MBM DESTROYIT 5009 User manual

MBM
Brand
MBM
Model
DESTROYIT 5009
Category
Paper shredders
Type
User manual

This manual is also suitable for

MBM DESTROYIT 5009: With this device, you can shred paper, flat or crumpled, as well as cardboard boxes including staples. Benefit from the user-friendliness and time-saving applications of this shredder! The machine is constructed for "one man operation" only. All components which could endanger the operator are covered by a guard. The device operates only when the door and grid are closed. Please read these operating instructions before putting the machine into operation and observe the safety precautions.

MBM DESTROYIT 5009: With this device, you can shred paper, flat or crumpled, as well as cardboard boxes including staples. Benefit from the user-friendliness and time-saving applications of this shredder! The machine is constructed for "one man operation" only. All components which could endanger the operator are covered by a guard. The device operates only when the door and grid are closed. Please read these operating instructions before putting the machine into operation and observe the safety precautions.

- 1 -
Dieser Text darf nicht sein!!
Dieser Text darf nicht sein!! UL-ID in Konf nur bei GB
GB Operating Instructions
Document Shredders
Modular conveyor belt system
IDEAL 5009-2 CC
IDEAL 5009-3 CC
IDEAL 4605 CC
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
- 6 -
IDEAL 5009-2; IDEAL 5009-3
A
The machine is constructed to shred paper,
flat or crumpled, as well as cardboard boxes
including staples.
Do not shred any material which may loop or
splinter.
Material not caught by the shredding
mechanism must be pushed with the
pusher (A).
GB •Sicherheitshinweise
•
Safety precautions
•
- 7 -
Quick stop © Press emergency stop!
This machine is constructed for "one man
operation" only!
All components which could endanger the
operator are covered by a guard.
GB •Sicherheitshinweise
•
Safety precautions
•
- 8 -
IDEAL 5009-2; IDEAL 5009-3
B
A
A
C
Machine operates only when the door . . .
. . .and grid are closed.
Do not operate the machine without the
following safety devices:
•
Panels (A) tightly screwed.
• Grid (B) and door (C) which are secured by
switches.
GB •Sicherheitshinweise
•
Safety precautions
•
- 9 -
Do not use steps or anything similar.
Remove the plug before cleaning the
machine! Do not perform any repairs on the
document shredder!
(See page 28).
GB •Sicherheitshinweise
•
Safety precautions
•
- 10 -
IDEAL 5009-2; IDEAL 5009-3
Protect mains cable against heat, oil and
sharp edges!
When not in use for a longer time switch off
the machine.
GB •Sicherheitshinweise
•
Safety precautions
•
- 11 -
B
A
~1200 kg
(2630 lbs)
>110 cm
The transport safety device (A) and (B) must
be mounted when the machine is transported
lengthwise. The machine must be transported
from the rear.
Make sure the pallet-jack is centred under the
machine.
Do not lift up the machine from the
operating side.
Do not lift the machine more than necessary
© risk of tipping.
Aufstellung
•
Installation
•
- 12 -
IDEAL 5009-2; IDEAL 5009-3
780 mm
660 mm
32 “
27 “
•
Do not cover the ventilation slits.
•
Consider the floor loading.
Weight approx. 1200 kg.
Aufstellung
•
Installation
•
- 13 -
A
3
A
•
Open the door.
•
Remove the transport safety device (A) and
keep for later use.
•
Mount the supporting screws (A).
•
Screw down the supporting screws until the
rear castors are balanced.
Waste cart
•
Put the plastic bag into the waste cart as
described under "replace bag".
(See page 22)
•
Push the cart into the machine, with the
open side facing you, until it touches the
buffer.
•
Close the door.
Aufstellung
•
Installation
•
- 14 -
IDEAL 5009-2; IDEAL 5009-3
B
A
Conveyor belt (Accessory)
When using a conveyor belt the following
modifications must be made on the machine:
Remove the back transport safety device (B).
Remove the springs from the ball-ends (A) on
both sides.
Aufstellung
•
Installation
•
- 15 -
Dismount the tie-bar.
