Supermicro C2SBA User manual

Category
Motherboards
Type
User manual

This manual is also suitable for

An Important Note to the User
The Silk Screen Label for SATA Ports 0~3
On the C2SBA/C2SBA+/C2SBA+II/C2SBE Revision 1.2 Motherboard
The silk screen label for SATA Ports 0~3 on PCB Rev. 1.2 motherboards is shown below:
I-SATA4
I-SATA5
I-SATA3
I-SATA2
I-SATA1
I-SATA0
The correct silk screen label for these SATA ports should be as follows:
Addendum-C2SBA PCB Rev. 1.2-5/1/2008
This silk screen label change applies to PCB Revision 1.2 motherboards only and has been cor-
rected in subsequent motherboard revisions.
PCB Revision 1.2
PCB Revision 1.2A
I-SATA4
I-SATA5
I-SATA
1
I-SATA0
I-SATA3
I-SATA2
  • Page 1 1

Supermicro C2SBA User manual

Category
Motherboards
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI