Samsung AH68-01957C User manual

Category
DVD players
Type
User manual

This manual is also suitable for

DVD HOME
THEATERSYSTEM
HT-X50
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com
AH68-01957C
REV:00
DIGITAL
_dtts
Digital Surround
_ynet +
AUDIO/VIDEO DIGITAL AUDIO OlSC PLAYBACK
_f[=] I=[o][dl[=.]inn
Safety Warnings
Z_ 1 RiSK OF ELECTRIC SHOCK.
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER (or BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
I CLASS 1 LASER PRODUCT 1
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
Note to CATV system installer
This reminder is provided to call the CATV system
installer's attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall
be connected to the grounding system of the building,
as close to the point of cable entry as practical.
WARNING
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
CAUTION
Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
Important Safety Instructions
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
1!) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specifi ed by
the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for Iong periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus. Service is also required
if the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Precautions
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on modules or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the Home Theater to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove
the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect the AC main plug from
the wail outlet.
Voltage peaks due to lightning could damage the unit.
The Mains plug is used as a disconnect device and shall
stay readily operable at any time.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
--O_" J_'.',"" '.
Protecttheplayerfrommoisture(i.e,vases),andexcessheat
(e g.firepIace)or equipmentcreatingstrongmagneticor electricfields
(i.espeakers...).Disconnectthe powercablefromtheACsupplyifthe
playermalfunctions.Yourplayeris notintendedfor industrialuse.
Useof thisproductisfor personaluseonly.
Condensationmayoccurifyourplayeror dischas beenstoredincold
temperatures.
if transportingthe playerduringthewinter,wait approximately2 hours
untiltheunithasreachedroomtemperaturebeforeusing.
The batteries used with this product contain chemicals that are
harmful to the environment.
Do not dispose of batteries in the general household trash.
Features
Multi-Disc Playback & FM Tuner
The HT-X5O combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO CD,
MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD-R/RW, with a sophisticated FM tuner, all in a single player.
DVD-Audio compatible
Experience the super high-quality audio perfom_ance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range,
low-level resolution and high-frequency detail.
USB Host Play
You can enjoy media files such as pictures, movies and tunes saved in an MP3 player, digital camera or USB memory
by connecting the storage device to the USB port of the home theater.
Dolby Pro Logic II
Dolby Pro Logic II is a form of multi-channel audio signal decoding technology that improves upon existing
Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency
5.I channel sound.
TV Screen Saver Function
If the main unit remains in stop mode for 3 minutes, Samsung logo appears on TV screen.
The HT-X50 automatically switches itself into the power saving mode after 20 minutes in the Screen Saver mode.
Power Saving Function
The HT-X5O automatically shuts itself off after 20 minutes in Stop mode.
Customized TV Screen Display
The HT-X5O allows you to select your favorite image during JPEG or DVD playback and set it as your background
wallpaper.
HDMI
HDM! transmits DVD video and audio signals simultaneously, and provides a clearer picture.
AV SYNC Function
Video may lag behind the audio if the unit is connected to a digital TV.
To compensate for this, you can adjust the audio delay time to sync up with the video.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate the main unit using a Samsung TV rernote control, by connecting the
Home Theater to a SAMSUNG TV using an HDM! Cable. (This is only available with SAMSUNG TVs
that support Anynet+.)
Contents
Safety Warnings ............................................................ 2
Precautions .................................................................... 3
Features......................................................................... 4
Notes on Discs .............................................................. 6
Description ..................................................................... 8
Connecting the Speakers ............................................ 12
Connecting the Optional Wireless
Receiving Amplifier ...................................................... 14
Connecting the Video Out to your TV .........................16
HDMI Function ............................................................. 17
Connecting Audio from External Components ............18
Connecting the FM Antenna........................................ 20
Before Reading the User's Manual .............................21
Before Using YourHome Theater ...............................22
Disc Playback .............................................................. 23
MP3/WMA-CD Playback ............................................. 24
JPEG File Playback ..................................................... 25
DivX Playback ............................................................. 26
Using the Playback Function....................................... 28
Displaying Disc Information ...................................... 28
Checking the Remaining Time ..................................29
Fast Playback ........................................................... 29
Stow Playback .......................................................... 29
Skipping Scenes/Songs ............................................ 30
Repeat Playback....................................................... 31
To Select a Repeat Playback Mode in the Disc
Information Screen ................................................... 31
A-B Repeat Playback ................................................ 32
Step Function............................................................ 32
Angte Function.......................................................... 33
Zoom (Screen Enlarge) Function .............................33
EZ VIEW Function .................................................... 34
Bonus Group ............................................................. 34
Navigating Pages...................................................... 34
Audio Language Selection Function .........................35
Subtitle Language Selection Function......................35
Moving Directly to a Scene/Song .............................36
Using the Disc Menu ................................................ 37
Using the Title Menu................................................. 37
Playing Media Files using the USB HOST Feature._..38
Settings ........................................................................ 40
Setting the Language ..............................................40
Setting TV Screen type ........................................... 41
Setting Parental Controls (Rating Level).................42
Setting the Password ..............................................42
Setting the Wallpaper .............................................. 43
To SeIect One of the 3 Wallpaper Settings
you've made ............................................................ 43
DVD Playback Mode ............................................... 44
DivX (R) registration ................................................ 44
Setting the Speaker Mode.......................................44
Setting the Delay Time ............................................ 45
Setting the Test Tone............................................... 46
Setting the Audio ..................................................... 47
Setting the DRC (Dynamic Range Compression)...48
Setting the AV SYNC...............................................48
Setting the HDMIAudio ........................................... 49
Sound Field (DSP)/EQ Function ................................. 50
Dotby Pro Logic II Mode .............................................. 51
Dolby Pro Logic I! Effect.............................................. 52
Listening to Radio ........................................................ 53
Convenient Functions .................................................. 55
Operating a TV with the Remote Control ....................56
Troubleshooting ........................................................... 58
Cautions on Handling and Storing Discs.....................60
Language Code List .................................................... 61
USB Host Feature Supported Products ......................62
Specifications ............................................................... 63
4 5
Notes on Discs
DVD players and the discs are coded by region. These regional codes must match
in order for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes,)
Playable Discs
Disc Type
DVD-AUDIO
DVD-VIDEO
AUDIO-CD
Mark (Logo)
AUDIO/VIDEO
DIG[TALAUDIO
RecordedSignals
Audio + Video
Audio
Audio + VideoDivX
Do not use the followingtypes of disc!
Disc Size
5"
3 112"
5"
3 112"
5"
31/2"
Max. Playing Time
Approx. 240min (single-sided)
Approx 480 min. (double-sided
Approx. 80 min. (single-sided)
Approx 160 min. (double-sided
74 min.
20 min.
74 min.
20 min.
LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
Copy Protection
Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD
player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
This product is covered by one or more of the following U.S. patents:
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531
6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522
6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455 6,697,307 6,707,985 6,721,243
6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853 6,765,853 6,771,890 6,771,891 6,775,465
6,778,755 6,788,629 6,788,630 6,795,637 6,810,201 6,862,256 6,868,054 6,894,963 6,937,552
This product is covered by the following U.S. patents:
US4,930,158 US4,930,160
Disc Recording Format
This product does not support Secure (DRM) Media files.
CD-R Discs
Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
the disc.
Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 7O0MB/8O minute as they may not be playback.
Some CD-RW (Rewritable) media, may not be playable.
Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not
be able to fully piay the disc.
CD-R MP3 Discs
Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. I = +).
Use discs recorded with a compressionldecompression data rate greater than 128Kbps.
Only files with the "mp3" and extensions can be played.
Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the
disc can be played only up to the blank segment.
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
A maximum of 500 tracks can be played per CD.
A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
Only files with the "jpg" extensions can be played.
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be piayed.
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
disc can be played only up to the blank segment.
A maximum of 9,999 images can be stored on a single CD.
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
DVD + R/RW, CD-R/RW DivX Discs
Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user
might not play.
Software update for incompatible formats is not supported.
(Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.)
Sections with a high frame rate might not be played while playing a DivX file.
For more information about the formats authorized by DivX Networks, Inc., please visit "www.divxnetworks.net".
6 7
Description
Front Panel
9@@
I
1. Disc Tray 6. Disc Change button 11. USB Port
2. Function button 7. Power ((D/I) button 12. Tuning Up & Skip (_) button
3. Stop (11) button 8. Standby indicator Tuning Down & Skip (I,9.r_} button
4. Play/Pause ( !_, ) button 9. Headphone Jack 13.Volume Control
5. Direct Play buttons 10.AUX IN 1 Connector 14. OpenlCIose button
Display
2. LINEAR PCM indicator 9. REPEAT indicator 16, System Status Display
3. DTS indicator i0. TUNED indicator 17: RADIO FREQUENCY indicator
4, TITLE indicator tl, STEREO indicator 18. SPEAKER indicator
5 GROUP indcator !2 DOEBYPill ndicator 19. D SC(!--5) ndicator
6. CHAPTER indicator 13. DVDAUD O indicator
7. TRACK indicator 14. MPEG indicator
RearPanel
Connect a TV with c0mpoaeat video inputs to these jacks. 9. HDMI Output Jack
4, External Digital Optical Input Connector
Use this t0 €onnect external equipment capable of digital
output.
Accessories
Remote Control Video Cable FMAntenna
(AH59-01778F) (AH39-40001V) (AH42-00017A)
Audio Cable User's Manual
(AH39-00954A) (AH68-01957C)
8 9
Description (Con't)
Remote Control
POWER 0P_N_ _0SE D MMER
@oOi°®O
©©@
@@@
©@@
-@
STOP PLAY
®®@®
MENU RETURN
! i
TuNr_
_EMO_ SLOW r_sl TO_ SOU_B_T
, -_C2)C2).
SLEEF [ EZ v EW
,,CDCD, ;
...........iii
)
1. DVD RECEIVER button
2. TV button
3. TV/VIDEO, DISC SKiP button
4. POWER button
5. Number(0~9) buttons
6. REMAIN button
7. STEP button
8. Tuning Preset/CD Skip buttons
9. VOLUME button
10. MENU button
11.AUDIO button
12. I]D PL II EFFECT button
13. DD PL II MODE button
14.TUNER MEMORY,
SD(Standard Definition)/HD(High Definition) button
15. ZOOM button
16. SLEEP button
17. SLOW, MOIST button
18. EZ VIEW button
19. _ DVD button
TUNER button
USB
1_ USB, AUX button
20. OPEN/CLOSE button
21. DIMMER button
22. CANCEL button
23. REPEAT button
24. _ PLAY/PAUSE button
@ STOP button
(_)(_ SEARCH buttons
25. TUNING/CH button
26. MUTE button
27. RETURN button
28. Cursor/ENTER button
29. SUBTITLE button
30. EXIT button
31. DSP/EQ button
32. INFO button
33. SOUND EDIT button
34. DIGEST button
35. TEST TONE button
36. SLIDE MODE button
37. LOGO button
Insert Remote Batteries
1 Remove the batterycover in the direction of the arrow.
Insert two 1.5VAAA batteries, paying attention to the correct polarities
(+ and -).
3 Replace the battery cover.
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and (-) to (-).
Use the correct type of batteriesBatteries that look similar may differ in voltage.
Always replace both batteries at the same time.
Do not expose the batteries to heat or a flame.
OperationRangeof the RemoteControl
The remote control can be used up to approximateiy 23 feet (7 meters) in a straight line. It can also be
operated at a horizontal angle of up to 30° from the remote control sensor.
]u_
10 11
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
,,,
2.5 to 3 times the size of the TV screen
/
Position of the Home Theater
Place it on a stan& cabinet shelf_or under the TV stand.
Front Speakers 00
Place these speakers in front of your listening position,
facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be atthe
same height as your ear.
Align the front face of the front speakers with the front face
of the center speaker or place them slightly in front of the
center speakers.
Center Speaker 0
It is best to instalt itat the same height as the front
speakers.
You can also install it directly over or under the TV.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times
the distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8 feet)
For 55" TVs 3.5~4m (11~13 feet)
Rear Speakers 00
Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they
face each other.
Place them about 60 to 90cm (2 to 3feet) above your ear,
facing slightly downward.
* Unlike the front and center speakers, the rear speakers
are used to handle mainly sound effects and sound wili
not come from them all the time.
Subwoofer _)
The position of the subwoofer is not so critical.
Place it anywhere you like.
Rear Speaker(R)
Center Speaker
Rear Speaker (L)
\
Front Speaker (R)
Subwoofer
Front Speaker (L)
\
Red
Black
1 Press and hold the terminal tab.
2 Insert the speaker cord.
3 Release your finger.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/-) is correct.
Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated
by the speaker. If this occurs, place the speaker away from your TV set.
12 13
ConnectingtheOptionalWirelessReceivingAmplifier
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
Front Speaker (R) Front Speaker (L)
Center Speaker
Subwoofer
Rear Speaker (L) Rear Speaker(R)
WIRELESS RECEIVER MODULE
!i!ii¸!¸¸¸!:/))i )i )i )i )i )_i ¸¸¸¸¸¸¸¸)¸¸¸¸)!i¸¸¸¸¸¸¸¸¸¸i!!;i i i¸ iii!iii)i!i(ii¸ii)??_)!ii i!i(i¸)!;i; iiiiii))i!;!; !;i;;
Slanted side face left
TX card
1 Connect the Front, Center and Subwoofer speakers to the main unit,
referring to page 13.
2 With the main unit turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the back of the main unit.
Holdthe TX card so that the slanted side faces leftward and insert the
card into the port.
The TX card enables communication between the main unit and the wireless receiver.
3 Connect the left and right rear speakers to the wireless receiving
module.
4 Plug the power cord of the wireless receiving module in the wall outlet
and switch the power switch 'ON'.
Do not insert a card other than the TX card dedicated for the product.
The product might be damaged or the card may not be removed easily.
Do not insert the TX card upside down or in the reverse direction.
Insert the TX card when the main unit is turned off.Inserting the card
when it is turned on may cause a problem.
if the TX Card is inserted in the main unit, the rear speakers don't
output sounds.
Resettingthe Wireless ReceivingModule
Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does not
light up and the "REAR CHK" message blinks on the main unit's displaj4
Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode.
1 With the main unit turned off, press and hold the remote
control's REMAIN button for 5 seconds.
The STANDBY LED on the front panel of the wireless receiver module
blinks.
2 With the wireless receiver module turned on, use a ball point
pen or a toothpick to press the RE8ET button on the back of
the unit.
The STANDBY LED on the front panel of the wireless receiver module
blinks 2 Times.
3 Turn on the main unit.
The LINK LED of the wireless receiver module is lit and the Reset is
completed.
If Power Standby mode continues, repeat Steps 1to 3 above.
When the wireless receiving moduIe setting is complete, no audio signal is output from the Rear Speaker Output
Connector on the back of the main unit.
The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and
moisture.
For optimal listening performance, make sure that the area around the wireless receiver module location is clear of
any obstructions.
Sound will be heard from the wireIess rear speakers in DVD 5.1-CH or Dolby Pro Logic I! mode on(y.
In 2-CH mode, no sound will be heard from the wire(ess rear speakers.
P(ace the wireless receiver modu(e at the rear of the listening position. If the wire(ess receiver module is too close
to the main unit, some sound interruption may be heard due to interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that
uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.
The transmission distance of a radio wave is about 33 feet, but may vary depending on your operating
environment. If a stee(-concrete wa(I or metallic wall is between the main unit and the wireless receiver modu(e,
the system may not operate at all, because the radio wave cannot penetrate metal.
14 15
16
Connecting the Video Out to your TV
Choose one of the three methods for connecting to a T_Z
(supplied)
COMPONENTo_
TV
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the main unit to the HDMI IN jack
on your TV.
If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) Connectors on the back of the main unit to the Component Video Input
Connectors on your TV.
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on your TV.
This productoperates in Progressive scan mode(480i Only ) for Component Output.
After makingthe video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your Home theater.
See yourTV owner's manual for more information on how to select the TV's Video Input source.
If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate
the Home Theater usingthe TV's remote control. (This is only available with SAMSUNGTVs
that support Anynet+(HDMI-CEC).)
Please check the _-Tynet + logo (If your TV has an (_ynet+ logo, then it supports Anynet+ function.)
HDMI Function
Resolution Selection
This function allows the user to select the screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Definition/High
Definition)button on the remote control.
Resolutionsavailableforthe HDMtoutputare480p,720Pand 1080i.
SD(StandardDefinition)resolutionis480pandHD(HighDefinition)resolutionis720p/1080i.
i i
What is HDMI(High Definition
Multimedia Interface)?
TNs device transmits a DVD
video signal digitally without
the process of converting to
analog. Youwill get sharper
digital pictures when using
an HDMI connection.
Example: If the TV supports resolution upto 480p:
Press the SD/HD button.
A480pvideosignalis outputthroughthe HDMIoutput.
IftheTVdoesnotsupporttheconfiguredresolution,youwillnotbe abletoseethepictureproperly.
The default setting of the HDMI output is 480p.
When a HDMI TV is connected, composite and component video signals are not
output.
See your TV owner's manual for more information on how to select the TV's Video
Input source.
Using Anynet+(HDMl-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can belsed I
by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that suppol Anynet+.) I
1 Connect the main unit of the Home Theater to a Samsung TV with
an HDMI cable. (See page 16)
2 Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
You can operate the Home Theater by using the TV remote control.
lAva,ableTVbuttons: ", and'q, buttons, button)
Set the Anynet+(HDMI-CEC) to <On> on your TV.
<Receiver: On>: Youcanlistentoaudiothroughthe TV.
<Receiver: Off> :Youcan listento audiothroughtheHomeTheater.
With Anynet+ I
You can operate this unit, I
power on your TV, or watch
a movie by pressing the Play I
button on your Samsung TV's
remote centre. J
Select <THEATER to connector> and set the option of each items below.
<THEATER Menu> : You can access the Home Theater menu.
<THEATER Operation> : The Home Theater disc playback information will bedisplayed.
<Receiver : On> : You can listen to audio through the Home Theater.
<Receiver : Off> :You can listen to audio through the TV.
The Theater function is available only when you listen to the audio through
the Home Theater with the digital optical cable connected.
17
ConnectingAudiofrom ExternalComponents
AUX1 : Front Panel (iPod only)
Audio Cable I
AUX1 : Front Panel
AUX1 Connecting an External Analog Component/iPod MP3
You can listen to the audio from an External Analog Component/iPod MP3 player through the main unit.
1 ConnectAUX IN 1 (Audio) on the Home Theater to the Audio Out ofthe external analog component/
iPod MP3.
2 Press the AUX button on the remote control to select <AUXI> input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows • DVD/CD -_ DIGITAL IN -* AUX 1 -_ AUX 2 -_ USB -_ FM,
When the unit is powered on and you connect an iPod MP3 player, the unit wilI charge your iPod's battery.
AUX2 : Rear Panel
I Audio Cable
(not supplied)
Ifthe external analog
component has only one
Audio Out, connect either
left or right.
AUDIO OUT
OPTICAL : Rear Panel
_, ,_,_,
/A
Y
z
4/,°:',:°:t,':'o:)
AUX2 Connecting an External Analog Component
Analog signal components such as a VCR.
1 ConnectAUX IN 2(Audio) on the HomeTheater to theAudio Out of the external analog component.
Besure to match connector colors.
2 Press the AUX button on the remote control to select <AUX2> input.
You can also use the FUNCTION button on the main unit.
The mode switches as foltows " DVD/CD -* DIGITAL IN -* AUX 1 -* AUX 2 -* USB -* FM.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to
this product.
OPTICAL Connecting an External Digital Component
Digital signal components such as a Set-Top Box.
1 Connect the Digital Input(OPTICAL) on the Home Theater to the Digital Output ofthe external digital
component.
2 Press the AUX button on the remote control to select <DIGITAL IN>.
You can also use the FUNCTION button on the main unit.
The mode switches as follows • DVD/CD -_ DIGITAL IN -_ AUX 1 -* AUX 2 -* USB -* FM.
18 19
Connecting the FMAntenna
RADIO ANT
FM Antenna (supplied)
FM 75 Q
1 Connect the FM antenna supplied to the FM 75_-2COAXIALJack.
2 Slowly move the antenna wire around until you find a locationwhere reception is good, then fasten it
to a wall or other rigid surface.
This unit does not receive AM broadcasts.
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is weIFventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. (tf the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.)
Before Reading the User's Manual
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon Term Definition
This involves a function available with DVD or
DVD DVD-R/DVD-RW discs that have been recorded and
finalized in Video Mode.
This involves a function available with a data CD
CD (CD-R or CD-RW).
MP3 This involves a function available with CD-R/-RW discs.
JPEG This involves a function available with CD-R/-RW discs.
This involves a function available with MPEG4 discs.
DivX (DVD_ R/RW CD-R or CD-RW)
This involves a case where a function does not
CAUTION operate or settings may be cancelled.
This involves tips or instructions on the page that help
NOTE each function operate.
In this manual, the instructions marked with "DVD ( _, )" are applicable to DVD-VIDEO, DVD-AUDIO
and DVD-R/-RW discs that have been recorded in Video Mode and then finalized.
Where a particular DVD type is mentioned, it is indicated separately.
If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
20 21
Before UsingYour Home Theater
ToOperateyourSamsungTVandtheHomeTheaterwiththeHT-XSO'sRemoteControl
The DVD Home Theater's remote can be used to control Samsung TVs.
i i
POWER
ii_ii!ii,iii!iiiil)i_iiiiiii_,_
1 Plug the main unit's power cord into the AC power supply.
2 Press the TV button to set the remote to TV mode.
3 Press the POWER button to turn on your Samsung TV
with this remote.
4 Press the TV/VlDEO button to select VIDEO mode onyour TV.
VIDEO
6 Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD/CD playback.
Disc Playback
1 Press the OPEN/CLOSE button to open the disc tray.
2 Load a disc.
Placeadiscgentlyintothetraywiththedisc'slabelfacingup.
3 Press the DISC 8KIP button.
Rotatethe carousettrayso youcanloadthe third,fourth,andfifthdiscs•
4 Close the compartment by pressing the OPEN/CLOSE button again.
Playbackstartsautomatically.
To stop playback, press the 8TOP button during playback.
Ifpressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
Ifthe PLAY/PAUSE ( I_11) button or ENTER button is pressed, playback resumesfrom the stop position.
(This function works only with DVDs.)
Ifpressed twice, <STOP> is displayed, and if the PLAY/PAUSE ( I_11 ) button is pressed, ptayback starts from
the beginning.
To temporarily pause playback, press the PLAY/PAUSE ( _ll ) button during playback.
To resume playback, press the PLAY/PAUSE( I_11) button again.
Avoid getting fingerprints on the writing surface of a disc, it may cause the disc to not read properly,
Depending on the content of the disc, the initial screen may appear different.
Any piracy could not be runnable in the player. Otherwise, it violates the CSS (Content Scrambling System : a copy
protection system) recommendations.
Selecting a Disc in the Disc changer
ii
:_i_iiiiiiii_i!i!iii!i__!_ii!ili_!!i,_!!ili_iii__!iii!ii!iiiiiii!!ii_i
To select a specific disc, press the corresponding the DIRECT PLAY (1, 2, 3, 4, 5)
buttons on the front panel or the DISC8KIP button on the remote control, until
the required disc indicator flashes.
Ifthediscselectedisnottoaded, thenextdiscisplayed automatically•
,i 4 ill i_ i 0
22 23
MP3/WMA-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
i i.............................................................
0PE _£L0S_
® i;
i
i i
i iil
i iil
i
!;iiii
SORTNG _ _ _ _ _SfC_RfNAVI
1 Place the MP3/WMA disc on the disc tray.
The MP3/WMA menu screen will appear and ptayback will start.
The appearance of the menu depends on the MP3/WMA disc.
WMA-DRM files cannot be played.
2 In Stop mode, use the Cursor •, •, 4, button to select the album, and
then press the ENTER button.
Use the Cursor •, button to select the track.
3 Tochange the album, use the Cursor •, •, •, button to select another
album in Stop mode, and then press the ENTER button.
To select another album and track, repeat Steps 2 and 3 above•
4 Press the 8TOP (,,) button to stop playback.
Depending on the recording mode, some MP3/WMA-CDs may not play.
Table of contents of a MP3-CD varies depending on the MP3/WMA track format
recorded on the disc.
_" To play a file icon in the screen,
Press the Cursor •, •, 4, button when it is in Stop mode and select a desired icon from the top part of the menu.
Music File Icon : To ptay music files only, select the _ Icon.
Image FiIe Icon : To view image files only, select the _ Icon.
Movie FiIe Icon : To view movie files only, select the _ Icon.
All File Icon : To view movie flies oniy, select the _ Icon.
JPEG File Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back
with this Home Theater.
Slide Mode
i .......... i ii
ii ¸ii¸¸¸¸¸:¸£¸!!i!i!ii _ i!!!!!!il
ii
Digest Function
1 Place the JPEG disc on the disc tray.
Playbackstartsautomatically.Eachimageis displayedfor5 secondsandthenthe next
imageisdisplayed.
2 Press the SLIDE MODE button.
Eachtimethebuttonispressed,the imagemakesthetransitionasfollows:
Press the I<1<1IH_I button to skip to the next slide.
Each time the button is pressed, the slide moves backward or forward.
You can wew 9 JPEG images on the TV screen at once.
1 Press the DIGEST button during playback.
JPEGfileswiIIbe shownin9windows.
2 Press the Cursor A, •, •, button to select the desired image and
then press the ENTER button.
Theselectedimageisplayedfor 5secondsbeforemovingtothe nextimage.
_" Toview the previous or next 9 images, pressthe _ _ button.
Rotate/Flip Function
Press the Cursor A, •, •, button during playback.
Original Image
button:FlipVertically ,
÷¢@@®®÷¢
button:Rotate90°
Counterclockwise
I_ button: Rotate 90°
Clockwise
button: Flip Horizontally
The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
Ifa JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is
automatically converted to 480p mode.
24 25
26
DivX Playback
The functions on this page apply to DivX disc playback.
I Skip Forward/Back
During playback, press the I_1<, _ button.
Goes to the next file whenever you press the I_ button, if there are over 2 flies inthe disc.
Goes to the previous file whenever you press the I_ button, if there are over 2 files inthe disc.
J Fast Playback
To play back the disc at a faster speed, press the _ or _ button during
playback.
Eachtimeyoupresseitherbutton,the playbackspeedwill changeas follows:
2x-_ 4x -_ 8x-_ 32x-_ Normal.
Minute Skip function
During playback, press the Cursor _i, button.
Playback skips 5 minutes fop_vardwhenever you press the Cursor button.
Playback skips 5 minutes back whenever you press the Cursor< button.
!
1
2 Press the Cursor A •, ,<
Zoom Function
Press the ZOOM button.
Each time you press the button, your selection will toggte between <ZOOM X2> and
<ZOOM OFF>.
button to move to the area you want to enlarge.
ADivX file can be zoomed only in ZOOM X2 mode.
DivX files have .Avifile extensions, however, not all .Avi files are DivX and may not be
playable in this unit.
I Audio Display
Press the AUDIO button.
Ifthere are multiple audio tracks on a disc, you can toggte between them.
_fn
Each time you press the button, your seIection will toggte between <AUDIO (l/N, 2/N ...)> and _.
_ is displayed when there is one supported language in the disc.
Subtitle Display
Press theSUBTITLE button.
Each time you press the button, your selection will toggle between <SUBTITLE (l/N, 2/N ...)>
and <SUBTITLE OFF>.
If the disc has only one subtitle file, it will be played automatically.
See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX
discs.
I If the disc has more than one subtitle file
If the disc has morethan one subtitle file, the default subtitle may not match the
movie and you will have to select your subtitle language as follows:
1 In Stop mode, press the Cursor A, button, select the desired subtitle ( _ )
from the TV screen, and then press the ENTER button.
2 When you select the desired DivX file from the TV screen, the movie will be
played normally.
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and
video data over the Intemet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quafity
video and audio.
1. Supported Formats
This product only supports the following media formats. If both video and audio formats are not supported, the user may
experience problems such as broken images or no sound.
Supported Video Formats
t Format AVI WMV
Supported Versions DivX3.11~DivX5.1, XviD Vl/V2/V3/V7
SupportedAudio Formats
Format MP3 WMA
Bit Rate 80~384kbps 56~128kbps
SamplingFrequency 44.1khz
AC3
128~384kbps
44.1/48khz
DT8
1.5Mbps
44.1khz
,
DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.
Aspect Ratio: Although default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels (!6:9).
TV screen resolutions higher than 800 will not be supported.
When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on
the screen during playback.
Caption Function
You must have some experience with video extraction and editing in order to use this feature properly.
To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi)
within the same folder.
Example. Root Samsung_007CDl.avi
Samsung_007CD1 .smi
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for
the file name.
27
Using the Playback Function
Displaying Disc Information _ _
You can view disc playback information on the TV screen.
Press the INFO button.
Eachtimethebuttonispressed,thedisplaychangesasfollows:
0
The information
O Display disappears
from the screen
s^Ms
everyone's inv_ted_
The information
Display disappears
from the screen
The information
DisplaYdisaPpears
from the screen
Depending on the disc, the disc information display may appear different.
Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC•
_ appears on the TV screen!
If this symbol appears on the TV screen when pressing a button, that operation isnot
possibte with the disc currently being ptayed.
D\,,/_ DVDdisplay
DVD-AUDIOdisplay
CD display
TITLEdisplay
_8,V CHAPTERdisplay
TRACK(FILE)display
GROUPdisplay
ELAPSEDTIMEdisplay
_ REPEATPLAYBACKdisplay
i_ AUDIOLANGUAGEdisplay
_ SUBTITLEdisplay
_'_ LR STEREO(L/R)display
_G_ DOLBYDIGITALdisplay
ANGLEdisplay
Checking the Remaining Time
..............
i (ii_i:iiii:_i?ii'i'i'i'i:_ij_i_ii,_i:i_,.......
Press the REMAIN button.
Forcheckingthetotalandremainingtimeof atitleor chapterbeingplayed.
Each time the Remain button is pressed
Fast Playback
!! ...... _•_/ L!iiii:!:¸_
® ®
Press the ,_r_l, _ button.
Eachtimethe buttonispressedduringplayback,theplaybackspeedchangesasfollows:
During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
Slow Playback
&_ow
Press the 8LOW button.
Eachtimethe buttonispressedduringplayback,theplaybackspeedchangesasfollows:
No sound is heard during slow playback.
Reverse slow playback does not work with DivX.
28 29
Using the Playback Function (Con't)
Skipping Scenes/Songs
_i!::_i!i!::,i_:ii;i:i,ii,:_
.il.¸¸ _ i¸¸ ...............;
,' ,
Press the I<<, _ button.
Eachtimethebuttonis pressedduringplayback,thepreviousornextchapter,trackor
directory(file)willbe played.
Youcannotskipchaptersconsecutively.
I<<
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
l?i'_.;_,i:i_ l 0 _ .i_:._._,:_
..... !if!?
Press the REPEAT button.
Eachtimethe buttonispressedduringplayback,therepeatplaybackmode
changesasfollows:
CHAPTER :Repeatedly plays the selected chapter.
TITLE : Repeatedly plays the selected title.
GROUP :Repeatedly plays the selected group.
RANDOM :Plays tracks in random order.
(Atrack thathasalreadybeenplayedmay beplayedagain.)
TRACK : Repeatedly plays the selected track.
DIR :Repeatedly plays atl tracks in the selected folder.
DISC : Repeatedly plays the entire disc.
OFF :Cancels Repeat Playback.
ToSelecta RepeatPlaybackModeinthe Disc Information Screen
1 Press the INFO button twice.
2 Press the Cursor button to move to REPEAT PLAYBACK (_#) display.
3 Press the Cursor button to select the desired Repeat Playback mode.
Toselectanotheralbumandtrack,repeatSteps2and3 above•
4 Press the ENTER button.
_)TRACK
d;_oBc
I
For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information
display screen.
30 31
A-B Repeat Playback
You can repeatedly play back a designated section of a DVD.
1 Press the INFO button twice.
2 Press the Cursor button to move to the REPEAT PLAYBACK ((_)) display.
3 Press the Cursor A button to select <A-> and then press the ENTER button
at the beginning of the desired segment.
WhentheENTERbuttonispressed,theselectedpositionwillbe storedinmemory•
4 Press the ENTER button at the end of the desired segment.
Thespecifiedsegmentwill beplayedrepeatedly.
A TO B REPEAT ON
_" Toreturn to normal playback, press the Cursor A, button to select
(_# OFF.
Angle Function
This function allows you to view the same scene in different angles.
1 Press the INFO button.
2 Press the Cursor button to move to ANGLE ( _N ) display.
3 Press the Cursor A button or numeric buttons to select the desired angle.
Eachtimethe buttonis pressed,theangtechangesasfollows:
The Angle function works only with discs on which multiple angles have been recorded.
The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
Step Function
Press the STEP button.
The picture moves forward one frame each time the button ispressed during playback.
Zoom (ScreenEnlarge)Function
This function allows you to enlarge a particular area of the displayed image.
1 Press the ZOOM button.
2 Press the Cursor A, •, •, button to move to the area you want to enlarge.
3 Press the ENTER button.
Each time the button is pressed, the zoom levet changes as follows:
-4' -4* -4*
No sound is heard during step motion playback. When a DivX disc is being played, the screen isenlarged up to twice the normal size.
32 33
Using the Playback Function (Con't)
EZ VIEW Function
i _ _ii::iiiiliii iiiiii
: EZ VIEW
Press the EZ VIEW button.
Eachtimethe buttonispressed,thezoomfunctionwill switchbetweenOnandOff.
Whenamovieisplayedin Widescreenformat,btackbarsatthe topandbottomofthe TV
screencanberemovedbypressingthe EZViEWbutton•
Audio Language Selection Function
',!i!:!!_.... _ii!ii!!!!;_
iiii,iii:i i! ii i !iii!!iiii'i' i!i i!!i! i !:i!ili:ii!iii
..... ii _iil
1 Press the INFO button twice.
2 Press the Cursor A, button or numeric buttons to select the desired audio
language.
Dependingonthe numberof languagesonaDVDdisc,adifferentaudiolanguage(ENGLISH,
SPANISH,FRENCH,etc.)isselectedeachtimethebuttonis pressed.
This function will not work if the DVD is recorded with multi-camera angle format.
Black bars may not disappear because some DVD discs have a built-in horizontal to
vertical ratio.
This feature is not supported for DivX discs.
During the EZ View operation, the scenes on the screen are not full to the brim of the TV
screen, but some of their left and right sides may be cut slightly.
Bonus Group
Some DVD-Audio discs have an extra 'oonus' group that requires a 4-digit key number to access. See the disc packaging
for details and the-key number.
When you play a DVD-Audio disc that has a bonus group, the key number
input screen appears automatically.
_• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
Navigating Pages
During playback, press the v,A button on the remote control.
YoucanselectthedesiredimagefromaDVD-Audiodisccontainingstillimages•
Withsomediscs,youmaynotbeabletoselectimages.
Subtitle Language Selection Function
1 Press the INFO button twice.
2 Press the Cursor button to move to SUBTITLE (_]) display.
3 Press the Cursor button or numeric buttons to select the desired subtitle.
Tooperate this function, you can also press theAUDIO or SUBTITLE buttons on
the remote control.
Depending on the disc, the Subtitle andAudio Language functions may not be available.
34 35
Using the Playback Function (Con't)
Moving Directly to a Scene/Song _
ii!i i'ii
1 Press the INFO button.
2 Press the Cursor ,&, button or numeric buttons to select the
desired title/track ( _ ) and then press the ENTER button.
3 Press the Cursor<, button to move to the Chapter ( _AVJ'A) display.
4 Press the Cursor ,&, button or numeric buttons to select the
desired chapter and then press the ENTER button.
6 Press the Cursor <, button to move to time ( O ) display.
6 Press the numeric buttons to select the desired time and then press
the ENTER button.
Using the Disc Menu
You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc.
MENU ;
E×iT
_!::,!_!_,¸ i:_"_i_i!!,!!i:,@
ii!_ii,i!ii_iiiii,ii:ii_,'_:_:,_ii_'___ _i!i!i,i_?_iili!i
1 In Stop mode, press the MENU button.
2 Press the Cursor •, button to move to the <DISC MENU> and then
press the ENTER button.
WhenyouselectDiscMenuanditisnotsupportedbythedisc,the"Thismenuisnot
supported"messageappearsonthescreen.
3 Press the Cursor •, •, <, button to select the desired item.
4 Press the ENTER button.
_- Press the EXIT button to exit the setup screen.
The disc menu display may be different depending on the disc•
Press the numeric buttons.
The seIected file wilI be played•
When playing an MP3 or JPEG disc, you cannot use the Cursor •, button to move to a folder•
To move a folder, press the STOP (11) and then press the Cursor • button.
You can press the _14 _ button on the remote control to move directly to the desired
title, chapter, or track•
Depending on the disc, you may not be able to move to the selected title or time.
Using the Title Menu
For D VDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature
may vary.
1 In Stop mode, press the MENU button.
2 Press the Cursor •, button to move to the <Title Menu>.
3 Press the ENTER button.
Thetitlemenuappears.
Press the EXIT button to exit the setup screen.
The Title menu display may be different depending onthe disc.
36 37
PlayingMediaFilesusingthe USBHOSTFeature
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video with 5.1 channel home theater sound by connecting the storage device to the USB port of the home theater.
Connect the USB device to the USB port on the front of the unit.
2
3
Press the FUNCTION button on the main unit or the U8B button on the
remote control to select the USB mode.
<USB>appearsonthedisplayscreenandthendisappears.
TheUSBMENUscreenappearsonthe TVscreenandthesavedfile is played.
To stop playback, press the 8TOP (I) button.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before
disconnecting the USB cable•
(1) Press the STOP (I) button twice in a row.
The display will show REMOVE USB.
(2) Remove the USB cable.
Skip Forward/Back
@ ...................@
_ii,,i_ _ij _
: iiii iiii < i iliiii i i iii:i iiiiiiiiii:,
During playback, press the _ I_-I button.
When there is more than one file and you press the I_,-I button, the next file is selected•
When there is more than one fite and you press the i_1_1button, the previous file is selected•
Fast Playback
0 iiii
To play back the disc at a faster speed, press the _1 _ button during playback.
Eachtimeyoupresseitherbutton,the playbackspeedwill changeas follows:
2x-_ 4x -_ 8x-_ 32x-_ Normal.
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc in
Windows (2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• camerasthatoperateasaremovablediscin Windows(2000orlater)withoutadditionaldriverinstallation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USBI.1.
• Youmayexperiencea differencein playbackqualitywhenyouconnecta USB1.1device•
• ForaUSBHDD,makesuretoconnectanauxiliarypowercordtothe USBHDDfor properoperation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Dependingonthemanufacturer,the USBcardreadermaynotbesupported.
• Ifyouinstallmultiplememorydevicesintoa multicardreader,youmayexperienceproblems•
6. If yOU use a USB extension cable, the USB device might not be recognized.
Supported Formats
JPG
MP3
WMA
WMV
DivX
JPG .JPEG
MP3
.WMA
.WMV
.AVI,.ASF
80~384kbps
56~128kbps
4Mbps
4Mbps
- 640x480 -
- - 44.1kHz
V8 - 44.1kHz
V1,V2,V3,V7 720x480 44.1KHz~48KHz
DivX3.11~DivX5.1,XviD 800x600 44.1KHz~48KHz
CBI (Control/Bulk/Interrupt) is not supported.
Digital Cameras that use PTP protocol or require additional program installation when connected
to a PC are not supported.
A device using NTFSfile system is not supported. (Only FAT 16/32 (FileAllocation Table 16132)file
system is supported.)
Some MP3 players,when connected to this product,may notoperate depending on the sector size
of their file system.
The USB HOST function is not supported if a productthat transfers media files by its manufacturer-
specific program is connected.
Does not operate with Janus enabled MTP(MediaTransfer Protocol) devices.
The USB host function of this product does not support all USB devices. For information on the
supported devices, see page 62.
38 39
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Samsung AH68-01957C User manual

Category
DVD players
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI