HOMEIBRO HD-SA-SB30 Operating instructions

Brand
HOMEIBRO
Model
HD-SA-SB30
Type
Operating instructions

HOMEIBRO HD-SA-SB30 is a vanity sink base cabinet with multiple compartments and adjustable shelves, perfect for organizing and storing bathroom essentials. Its durable construction ensures longevity, while its stylish design complements any bathroom decor. The cabinet features soft-close hinges for smooth and quiet operation, and includes all necessary hardware for easy assembly.

HOMEIBRO HD-SA-SB30 is a vanity sink base cabinet with multiple compartments and adjustable shelves, perfect for organizing and storing bathroom essentials. Its durable construction ensures longevity, while its stylish design complements any bathroom decor. The cabinet features soft-close hinges for smooth and quiet operation, and includes all necessary hardware for easy assembly.

Box side panel - left
Box side panel - right
Box bottom panel
Box back panel
Face frame
Toe kick panel
PART
A1
A2
B
C
D
E
DESCRIPTION
Door panel
J
A1
C
BOX SIDE PANEL - LEFT
A2
BOX SIDE PANEL - RIGHT
BOX BACK PANEL
B
BOX BOTTOM PANEL
TOE KICK PANEL
J
DOOR PANEL
D
FACE FRAME
Vanity Sink Base Cabinet
Instruction Manual
MODEL: SB30-E SB33-E SB36-E
VS30-E VS36-E
- 1 -
HARDWARE CONTENTS
Included:
Included:
Soft -close hinge x 4
CC
1/2” Flat Head Phillips Screw x 8
3/4” Round Head Phillips Screw x 4
Wood corner block x 4
Corner brace x 13
1” Flat Head Phillips Screw x 8
DD
EE
1/2”
Round Head Phillips Screw x 52
Included:
1/2”
3/4”
Be careful the length of the screws.
1/2”
CAUTION
Do not tighten all the screws until all the adjacent parts have been properly connected. Please
do not throw away extra screws.Please refer to the actual product for the screw hole position.
Follow the instructions in the instruction manual carefully and strictly to ensure that the
product is assembled and operates as intended.
The hardware should be kept away from children when unpacking and assembling this
product. Two adults are recommended for assembly.
Be sure to carefully remove all parts from the carton and ensure that there are no damages
to any of them.
- 2 -
1” Flat head Phillips screw x 4 Rubber bumper x 4
HH
GG
INSTALLATION OVERVIEW
TOOLS REQUIRED (NOT INCLUDED)
1
A1
EE
Use 1/2” round head phillips screw x 10
- 3 -
3a
3b
A2
C
3
A2
EE
Use 1/2” round head phillips screw x 2
C
2
EE
A2
Use 1/2” round head phillips screw x 10
4b
4a
A2
C
A1
A2
A1
C
EE
Rotate
Use 1/2” round head phillips screw x 2
- 4 -
6a
6b
A2
B
A1
C
D
EE
A2
A1
B
C
D
7a
A2
A1
C
D
E
B
Use 1/2” round head phillips screw x 8
Inside
5
A2
A1
B
C
5a 5
5b
A2
A1
B
C
7b
Bottom
Use 1/2” round head phillips screw x 20
B
A2
C
D
E
EE
EE
A1
- 5 -
J
CC
CC
8
Use 1/2” flat head phillips screw x 4
Use 3/4” flat head phillips screw x 4
9a
9b
Upright
GG
- 6 -
a
DD
a
If the door is not level when it is installed, the
customer will need to turn the screw clockwise
to extend the hinge or counterclockwise to
shorten the hinge.
Some products may have hinges pre-installed.
Use 1” round head phillips screw x 8
(2 screws for 1 corner block)
DD
x4
10a 10b
Dear customers,
Thank you for purchasing our product. If you require assistance, please contact the
customer service team at the retailer where you purchased the product. The customer
service team will be happy to assist you.
a
a
11b
11a HH HH
x4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

HOMEIBRO HD-SA-SB30 Operating instructions

Brand
HOMEIBRO
Model
HD-SA-SB30
Type
Operating instructions

HOMEIBRO HD-SA-SB30 is a vanity sink base cabinet with multiple compartments and adjustable shelves, perfect for organizing and storing bathroom essentials. Its durable construction ensures longevity, while its stylish design complements any bathroom decor. The cabinet features soft-close hinges for smooth and quiet operation, and includes all necessary hardware for easy assembly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents