CEN-TECH Item 63603-UPC 193175326935 is a Circuit Tester that allows you to test 6-volt or 12-volt fuses, wiring, or other circuitry. It features a 60-inch lead wire, a 3-1/2-inch probe, and an 8-inch handle. The device has a clamp capacity of 20 amps and uses a 12VDC/3W bulb. To use the Circuit Tester, connect the cord clamp to one side/end of the fuse, wire, or battery post, then gently touch the tip of the probe against the other side/end of the object being tested. If the bulb illuminates, it indicates there is electricity flowing through the circuit.
CEN-TECH Item 63603-UPC 193175326935 is a Circuit Tester that allows you to test 6-volt or 12-volt fuses, wiring, or other circuitry. It features a 60-inch lead wire, a 3-1/2-inch probe, and an 8-inch handle. The device has a clamp capacity of 20 amps and uses a 12VDC/3W bulb. To use the Circuit Tester, connect the cord clamp to one side/end of the fuse, wire, or battery post, then gently touch the tip of the probe against the other side/end of the object being tested. If the bulb illuminates, it indicates there is electricity flowing through the circuit.
CEN-TECH Item 63603-UPC 193175326935 is a Circuit Tester that allows you to test 6-volt or 12-volt fuses, wiring, or other circuitry. It features a 60-inch lead wire, a 3-1/2-inch probe, and an 8-inch handle. The device has a clamp capacity of 20 amps and uses a 12VDC/3W bulb. To use the Circuit Tester, connect the cord clamp to one side/end of the fuse, wire, or battery post, then gently touch the tip of the probe against the other side/end of the object being tested. If the bulb illuminates, it indicates there is electricity flowing through the circuit.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI