Page is loading ...
Base Foot Spacer
(36)–2
3/8" Star
Washer (11)–6
#8 x 1/2"
Screw (1)–14
#8 x 1" Tek Screw
(2)–4
3/8" Nut (10)–4
1/4" Star
Washer (12)–2
5/16" Star
Washer (9)–8
5/16" x 3/4"
Patch Bolt (5)–4
5/16" x 1 1/2"
Patch Bolt (4)–6
3/8" x 5 1/2" Patch Bolt (7)–2
1/4" x 1/2"
Patch Bolt (8)–2
3/8" x 2 1/4" Latch Patch Bolt (6)–1
3/8" x 2" Bolt (3)–1
1/4" x 1 3/4"
Patch Bolt (91)–2
3/8" x 3" Bolt (67)–2
3/8" x 2 1/4" Patch Bolt (31)–2
3/8" x 3 3/4" Patch Bolt (97)–2
For detailed instructions, see the Userʼs Manual. Note: The underside of the walking belt is coated with high-
performance lubricant. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth
and a mild, non-abrasive cleaner.
NordicTrack
®
A2550 Pro Treadmill • Model No. 831.24967 • Revised 01/10/11
QUICK ASSEMBLY GUIDE
3. Route the Upright Wire (85) through the Right
U
pright (83).
4. Attach the Right Upright (83). Repeat this step
on the other side.
2
1. Pull the Upright Wire (85) out of the indicated
hole. Attach the Base Feet (92).
2
9
2
92
2
2
2
92
92
85
36
36
Hole
2. Attach a Wheel (95).
67
95
10
96
96
Wire Tie
8
5
83
83
11
7
11
31
97
5. Attach a Wheel (95), and then attach the Base
Cover (84).
84
1
1
67
95
10
96
96
6. Attach the Frame Crossbar (107).
9. Attach the console assembly.
8. Connect the Upright Wire (85) to the console
wire.
7. Route the console wire through the Right
Handrail (79). Attach the Right Handrail and the
Left Handrail (not shown).
3
107
91
91
79
4
8
12
9
Console
Wire
Console
Wire
Remove
Wire
Tie
85
5
4
4
9
9
5
Console
Assembly
10. Attach the Left and Right Accessory Trays (101,
104).
12. Attach the Storage Latch (51).
11. Attach the Upright Covers (87, 90; 86, 88).
NordicTrack is a registered trademark of ICON IP, Inc.
Part No. 311574 R0111A Printed in USA © 2011 ICON IP, Inc.
104
1
1
101
1
1
87
1
90
86
88
1
3
10
10
51
Large Barrel
6
/
