galgus RIX450 Wireless Router Installation guide

Brand: galgus

Model: RIX450 Wireless Router

Type: Installation guide

*Pls insert SIM card first before power on for 4G network connection

*The QIG and photos are for instruction and reference only,pls refer to the actual

product for actual details

1. Device Connection

Quick Installation Guide

Wireless Router

3. Set wired broadband connection, click “Advanced Settings”--->”WAN”---> “WAN Settings”

1.The device uses external power adapter, power socket should be near and easy to reach

2.The working ambient temperature should be 0-50

3.In thunderstorm weather pls disconnect all power and wire connection to avoid lightning damage

4.Keep away from heat source and keep good ventilation

5.Pls pay attention to waterproof during storage, transportation and operation

6.Pls use the original power adapter attached in the package

2.1 Connect to PC wirelessly

2.2 Network Configuration

1. Use explorer to visit http://192.168.188.253, below web login page will pop-up,

input default user name“admin” and password “admin” to login.

Double click “Wireless Network Connection” on PC, in the pop-up wireless SSID list,

select “Wirelss 2.4G”, click “Connect”then enter the password in the pop-up password

dialogue box(Default password 66666666), click “OK” to connect.

(Mobile phone can connect to WIFI from setting menu

2. WEB Configuration

SYS

GreenConnect to Internet

BlueDevice power on, no Internet access

Corresponding port’s LED lights on or blinks when connects to other devices

LED Indicator Normal Status

2.Set or change WIFI password, click “Network Map” , under menu

“Advanced Settings” ---> “2.4GHz” “5.8GHz” you can change wireless password

(Default 66666666), 2.4G default SSID, 5.8G default SSID.

WARNING

Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However. there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

--Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver

--Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in

conjunction with any other antenna or transmitter

RF Exposure Statement

To maintain compliance with FCC's RF Exposure guidelines, This equipment

should be

installed and operated with minimum distance of 20cm the radiator your body. This

device

and its antenna(s) must not be co-located or operation in conjunction with any other

antenna nr transmitter

galgus RIX450 Wireless Router Installation guide

Brand: galgus

Model: RIX450 Wireless Router

Type: Installation guide

Download PDF

report