Push the pusher to the back.
Push back the conveyor belt into the machine.
Aufstellung
•
Installation
•
- 16 -
IDEAL 5009-2; IDEAL 5009-3
B
A
If the machine is to be operated with a waste
cart the rear transport safety device (A) and
tie-bar (B) must be re-assembled. To
assemble follow the same instructions in the
reverse order.
Turn both handles to lock.
Plug into the wall socket.
Aufstellung
•
Installation
•
- 17 -
o.k.
Start
Start
o.k.
Check the direction of the conveyor belt.
Start the machine.
Wrong rotating direction © Changes must be
done by an electrician.
Aufstellung
•
Installation
•
- 18 -
IDEAL 5009-2; IDEAL 5009-3
A
E
D
C
B
A
Starting the machine
Grid (A) must be closed.
•
Emergency-stop (A) pulled out.
•
Main switch (B) to position "I".
•
Turn key switch © standby (C) illuminates.
•
Press the black button (E)
© conveyor belt is running.
Operating elements
A
- Start
B
- Stop, light for "door open" and "grid
open"
C
- Reverse switch, lamp showing "bag full"
D
- Key switch
E
- Standby
F
- Mains switch
G
- Temperature indicator / yellow pilot light
H
- Emergency-stop
Bedienung
•
Operation
•
- 19 -
A
A
B
Distribute the paper over the feeding belt.
Shred continous paper only in stacks.
The grid (A) can be lifted to remove jammed
paper.
Stopping the machine
Press the white button (A)
or emergency-stop (B).
Keep hands away from running
shredding mechanism.
Bedienung
•
Operation
•
- 20 -
IDEAL 5009-2; IDEAL 5009-3
A
B
When large amounts of paper are inserted
the machine automatically adjusts to a more
powerful, slower capacity.
If this capacity is still not powerful enough the
machine will reverse shortly and then return
to "forwards mode". This is repeated until all
material is completely destroyed.
Yellow pilot light flashes. Motor is overheated
© reduce the amount of material on the
feeding belt. The machine should work
preferably at high speed.
Stopping the machine
•
Turn main switch (A) to position "0" © the
entire machine shuts down.
•
Turn the key switch (B) and remove the key
© now the machine is secured from
unauthorised use.
Bedienung
•
Operation
•
- 21 -
Stops automatically when door is opened.
© Indicator for (O) lights.
Stops automatically when grid is opened.
© Indicator for (O) lights.
Stops automatically when plastic bag is full.
© Indicator for (R) lights.
Bedienung
•
Operation
•
- 22 -
IDEAL 5009-2; IDEAL 5009-3
Replace bag.
The "bag full" indicator lights.
•
Open the door.
•
Pull out the waste cart.
•
Pull the bag onto a pallet.
Fasten the bag. (For sealing parts and binding
wires see accessories).
Bedienung
•
Operation
•
- 23 -
1 X
•
Put a new bag into the bag frame.
•
Fasten the bag with the round belt.
•
Push the cart into the machine, with the
open side facing you, until it touches the
buffer.
•
Close the door.
•
Check the function of the door switch:
Start the machine. © If the door is opened
the machine must stop immediately.
Maintenance
If the sheet capacity reduces or after the bag
is emptied we recommend that you oil the
shredding mechanism!
Bedienung
•
Operation
•
- 24 -
IDEAL 5009-2; IDEAL 5009-3
Machine will not start
Is the machine plugged in?
The "bag full" indicator lights. © Replace bag.
Mögliche Störungen
•
Possible malfunctions
•
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

MBM DESTROYIT 5009 User manual

MBM
Brand
MBM
Model
DESTROYIT 5009
Category
Paper shredders
Type
User manual
This manual is also suitable for

MBM DESTROYIT 5009: With this device, you can shred paper, flat or crumpled, as well as cardboard boxes including staples. Benefit from the user-friendliness and time-saving applications of this shredder! The machine is constructed for "one man operation" only. All components which could endanger the operator are covered by a guard. The device operates only when the door and grid are closed. Please read these operating instructions before putting the machine into operation and observe the safety precautions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents