Installation

1. Slide radio chassis into half-sleeve.

2. Install the supplied back strap and secure.

3. Reinstall any items you removed from the dashboard.

4. Install protective faceplate cover.

COMPACT

DIGITAL AUDIO

STST

SHUFFLE

OPEN

MCD-9424JA

8 X OVERSAMPLING • 4 X 25WATTS

LOUD

RPT

SCN

SHF

DISP

PWR

VOL

AS/PS

BAND

SEL/

Remove Before

Installation

Apply

adhesive

dot

Nut

(supplied)

Important

Excessive skipping may result if the unit is

installed at an angle of more than 15

15° Max.

Protective Cover

The translucent rubber protective cover slips

over the faceplate to provide protection

against water. You can access controls when

the cover is installed. Cover must be removed

to open the flip-over panel and to insert and

eject CDs.

COMPACT

DIGITAL AUDIO

SHUFFLESHUFFLE

OPEN

MCD-9424JA

8 X OVERSAMPLING • 4 X 25WATTS

LOUD

RPT

SCN

SHF

DISP

PWR

VOL

AS/PS

BAND

SEL/

Note:

Always install a back strap to the head unit. Proper installation

is essential for good performance and reliability.

5448-EIN.p65 7/23/99, 11:39 AM7

MCD 9424JA

Troubleshooting

In case of abnormal operation:

Use a pencil tip (or other non-metallic object)

to press the RESET button

Reset Button

Reset

Button

Problem Cause Corrective Action

Does not operate (display

does not light)

No speakers operate

(display lights normally)

Not all speakers operate

Blows fuses

Can’t find cause of problem

No power to red wire (12V with

key on)

Inline fuse blown

Speaker wires not connected

Incorrect splices or connections

Speaker wires shorting to chassis

ground or to each other

Power wire shorting to ground

Speaker wires shorting to ground

Incorrect fuse

Check connection

Check boat fuse

Replace fuse

Connect speaker wires

Check all splices and connections

Check splices, insulate all bare wires

Insulate wire

Install fuse of correct rating

Call Jensen Technical Assistance

(1-800-323-0221)

Professional Tip

Securing Wires

Be proud of your installation! Use wire ties to

bundle wires together when possible. (But

never bundle speaker wires and power wires

together!)

Secure loose wires to the boat to make sure

they don’t rub or rattle.

5448-EIN.p65 7/23/99, 11:39 AM8

MCD 9424JA

Recoton Mobile Electronics

A Division of Recoton Audio Corporation

A RECOTON® COMPANY

1090 Emma Oaks Trail

Lake Mary, Florida 32746

Limited One Year Warranty–USA and Canada

Length of Warranty. This warranty from Recoton Mobile

Electronics shall be in effect for a period of one year from the

date of the first consumer purchase.

Persons Protected. This warranty will be enforceable by the

original owner and any subsequent owners during the warranty

period so long as proof of date of purchase from an authorized

Jensen dealer is presented whenever warranty service is

required.

What is Covered. Except as otherwise specified below, this

warranty covers all defects in material and workmanship in this

product. The following are not covered: damage resulting from

accident, misuse, abuse, neglect, product modification,

improper installation, incorrect line voltage, unauthorized repair

or failure to follow instructions supplied with the product;

damage occurring during shipment (claims must be presented

to the carrier); elimination of boat static or other electrical

interferences; any product purchased outside USA or Canada,

or on which the serial numberhas been defaced, modified or

removed.

How You Can Get Service.

U.S. Purchasers. Please telephone Jensen at

1-800-323-4815. We will either inform you of the name and

address of an authorized Jensen repair station which will

service the product or will advise you to send the product to a

factory service center.

Canadian Purchasers. The product should be returned to the

Jensen dealer from whom it was purchased and such dealer

either will service or arrange for service of the product.

If shipment of the product is required, it should be packed

securely. The original dated bill of sale must always be

included with the product as proof of warranty coverage.

What We Will Pay For. We will pay for all labor and material

expenses required to repair the product, but you must pay any

labor costs for the removal and/or installation of the product. If

the product is shipped for warranty service, you must prepay

the initial shipping charges, but Jensen will pay the return

shipping charges if the product is returned to an address inside

the USA or Canada.

Limitation of Implied or Statutory Warranties and Condi-

tions. All implied or statutory warranties and conditions,

including warranties or conditions of merchantability, fitness for

particular purposes and non-infringement, are limited in

duration to the length of this warranty.

Exclusion of Certain Damages. Jensen’s liability is limited to

the repair or replacement, at our option, of any defective

product and shall not include incidental or consequential

economic damages of any kind.

Some states and/or provinces do not allow limitations on how

long an implied warranty lasts and/or do not allow the exclusion

or limitation of incidental or consequential damages, so the

above limitations and exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state and province to

province.

Specifications

CD Player

Signal/noise ratio ......................................................................................................................>86 dB

Frequency response .................................................................................................... 20 Hz - 20 kHz

Channel separation...................................................................................................................>65 dB

D/A converter ..........................................................................................................................1 Bit/CH

Weather Radio

Tuning range .................................................................................................NOAA weather channels

..................................................................................................................162.400, 162.475, 162,550

FM T uner

Tuning range ...................................................................................................... 87.5 MHz-107.9 MHz

FM mono sensitivity ...................................................................................................................12 dBf

50 dB quieting sensitivity (stereo)..............................................................................................16 dBf

Stereo separation @ 1 kHz.........................................................................................................40 dB

AM T uner

Tuning range .......................................................................................................... 530 kHz-1720 kHz

Amplifier

Total system power ......................................................................................................160 watts peak

Power output..................................................................................................................front: 2 x 40W

rear: 2 x 40W

General

Power supply ..........................................................................................11-16 VDC, negative ground

Speaker output impedance.................................................................................................. 4-8 Ohms

Fuses ........................................................................................fast blow AGC (0.5 amp and 10 amp)

Dimensions ........................................................................... 7" x 7" x 2" (178mm x 178mm x 51mm)

Specifications subject to change without notice.

5448-EIN.p65 7/23/99, 11:39 AM9

Jensen MCD9424JA Operating instructions

Brand: Jensen

Model: MCD9424JA

Category: Car media receivers

Type: Operating instructions

Download PDF

report

Jensen MCD9424JA Operating instructions

Jensen MCD9424JA Operating instructions

Related papers

Other documents