XPOWER AP-1031A User manual

Brand
XPOWER
Model
AP-1031A
Type
User manual

XPOWER AP-1031A is an electric air pump designed for quick and convenient inflation and deflation of inflatable items. With its powerful motor and user-friendly design, this air pump is an ideal tool for a variety of applications, including inflating air mattresses, pool floats, and other inflatable products.

The AP-1031A features two dedicated ports for inflation and deflation, allowing you to easily switch between tasks. It comes with a set of nozzles to accommodate different valve types, ensuring compatibility with most inflatable items. The pump's compact size and lightweight design make it easy to handle and portable for use both indoors and outdoors.

XPOWER AP-1031A is an electric air pump designed for quick and convenient inflation and deflation of inflatable items. With its powerful motor and user-friendly design, this air pump is an ideal tool for a variety of applications, including inflating air mattresses, pool floats, and other inflatable products.

The AP-1031A features two dedicated ports for inflation and deflation, allowing you to easily switch between tasks. It comes with a set of nozzles to accommodate different valve types, ensuring compatibility with most inflatable items. The pump's compact size and lightweight design make it easy to handle and portable for use both indoors and outdoors.

SAFETY INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS PRODUCT WITH ANY SOLID-STATE
SPEED CONTROL DEVICE.
1.
To avoid risk of injury, do not direct stream of air at face or body.
2.
To avoid risk of electric shock, do not drop unit into water, do not expose to rain, or stand on a wet surface when using.
3.
To avoid burning, do not operate the Air Pump more than 10 minutes continuously.
4.
Avoid sand, small rocks and other debris from being sucked into the INFLATION PORT or DEFLATION PORT of the Air Pump.
5.
The power cord cannot be replaced. If the cord is damaged, the appliance should be scrapped.
6.
The Air Pump should never be left unattended when plug in.
7.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.
8.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT
1. Do not operate the Air Pump more than 10 minutes continuously, as overheating may occur and pump may automatically shut
off
for your safety.
2. Unplug electrical power cord when not in use.
3. Follow the inflating and deflating guidelines included with your inflatable product.
READ AND SAVE THESE INSTRUCTIONS
Operating Instructions:
Carefully follow instructions below. Never exceed inflatable item’s recommended pressure.
Bursting caused by excessive pressure may cause serious injury.
TO INFLATE:
1. Open air valve on inflatable item.
2. PIug power cord into 120 volt AC electrical outlet.
3. Select suitable nozzle to fit inflatable valve.
4. Push the nozzle firmly into the INFLATION PORT on the pump.
5. Push pump with nozzle firmly into valve on INFLATABLE ITEMS
6. Turn on the pump to begin inflation.
TO DEFLATE:
1. Open air valve on inflatable item.
2. PIug power cord into 120 volt AC electrical outlet.
3. Select suitable nozzle to fit inflatable valve.
4. Push the nozzle firmly into the DEFLATION PORT on the pump.
5. Push pump with nozzle firmly into valve on INFLATABLE ITEMS
6. Turn on pump to deflate.
Maintenance
1.
Unplug or disconnect the appliance from the power supply before
servicing.
2.
Store indoors and keep dry.
3.
To keep the Air Pump clean, wipe with a dry or damp cloth.
ELECTRIC AIR PUMP
MODEL No. AP-1031A
OWNER’S
MANUAL
  • Page 1 1

XPOWER AP-1031A User manual

Brand
XPOWER
Model
AP-1031A
Type
User manual

XPOWER AP-1031A is an electric air pump designed for quick and convenient inflation and deflation of inflatable items. With its powerful motor and user-friendly design, this air pump is an ideal tool for a variety of applications, including inflating air mattresses, pool floats, and other inflatable products.

The AP-1031A features two dedicated ports for inflation and deflation, allowing you to easily switch between tasks. It comes with a set of nozzles to accommodate different valve types, ensuring compatibility with most inflatable items. The pump's compact size and lightweight design make it easy to handle and portable for use both indoors and outdoors.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI