Assa Abloy OS-HS Aluminum Continuous Hinges Operating instructions

_OS_HS

OS_HS-HD1_CUT Rev 1 - 09.18.17

PemkoHinge® Continuous Geared Hinges:

Half Surface Hinges: Offset

AVAILABLE FINISHES: C, D

CLEARANCE: 0 to 1/8” (0 mm to 3.2 mm)

WIDTH: 2-7/8” (73.0 mm)

CAP WIDTH: 25/32” (19.8 mm)

HEIGHT: 29/32” (23.0 mm)

(to top cap/frame edge side)

HEIGHT: 1-29/32” (48.4 mm)

(to flange/frame edge side)

C (Clear Anodized)

D (Dark Bronze Anodized)

(19.8)

25 32

(23.0)

29 32

(3.2)

(73.0)

29 32

(48.4)

17 32

(48.4)

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

TITLE:

PREPARED FOR:

PREPARED BY:

DATE:

COMMENTS:

Architectural

Door Accessories