Kramer Electronics W-5PS Installation guide

Kramer Electronics
Brand
Kramer Electronics
Model
W-5PS
Category
Electrical wallplates
Type
Installation guide

Kramer Electronics W-5PS is a passive space-saving 5-port 12V DC or 5V DC power supply distributor. It replaces up to five 12V/5V adapters for active modules that would otherwise each require a separate 12V/5V DC power adapter. The W-5PS is ideal for powering active inserts (for example, the Kramer F-110) and/or mounting boxes for Ackermann floor boxes (for example, the Kramer F-121). It features one 12V/5V DC INPUT on a 2-pin terminal block connector and five sets of DC OUT 12V/5V power outputs (DC OUT 1, DC OUT 2, DC OUT 3, DC OUT 4 and DC OUT 5) on 2-pin terminal block connectors.

Kramer Electronics W-5PS is a passive space-saving 5-port 12V DC or 5V DC power supply distributor. It replaces up to five 12V/5V adapters for active modules that would otherwise each require a separate 12V/5V DC power adapter. The W-5PS is ideal for powering active inserts (for example, the Kramer F-110) and/or mounting boxes for Ackermann floor boxes (for example, the Kramer F-121). It features one 12V/5V DC INPUT on a 2-pin terminal block connector and five sets of DC OUT 12V/5V power outputs (DC OUT 1, DC OUT 2, DC OUT 3, DC OUT 4 and DC OUT 5) on 2-pin terminal block connectors.

The Kramer W-5PS
Congratulations on purchasing your Kramer dual insert W-5PS which is a passive space
saving 5-port 12V DC or 5V DC power supply distributor (either 12V DC to all the
outputs or 5V DC to all the outputs, depending on the voltage of the power adapter). It
replaces up to five 12V/5V adapters for active modules that would otherwise each
require a separate 12V/5V DC power adapter.
The W-5PS is ideal for powering active inserts (for example, the Kramer F-110) and/or
mounting boxes for Ackermann floor boxes (for example, the Kramer F-121).
The W-5PS:
• Front panel has one green POWER LED that illuminates when power is connected
to the input (not shown in
Figure 1)
• Rear includes one 12V/5V DC INPUT on a 2-pin terminal block connector that
connects to the DC power supply (for example, a wall transformer), and five sets
of DC OUT 12V/5V power outputs (DC OUT 1, DC OUT 2, DC OUT 3, DC
OUT 4 and DC OUT 5) on 2-pin terminal block connectors that connect to the
active modules (see
Figure 1)
• Outputs 12V/5V DC and supplies a maximum of 500mA to each of the five
outputs, simultaneously (see
Figure 1 and Figure 2)
Make sure that the DC input power supply to the W-5PS is capable of providing the total
current required by all the outputs (a maximum of 2.5A)
Figure 1 shows the W-5PS rear pinout:
DC OUT 3
DC OUT 4
DC OUT 5
DC OUT 1
DC OUT 2
12V/5V
DC INPUT
W-5PS Rear View
Figure 1: W-5PS Rear Pinout
Figure 2 shows the W-5PS powering the Kramer F-021 and F-571 Ackermann mounting
boxes as well as the Kramer F-110 dual insert, all of which can be mounted in an
Ackermann floor box:
DC OUT 3
DC OUT 4
DC OUT 5
DC OUT 1
DC OUT 2
12V/5V
DC INPUT
W-5PS Rear View
F-021: 12V DC 70mA
F-571: 12V DC 250mA
12V DC 250mA
F-110
12V DC 250mA
To Wall
Transformer
Figure 2: W-5PS Fitted in an Ackermann Floor Box, Powering the Kramer F-110
W-5PS
Power Supply
Installation Instructions
For the latest information on our products and a list of Kramer distributors,
visit our Web site at
Uwww.kramerelectronics.comU
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000758 REV 1
  • Page 1 1
  • Page 2 2

Kramer Electronics W-5PS Installation guide

Kramer Electronics
Brand
Kramer Electronics
Model
W-5PS
Category
Electrical wallplates
Type
Installation guide

Kramer Electronics W-5PS is a passive space-saving 5-port 12V DC or 5V DC power supply distributor. It replaces up to five 12V/5V adapters for active modules that would otherwise each require a separate 12V/5V DC power adapter. The W-5PS is ideal for powering active inserts (for example, the Kramer F-110) and/or mounting boxes for Ackermann floor boxes (for example, the Kramer F-121). It features one 12V/5V DC INPUT on a 2-pin terminal block connector and five sets of DC OUT 12V/5V power outputs (DC OUT 1, DC OUT 2, DC OUT 3, DC OUT 4 and DC OUT 5) on 2-pin terminal block connectors.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents