LG LDT7808ST/00 Owner's manual

FRANÇAISENGLISH ESPAÑOL

OWNER'S MANUAL

DISHWASHER

Read this owner's manual thoroughly before operating the appliance

and keep it handy for reference at all times.

LDT780#**

MFL69261722

Rev.02_020518

www.lg.com

2

TABLE OF CONTENTS

3 PRODUCT FEATURES

4 SAFETY INSTRUCTIONS

4 IMPORTANT SAFETY INSTRUCTIONS

9 PRODUCT OVERVIEW

9 Exterior Parts

10 Interior Parts

10 Accessories

11 INSTALLATION

11 Installation Parts and Tools

12 Installation Overview

12 Product Dimensions

12 Product Specifications

13 Preparing Cabinet Opening

14 Preparing Electrical Wiring

14 Preparing Water Supply Connection

15 Preparing Dishwasher

16 Sliding Dishwasher into Cabinet

17 Leveling the Appliance

18 Securing Dishwasher to Countertop

18 Connecting Drain Hose

20 Connecting Water Supply

20 Connecting Power

21 Final Check

22 OPERATION

22 Using the Appliance

23 Control Panel

25 Cycles

26 Options

27 Cycle/Option Guide

28 Loading the Dishwasher

29 Loading the Lower Rack

30 Loading the Silverware Basket

31 Loading the Upper Rack

34 Loading the Cutlery Rack (On Some Models)

36 Adding Cleaning Agents

38 SMART FUNCTIONS

38 SmartThinQ Application

41 Smart Diagnosis™ Function

42 MAINTENANCE

42 Cleaning the Exterior

42 Cleaning the Interior

42 Seasonal Maintenance and Storage

43 Clogged Drain Air Gap or In-Sink Disposal

44 Cleaning the Filters

45 Cleaning the Spray Arms

46 TROUBLESHOOTING

46 FAQs: Frequently Asked Questions

48 User Support Videos

49 Before Calling for Service

53 LIMITED WARRANTY

53 FOR USA

58 FOR CANADA

3PRODUCT FEATURES

ENGLISH

PRODUCT FEATURES

QuadWash™ System

Multi-Motion lower spray arm shoots water in various directions and at optimized intensities to reach every area

of the tub. This system provides more powerful and complete cleaning coverage.

Inverter Direct Drive Motor

LG's experience in motor technology results in extraordinary functionality, with advanced features like the Dual

Zone option, whisper-quiet operation, energy efciency, and durability.

The simple design and high build quality of the motor make it so reliable that it's covered for 10 years under the

warranty.

EasyRack Plus

This easy-to-use system of adjustable tines and rack height provides more exibility and versatility when

loading dishes of various shapes and sizes.

Hybrid Drying System

This efcient drying system does not use a heating element during the drying process resulting in superior

energy efciency and gentle care for dishes.

SmartThinQ™

Download the new LG smart phone app to set options, self-diagnose and troubleshoot problems with the

appliance, and other useful features. This function uses Wi-Fi.

TrueSteam™ Technology

Tiny drops of puried water coat the surfaces of every dish from the steam that lls the tub, resulting in

sparkling clean dishes.

4 SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and

follow all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others.

All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.

These words mean:

WARNING

You may be killed or seriously injured if you do not follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and

tell you what may happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, re, death, electric shock, scalding or injury

to persons when using this product, follow basic precautions, including the

following:

California Proposition 65

• This product contains chemicals known to the State of California to cause cancer and birth defects or other

reproductive harm. Wash hands after handling.

INSTALLATION

• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

• To reduce the risk of severe injury or death, follow all installation instructions.

• The appliance must be installed and electrically grounded by qualied service personnel in accordance with

local codes.

• Disconnect the power supply line, house fuse or circuit breaker before installing or servicing the appliance.

• When moving or installing the product in a different location, call qualied service personnel for installation

and service.

• Keep packing materials out of the reach of children. Packaging material can be dangerous for children.

There is a risk of suffocation.

• Moving or installation of the appliance requires two or more people.

• This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft.

5SAFETY INSTRUCTIONS

ENGLISH

• Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to

outdoor weather conditions.

• This appliance must be positioned near to an electrical power supply.

• Do not, under any circumstances, cut or remove the ground from the power supply line.

• When installing or moving the appliance, be careful not to pinch, crush, or damage the power supply line.

• Do not install the appliance in humid spaces.

• Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children might

use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has

missing or broken parts, including a damaged power supply line.

• Adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety

glasses.

• The installer must ensure that the dishwasher is completely enclosed at the time of installation.

• Use new hoses when connecting the appliance to the water supply. Do not reuse old hoses.

• After installing, check the hose connection for leaks.

• Do not damage or place heavy items on the power supply line of the appliance.

OPERATION

• Repair or immediately replace all power supply lines that have become frayed or otherwise damaged. Do

not use a power supply line that shows cracks or abrasion damage along its length or at either end.

• If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it

immediately, and contact an LG Electronics customer information center.

• Never unplug the appliance by pulling on the power supply line.

• Do not use an extension cable or adapter with this appliance.

• Do not grasp the power supply line or touch the appliance controls with wet hands.

• Do not modify or extend the power cable.

• If the product has been submerged, contact an LG Electronics customer information center for instructions

before resuming use.

• Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other

appliance.

• Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.),

gasoline, chemicals and other ammable vapors and liquids.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning the use of the appliance by a person responsible for their safety.

• If the electrical supply line is damaged, it must only be replaced by the manufacturer or its service agent or

a similar qualied person in order to avoid a hazard.

• Do not abuse, sit on, or stand on the door of the appliance.

• Read all instructions before using the appliance and save these instructions.

• Use this appliance only for its intended purpose.

6 SAFETY INSTRUCTIONS

• Do not allow children to play on, in or with the appliance. Close supervision of children is necessary when

the appliance is used near children.

• Do not tamper with controls.

• In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any other appliance. Open a

window or door to ventilate the area immediately.

• Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used

for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for

such a period, before using the appliance turn on all hot water faucets and let the water ow from each for

several minutes. This will release any accumulated hydrogen gas. As the gas is ammable, do not smoke or

use an open ame during this time.

• Fix the drain hose securely in place.

• Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the

reach of children.

• Do not let children eat detergent or dishwasher rinse agent.

• When loading items to be washed:

- Locate sharp items so that they are not likely to damage the door seal.

- Load sharp knives with the handles up to reduce the risk of cut-type injuries.

• Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not

so marked, check the manufacturer’s recommendations.

• Do not touch the HEATING ELEMENT during or immediately after use.

• Do not operate your dishwasher unless all ENCLOSURE panels are properly in place.

• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

• Do not install or store the dishwasher where it will be exposed to weather conditions.

• After cleaning the dishes, turn off the faucet. Turn on the faucet again and check the connection status of

water supply hose before cleaning.

• Do not open the door while operating. For safety reasons, the drain pump operates if the door is opened,

resulting in a longer cycle time.

• Be careful not to catch your hand when closing the door of the product.

• Do not plug the dishwasher into a damaged outlet.

• Do not install or keep the dishwasher near electrical components or exposed ames.

• Do not wash dishes exposed to gasoline, solvents or other ammable materials.

• When cleaning, do not spray water on the product directly.

• Do not press buttons with a sharp object such as an awl or pin.

• Do not use solvent-based detergent.

• Do not come into contact with the steam outlet.

• Small parts, such as rack clips and lter retaining posts can be a choke hazard to small children if removed

from the dishwasher. Keep out of reach of small children.

7SAFETY INSTRUCTIONS

ENGLISH

MAINTENANCE

• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualied

service personnel unless specically recommended in this Owner’s Manual. Use only authorized factory

parts.

• Do not disassemble or repair the appliance by yourself.

• Remove any dust or foreign matter from the power supply line.

• Disconnect this appliance from the power supply before cleaning and attempting any user maintenance.

Turning the controls to the OFF position does not disconnect this appliance from the power supply.

• Remove the door before the appliance is removed from service or discarded to avoid the danger of children

or small animals getting trapped inside.

• Unplug the appliance before cleaning to avoid the risk of electric shock.

• Before discarding the appliance, cut off the power supply line and destroy the appliance's control panel.

GROUNDING INSTRUCTIONS

• For a permanently connected dishwasher: This appliance must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead to the appliance.

• Connect the ground wire to the green ground connector in the terminal box.

TIP OVER HAZARD

• Do not use the dishwasher until completely installed.

• Do not push down on the open dishwasher door.

• Failure to follow these instructions may result in serious injury or cuts.

SAVE THESE INSTRUCTIONS

8 SAFETY INSTRUCTIONS

CAUTION

To reduce the risk of minor injury to persons, malfunction, or damage to the

product or property when using this product, follow basic precautions, including

the following:

INSTALLATION

• Install the product on a rm and level oor.

• This dishwasher must be connected to a hot water supply with a temperature range between 120 °F (49 °C)

and 149 °F (65 °C). This temperature range provides the best washing results and shortest cycle time. The

temperature should not exceed 149°F (65 °C) to prevent damage to dishes.

• Do not put the drain hose under the dishwasher during installation.

OPERATION

• Do not place objects on top of the appliance.

• Turn off the water faucets and unplug the appliance if the appliance is to be left for an extended period of

time, such as during vacations.

• Do not store or spill liquid detergents, cleaners, or bleaches (chlorine bleach, oxygen bleach) on the

appliance. Doing so may result in corrosion, discoloration or damage to the surface of the appliance.

• Do not touch draining water which may be hot.

• If the drain hose and the water supply hose are frozen in winter, defrost before using the appliance.

• Do not put hands, feet, or metal objects below or behind the appliance.

• Do not put the drain hose under the dishwasher during installation.

9PRODUCT OVERVIEW

ENGLISH

PRODUCT OVERVIEW

Exterior Parts

3

4

8

1

5

9

2

7

6

1

Control Panel

2

Door Handle

3

Front Cover

4

Lower Cover

5

Shipping Brace

6

Safety Cover

7

SignaLight™

8

Base

9

Leveling Feet

NOTE

• Do not remove the safety cover at any time.

SignaLight™ (Front Display)

The top-control models have 3 indicator LEDs centered at the top of the front cover.

• Red : Error (See the Error Codes in Troubleshooting section.)

• White (steady): Normal operation.

• White (blinking): Cycle has been paused. (After four minutes in pause mode, the machine turns off.)

• Green: Cycle nished normally.

The green light stays on for 90 seconds.

To keep the green light on until the door is opened, turn the power on, and then press and hold High Temp on

the control panel for 3 seconds until OFF or On appears in the display. The dishwasher remembers this setting

until manually changed.

10 PRODUCT OVERVIEW

Interior Parts

10

6

11

12

5

9

2

8

1

3

4

7

1

Top Wash Impeller

2

Upper Spray Arm

3

Lower Spray Arm

4

Filtration System

5

Detergent and Rinse Aid Dispenser

6

Drying Vent Cover

7

Tub Light (some models)

8

Cutlery Rack (some models)

9

Upper Rack

10

Silverware Basket

11

Lower Rack (appearance may vary)

NOTE

• The silverware basket ships installed at the back

of the bottom rack. For best performance, install it

along the right side as shown in the Interior Parts

section.

• Remove all packing materials from the exterior

and interior of the dishwasher before installing the

appliance.

2

3

• Press the tab to remove the cable tie by hand.

Cutting the tie with a knife or scissors may damage

the rack or the silverware basket.

Accessories

Included Accessories

Installation

brackets

(2ea)

Wood screws

(4ea)

Hose clamp

(1ea)

12

Steam nozzle

11INSTALLATION

ENGLISH

INSTALLATION

Installation Parts and Tools

Parts not Provided

Electrical cable Water supply tube Fittings for tube Coupler Teon™ tape

Air gap Wire nuts for

16-gauge wiring

Hose clamp ⅞" UL approved

strain relief

Electrical tape

Tools Needed

Flat-blade

screwdriver

Phillips

screwdriver

Hole saw

min. 2½" bit

Electrical drill Gloves

Safety glasses Adjustable wrench Tape measure Utility knife Level

Tubing cutter Nipper Pliers Wire stripper ¼" Square

drive wrench

12 INSTALLATION

Installation Overview

Preparing Cabinet Opening

Preparing Electrical Wiring

Preparing Water Supply Connection

Preparing the Dishwasher

Removing Lower Cover

Sliding the Dishwasher into Cabinet

Leveling the Dishwasher

Securing the Dishwasher to Countertop

Connecting the Drain Hose

Connecting Water Supply

Connecting Power

Final Check

Product Dimensions

Back view Side view

33 /16"

(846 mm)

5

23 /4" (603 mm)

3

4 /2"

(115 mm)

1

33 /8"

(854 mm)

5

2 /16" (75 mm)

15

20 /16" (512 mm)

3

24 /8" (625 mm)

5

4 /4" (120 mm)

3

9 /8"

(238 mm)

3

4 /16"

(119 mm)

5

/4"

(134 mm)

11

1

4 /2"

(115 mm)

1

26 /8 - 26 /16" (676 - 681 mm)

5 13

Water supply hose, drain hose and electric cable should be passed

through this area.

NOTE

• For easiest installation, see marked areas above for water and electrical clearances in base of dishwasher.

Product Specications

The appearance and specications listed in this manual may vary due to constant product improvements.

Electrical requirement 120 V, 60 Hz AC only, minimum 15 A circuit breaker

Water pressure 20 - 80 psi (140 - 550 kPa)

Dimensions

23

3

/4"(W) X 24

5

/8"(D) X 33

5

/8"(H)

603 mm(W) X 625 mm(D) X 854 mm(H)

Inlet water temperature 120 °F (49 °C) minimum, 149 °F (65 °C) maximum

Net weight 72 - 89 lbs. (33 - 40 kg)

13INSTALLATION

ENGLISH

Preparing Cabinet Opening

This dishwasher is designed to t a standard

dishwasher opening. An opening may be needed

on both sides to route plumbing and electrical

connections.

24" (610 mm) min.

33 /

8" (854 mm) min.

5

24" (610 mm) min.

1

Select a location as close to the sink as possible

for easy connections to water and drain lines.

2

To ensure proper drainage, install the

dishwasher no more than 12 ft. (3.65 m) from

the sink.

3

If installing the dishwasher in a corner, leave a

minimum of 2" (50 mm) between the dishwasher

and the adjacent wall.

4

To allow for proper clearance of plumbing and

electrical, use the template included with the

literature to determine the clearance on the side

of the cabinet where the cabinet meets the back

wall. Using a 2

1

/2" diameter hole saw, drill a hole

in the target area as shown on the template.

9

4

WARNING

• Don't use existing holes unless they are in the

target area. Otherwise, the water supply and

drain hose may be damaged by being crushed

or kinked.

CAUTION

• Failure to properly locate the hole for the water

and drain lines may prevent the dishwasher from

installing ush with the cabinets and could result

in kinked or damaged lines. Installation damage

is not covered by the warranty, and leaks caused

by improper installation may result in property

damage.

For ush installations only, you may remove the

cabinet brace inside the cabinet.

Cabinet brace

14 INSTALLATION

Preparing Electrical Wiring

1

Operate this appliance with the correct voltage

as shown in this manual and on the rating plate.

Connect it to a dedicated, properly grounded

branch circuit which is protected by a time delay

fuse. Connect the appliance using 3-wires,

including a ground wire.

2

If an outlet and other power connector are used,

it should be in an accessible location adjacent

to and not behind the dishwasher and within 4 ft

(1.2 m) of the dishwasher's side.

3

The wiring must be grounded properly. If in

doubt, have it checked by a qualied electrician.

Do not connect any other appliance to the same

outlet.

4

Route the wiring.

4 /2" - 6”

(115 mm - 152 mm)

1

Electrical cable

5

Make sure the electrical cable is oriented in the

right side channel.

WARNING

• For personal safety, remove house fuse or open

circuit breaker before installation.

• Do not use an extension cable or adapter with

this dishwasher.

NOTE

• If you nd any damage to the dishwasher, contact

your retailer or contractor.

• The included wire nut in 16AWG should be used.

Preparing Water Supply

Connection

Make sure the house water supply is turned off

before connecting the dishwasher water lines.

1

Connect the dishwasher to a hot water supply

with a temperature range between 120 °F (49

°C) and 149 °F (65 °C). This temperature range

provides the best washing results and shortest

cycle time. To prevent damage to dishes, the

temperature should not exceed 149 °F (65 °C).

2

When connecting the dishwasher water line,

sealing tape or compound should be used on

pipe threads to avoid leaks. Tape or compound

should not be used on compression ttings.

3

The water supply tube must be located in the left

side channel.

6 /2" - 7 /4"

(165 mm - 197 mm)

1 3

Water supply line

NOTE

• Use new hoses when connecting to the water

supply. Do not reuse old hoses.

15INSTALLATION

ENGLISH

Preparing Dishwasher

Removable Rear Plastic Shipping

Brace

The rear shipping brace can be removed if additional

clearance is needed when installing the dishwasher

under a low countertop.

NOTE

• Do not pull or lift the dishwasher using the handle;

doing so can damage the door and hinges. Open

the door and grab the body frame and the top front

opening of the tub to move or lift the dishwasher.

NOTE

• Do not push the door of the dishwasher with knees.

NOTE

• Do not push.

Removing Lower Cover

1

Remove the two screws attaching the lower

cover to the dishwasher.

2

Remove the lower cover from the base.

3

Remove the insulation pad from behind the

access panel.

CAUTION

• If you lay the dishwasher on its back, do so

carefully to avoid damaging the drain hose and

the tub.

NOTE

• Remember to replace the lower cover when the

installation is complete.

WARNING

• Do not remove safety cover. Removal can result

in re, electric shock or death.

16 INSTALLATION

Attaching Mounting Hardware

For countertops made of wood or other material

that will not be damaged by drilling, use the metal

installation brackets.

1

Insert the installation brackets into the slots in

the upper frame.

1

2

Installation bracket

2

Bend the brackets to secure them to the

dishwasher tub.

NOTE

• Installation brackets and screws can be found in the

silverware basket.

For countertops made of granite, marble, or other

materials that could be damaged by drilling, use the

wood screws to attach the dishwasher to the cabinet.

See installation instructions in Securing Dishwasher

to Countertop.

Cap

Screw

Sliding Dishwasher into

Cabinet

1

Slide the dishwasher carefully into the cabinet

opening.

2

Make sure the drain hose inside the cabinet is

not kinked or pinched.

3

Make sure the water supply line and electrical

supply are routed through the channels under

the dishwasher.

4

To avoid a kinked or pinched drain hose, be

sure to pull on the drain hose while sliding the

dishwasher into place. Do not allow any slack

behind the dishwasher.

5

After leveling the dishwasher, do not leave the

water supply line or power supply line under the

base. This is a potential cause of water leaks.

Place the water line and power supply line in the

channel.

CAUTION

• The opening in the side of the cabinet may have

sharp edges. To avoid damaging the drain hose,

smooth out or pad the edges of the opening. Pull

the drain hose through the opening slowly and

carefully.

CAUTION

• Ensure the dishwasher is level and all legs are

in rm contact with the oor before attaching the

dishwasher to the countertop or cabinet. If the

product is not leveled properly, the door may not

close or water may leak.

17INSTALLATION

ENGLISH

Leveling the Appliance

Check that dishwasher is level.

• Attach level on top front opening of tub from side to

side.

• Attach level on front side of tub.

Level

NOTE

• If you don’t have a level, try using a smartphone

level application instead.

Make sure that the gap between the door and the tub

is equal on both the left and right sides.

The water level should be checked after the initial ll

on the Normal cycle. If the water level is not near the

center of both tub lower indentations, the dishwasher

may not be correctly leveled. The dishwasher may

leak during operation if it is not correctly leveled.

Water level should be near the center

of both tub lower indentations.

Adjusting the Legs

Adjusting the Front Legs

• Use a at-blade screwdriver or a pliers to turn the

front legs and adjust the front of the tub.

• Turn the front legs clockwise to raise the front of the

tub and counter-clockwise to lower it.

• The adjustments work identically for both front legs.

Adjusting the Rear Legs

• Use a Phillips screwdriver to adjust the back legs

and the rear of the tub using the center screw at the

base of the appliance in the front.

• Turn the center screw clockwise to raise the rear of

the tub and counter-clockwise to lower it.

NOTE

• To avoid damaging the screw, do not use an electric

screwdriver.

18 INSTALLATION

Securing Dishwasher to

Countertop

For countertops made of wood or other material that

will not be damaged by drilling, use Method 1.

For countertops made of granite, marble, or other

materials that could be damaged by drilling, use

Method 2.

NOTE

• Cover the lter hole with towels to prevent screws

from falling down into the pump.

• Use a magnetic screwdriver.

Method 1

Using the provided screws, secure the dishwasher to

the countertop through the holes in the bracket.

Screw

Installation bracket

NOTE

• Installation brackets and screws can be found in

the silverware basket. See Attaching Mounting

Hardware section for more information on attaching

installation brackets to dishwasher.

Method 2

1

Remove the plastic caps from the mounting

bracket access holes.

2

Drive a wood screw through the mounting

bracket and into the cabinet frame.

3

Reinstall the plastic caps.

Cap

Screw

Connecting Drain Hose

40"

(1016 mm)

max.

12"

(305 mm)

min.

If the end of the drain hose does not t the drain

line, use a heat and detergent resistant adapter

(not supplied). These may be obtained from a local

plumbing supply store.

The two typical connections are shown. To prevent

siphoning, one of the following connections should be

used.

/8"

(16 mm)

5

/4"

(19 mm)

3

1"

(25 mm)

For air gap connections,

cut off drain hose at dotted

line

For disposal or waste tee

connections

Drain Requirements

• Follow local codes and ordinances.

• Do not exceed 12 ft. (3.65 m) distance to drain.

• Do not connect drain lines from other devices to the

dishwasher drain hose.

• If an extension drain hose is required, use

5

/8" or

7

/8"

inside diameter, 2-3 ft. length hose and a coupler for

connecting the two hose ends.

Hose clamp

Coupler

Hose clamp

NOTE

• For drain hose installation, use the screw style

clamp provided with this dishwasher in the

silverware basket.

19INSTALLATION

ENGLISH

Securing Dishwasher to

Countertop

For countertops made of wood or other material that

will not be damaged by drilling, use Method 1.

For countertops made of granite, marble, or other

materials that could be damaged by drilling, use

Method 2.

NOTE

• Cover the lter hole with towels to prevent screws

from falling down into the pump.

• Use a magnetic screwdriver.

Method 1

Using the provided screws, secure the dishwasher to

the countertop through the holes in the bracket.

Screw

Installation bracket

NOTE

• Installation brackets and screws can be found in

the silverware basket. See Attaching Mounting

Hardware section for more information on attaching

installation brackets to dishwasher.

Method 2

1

Remove the plastic caps from the mounting

bracket access holes.

2

Drive a wood screw through the mounting

bracket and into the cabinet frame.

3

Reinstall the plastic caps.

Cap

Screw

Connecting Drain Hose

40"

(1016 mm)

max.

12"

(305 mm)

min.

If the end of the drain hose does not t the drain

line, use a heat and detergent resistant adapter

(not supplied). These may be obtained from a local

plumbing supply store.

The two typical connections are shown. To prevent

siphoning, one of the following connections should be

used.

/8"

(16 mm)

5

/4"

(19 mm)

3

1"

(25 mm)

For air gap connections,

cut off drain hose at dotted

line

For disposal or waste tee

connections

Drain Requirements

• Follow local codes and ordinances.

• Do not exceed 12 ft. (3.65 m) distance to drain.

• Do not connect drain lines from other devices to the

dishwasher drain hose.

• If an extension drain hose is required, use

5

/8" or

7

/8"

inside diameter, 2-3 ft. length hose and a coupler for

connecting the two hose ends.

Hose clamp

Coupler

Hose clamp

NOTE

• For drain hose installation, use the screw style

clamp provided with this dishwasher in the

silverware basket.

NOTE

• If the knockout plug has not been removed, the

dishwasher will not be able to drain properly.

Connecting to Disposal with No Air

Gap

1

Remove the knockout plug with a hammer and

screwdriver.

Knockout plug

2

Attach the drain hose to disposal with the hose

clamp provided. Move into position and tighten

the hose clamp.

Connecting Waste Tee with No Air

Gap

1

Remove the knockout plug with a hammer and

screwdriver.

2

Attach the drain hose to waste tee with the hose

clamp provided. Move into position and tighten

the hose clamp.

Connecting to Disposal or Waste Tee

with Air Gap

1

Remove the knockout plug with a hammer and

screwdriver.

2

Connect end of the drain hose to the air gap with

hose clamp provided. This avoids water being

siphoned from the tub.

Air gap

Rubber hose

connector

Drain hose

3

Attach the rubber connector to disposal or waste

tee with the hose clamp provided. Move into

position and tighten the hose clamp.

Connecting without Air Gap

The height of the drain hose end must be at least 12"

(305 mm) and within 40" (1016 mm) from the base of

the appliance to avoid water being siphoned from the

tub.

12"

(305 mm)

min.

40"

(1016 mm)

max.

Drain pipe

20 INSTALLATION

Connecting Water Supply

1

Before connecting, turn off the water supply.

2

Slide the exible stainless-steel water line or

copper tube into the elbow.

3

Tighten the compression nut and make sure that

the line is not kinked or pinched.

Valve Water supply

line

NOTE

• During the nal installation check of the dishwasher,

an IE error code may appear on the display. Make

sure the water line is not kinked and the water

supply for the dishwasher has been turned on

before calling for service.

Connecting Power

NOTE

• The best location for the electrical conduit is on the

right side of the back wall. Re-route the power cable

before installation if the electrical conduit pipe is

longer than 3" (76 mm) and is centered on the back

wall.

1

Before beginning, turn off electrical power to the

unit at the circuit breaker.

2

Remove the junction box cover and then install

the strain relief.

1 2

3

Twist the wire nuts tightly onto the wires; then

wrap each connection with electrical tape.

1 2 3

4

Check again and make sure that all wires are

connected correctly: black to black, white to

white, green ground wire to green ground wire.

5

Replace the junction box cover.

WARNING

• Verify that the black wire is hot (120 V). If not,

or if you are unsure of the power supply, have it

checked by a licensed electrician.

CAUTION

• Do not leave stripped wire exposed. Trim

stripped wire to t completely inside wire nuts.

Page is loading ...

LG LDT7808ST/00 Owner's manual

This manual is also suitable for

LG LDT7808ST/00 Owner's manual

in other languages

Related papers

Other documents