2. Kwikset
  3. 488CV26

Kwikset 488CV26, 488CV11PCP Operating instructions

  • I've reviewed the Installation Guide for the Kwikset BP Dummy Knob. This document provides clear, step-by-step instructions, including a drilling template, to help you install the knob correctly. I'm ready to assist you with any questions about the process or the device itself.
  • What tools are required for installation?
    What parts are included in the box?
    Where should the template be placed on the door?
23/8" (60 mm) Fold • Doble
Fold • Doble23/4" (70 mm)
Centerline
Linea central
Face of the door
Frente de la puerta
Edge of the door
Borde de la puerta
3/32"
2 mm
Installation Guide
Guía de instalación
18003275625 • www.kwikset.com
Cut out template and fold along
fold line for desired backset. Place
fold line on edge of door with
centerline 38" (965 mm) from loor.
Recorte la plantilla y doblela a lo
largo del doblez con la distancia
al centro deseada. Coloque el
doblez a lo largo del borde de
la puerta con la línea central a
unas 38" (965mm) del suelo.
Mark holes
Marque los oriicios
Drill holes
Perfore los oriicios
63991 / 01
Dummy Knob BP
Drilling Template
Plantilla de perforación
Parts in the box
Piezas en la caja
Required tools
Herramientas necesarias
Instructions continue on reverse
Las instrucciones continúan en el reverso de la hoja
3/32" (2 mm)
38"
965 mm
loor
piso
edge of door
borde de la puerta
1/2" (13 mm)
deep
profundidad
2x
2x
Knob
Perilla
Screws
Tornillos
A B
A
B C
Prepare door
Prepare la puerta
1
23/8" (60 mm)Fold • Doble
Fold • Doble 23/4" (70 mm)
Centerline
Linea central
Face of the door
Frente de la puerta
Edge of the door
Borde de la puerta
Register your product at www.kwikset.com/productregistration
Rate your product at www.kwikset.com/reviews
Registre su producto en www.kwikset.com/productregistration
Clasiique su producto en www.kwikset.com/reviews
©2015 Spectrum Brands, Inc.
Drilling Template
Plantilla de perforación
A
B (2x)
Install knob
Instale la perilla
2
/