Atdec SpacePole Datasheet

Brand: Atdec

Model: SpacePole

Category: Holders

Type: Datasheet

This manual is also suitable for

SPIPF245-BLACK-02

Securing the iPad to the MultiGrip™

Install selected Mounting Option before securing the iPad

4

A

Place iPad above the

MultiGrip™ (1). Gently

press the iPad in place.

If power cable is needed

insert it before placing

iPad in place!

B

Place the SafeGuard

Frame (2), from top.

Align the holes for the

tamper proof screws (5).

C

Using the tool (6),

secure the SafeGuard

Frame with tamper proof

screws (5), in four points.

D

The iPad is now secured

and ready to be used.

iPad SafeGuard Frames

Installation Instructions

®

snoitpO gnitnuoM tnetnoC xoB

2

3

(5)

M4/6 tamper-proof screws (x 4)

(6)

2,5mm Allen key with hole for pin (x 1)

(4)

M4/4 machine screws with cross recess (x 4)

(3)

M4/5 counter-sink screws with hex recess (x 2)

(1)

MultiGrip™ plate for iPad, multiple

mounting options

DuraTilt

®

mounting

Uses two screws (3) to attach the

MultiGrip™ (1) to a DuraTilt™

connection.

Tool (6) is included for use.

VESA mounting

Uses four screws (4) to

attach the MultiGrip™ (1) to a

VESA 75 monitor plate. Tool is

not included. Use a Phillips head

screw-driver. VESA 100

mounting also possible.

Wall mounting

Uses four self-tapper screws to

attach the MultiGrip™ (1) to a

wall/desk. Tool/screws are not

included.

Maximum diameter for the

screws: Ø5mm.

SafeGuard Frame

(2)

1
2

Atdec SpacePole Datasheet

Brand: Atdec

Model: SpacePole

Category: Holders

Type: Datasheet

This manual is also suitable for

SPIPF245-BLACK-02

Other documents