Panasonic CU-C12CKP6G Owner's manual

Brand: Panasonic

Model: CU-C12CKP6G

Category: Split-system air conditioners

Type: Owner's manual

This manual is also suitable for

Before using your air conditioner, please read

this operating instructions carefully and keep it

for future reference.

Panasonic®

Room Air Conditioner

OPERATINGINSTRUCTIONS

COOLING MODEL :-

Indoor Outdoor

Cs-cgCKPG CU-C9CKP6G

CS-C12CKPG CU-C12CKP6G

HEAT-PuMP MODEL :-

Indoor Outdoor

CS-A9CKPG CU-A9CKP6G

CS-A12CKPG CU-A12CKP6G

ENGLISH ....................... P. 1- P. 11

ESPAI_IOL ...................... P. 12- P. 22

Please register your product at

www.panasonic.com/register

For assistance, please call; (866)-292-7292, for

Hawaii residents call (868)-488-7779.

F563841

Thank you for purchasing our Panasonic Room Air

Conditioner.

CONTENTS

• Features ..................................................... 1

• Safety Precautions .................................... 2

• Installation Precautions

• Operation Precautions

• Name of Each Part ................................ 3~4

• Indoor Unit

• Outdoor Unit

• Accessories

• Remote Control

• Preparation Before Operation .................. 5

• Indoor Unit

• Remote Control

• How to Operate ...................................... 5-6

• Setting the Timer ....................................... 7

• Convenience Operation ............................ 7

• Powerful Mode Operation

• Economy Mode Operation

• Quiet Mode Operation

• Care and Maintenance .............................. 8

• Cleaning the Indoor Unit and Remote Control

• Cleaning the Air Filter

• Cleaning the Front Panel

• Air Purifying Filters

• Pro-season Inspection

• When the Air Conditioner is Not Used for an

Extended Period of Time

• Recommended Inspection

• Helpful Information ................................... 9

• Energy Saving and Operation Hints ........ 9

• Troubleshooting ...................................... 10

• Normal Operation

• Abnormal Operation

• Call the Dealer Immediately

• Product Specification and Reference ...... 11

Note:

Before using your air conditioner, please read

this operating instructions carefully and keep it

for future reference,

ili!i_!ii!_i_ii_i!i_iii!i!

i!!,_;_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_:_;_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i!_!_ii_iiii!i!iii!i_i'i_iiii_ii_i!i!iiii!i!ili!i!i!iiiiiiiii!i!iiiiii!i!iiiiii!i

• ,,,umina,,.gBut,on ii!_i_i_i_iiiiiiiili!ili!i!l,__romas,ao,e ,,_vo,,s_iiiii'iiiii_i!!!iiiiii!i!i!iiiiii_ii

Foryourconven_encetooperatetheunitinthedark. o_uP__ r_,"vD_,r,, ,',_r,vD_ r_

(Referpage4) :1 _-' __P2 /

• AutornaticOperation :1 _ ........... , .....

Sense indoor temperature to select the optimum _ore servicinn this

mode. -' app/iance_ ............. ° -

(Referpage5) I 4) _ctUornS_ff.thisappliance, donotrepairby

• euiatModa yoursel_rserv_cedealerfor

Zoprovidequietoperation. arepair.

(Referpage7) 5) _powe_supply).

• Economy Mode dis_ the equipment from the

Toreduceelectricalpowerconsumption. ;] mampowersupplymcaseotanemergency.

(Referpage7) P(3WFR._IlPPlY

• Powerful Mode _.,.=n ou ....

Reachesthedesiredroomtemperaturequickly. I7imeDelayFuse: RateeVolts: I

(Referpage7) :11 c5uA_'pCe_C9CKPG/ 115V I

• RemovableFrontPanel CS-A_KPG_' I

For quick and easy cleaning (washable). ] I CU-A9CKP6G I :

(Referpage8) 20Amps:CS-C12CKPG/ I

• AirPurifyingFilter II _,'_£K_6G, I

This new filter helps trapsmall airborne particles I _-_,I_E_ I

suchasdust, pollenandtobaccosmoke. CU-A12CKP6G

(aeferpage8) --

• SolarRefreshingDeodorizingFilter ]

Used to remove unpleasant odor and deodorize the

air in the room.

(Referpage8)

• *utoRastarfContro,

Restart the unit automatically after power failure.

(Refer(aeferpage9)page9)

SAFETY PRECAUTIONS

Before operating, please read the following

"Safety Precautions" carefully.

• TO prevent personal injury, injury to others and

property damage, the following instructions must be

followed.

• Incorrect operation due to failure to follow instructions

will cause harm or damage, the seriousness of which

is classified as follow:

L_ Warning

This sign warns of death or serious injury.

/_, Caution

This sign warns of damage to property.

• The instructions to be followed are classified by the

following symbols:

This symbol (with a white background) denotes an

action that is PROHIBITED.

These symbols (with a black background) denote

actions that are COMPULSORY.

• Installation Precautions

Z_ Warning

• Do not install, remove and reinstall the unit by

yourself.

Improper installation will cause leakage, electric

shock or fire. Please engage an authorized dealer

or specialist for the installation work.

L_ Caution

This room air conditioner must be

earthed.

Improper grounding could cause

electric shock.

• Ensure that the drainage piping is

connected properly.

Otherwise, water will leak out.

Do not install the unit in a

potentially explosive atmosphere.

Gas leak near the unit could cause

fire.

• Operation Precautions

z_ Warning

This sign warns of death or serious injury.

• Do not operate with wet hands

• Do not insert finger or other objects into the

indoor or outdoor units.

• Do not expose directly to cold air for a long

period of time.

O • Use specified power cord.

• If abnormal condition (burnt smell, etc)

occurs, switch off the power supply.

/_ Caution

This sign warns of injury.

Do not wash the unit with water.

Do not use for other purposes such as

preservation.

Do not use any combustible equipment at

airtlow direction.

Do not sit or place anything on the outdoor

unit.

• Switch off the power supply before cleaning.

• Ventilate the room regularly.

• Pay attention as to whether the installation

rack is damaged after a long period of usage.

• Switch off the power supply if the unit is not

used for a long period

NAME OF EACH PART

• Indoor Unit

[] Front Panel

[] Air Intake Vent

[] Air Outlet Vent

[] Vertical Airflow Direction Louver

[] Horizontal Airflow Direction Louver

(manually adjusted)

[] Indicator Panel

[] Auto Operation Button

(when the front panel is opened)

[] Economy Mode Indicator - GREEN

[] Powerful Mode Indicator

[] Power Indicator

[] Quiet Mode Indicator

[] Timer Mode Indicator

- ORANGE

- GREEN

- ORANGE

• Indoor Unit

(when the front panel is opened)

[] Front Panel

[] Air Filters

[] Air Purifying Filter

• Outdoor Unit

[] Air Intake Vents

[] Ground Terminal

(Inside cover)

[] Piping

[] Conduit

[] Drain Hose

[] Air Outlet Vents

• Accessories

• Remote Control

• Remote Control Holder

• Two RO3 (AAA) dry-ceil batteries or equivalent

• Air Purifying Filter

(Air Purifying Filter)

(Solar Refreshing Deodorizing Filter)

NAME OF EACH PART

• Remote Control

[]

• Remote Control Signal

• Make sure it is not obstructed.

• Maximum distance : 10 m (32.8 ft.).

• Signal received sound :

One short beep or one long beep.

• Notes for Remote Control

• Do not throw or drop.

• Do not get it wet.

• Certain types of fluorescent lamps may affect

signal reception. Consult your dealer.

[] Signal Transmitter

[] Operation Display

[] Quiet Mode Operation Button

[] Room Temperature Setting Button

(Illuminating button)

[] Operation Mode Selection Button

[] Economy Mode Operation Button

[] Auto Airflow Direction Button

[] ON-Timer Button

[] OFF-Timer Button

[] Reset Point

(Press with fine-tipped object to clear the memory)

[] OFF/ON Button

(Illuminating button)

[] Powerful Mode Operation Button

[] Fan Speed Selection Button

[] Manual Airflow Direction Selection Button

[] Timer Set Button

[] Timer Cancellation Button

[] Time-Setting Button

[] Clock Button

[] Remote Control Cover

• How to Insert the Batteries

1Slide down the remote control cover completely

to remove it.

2 Insert the batteries

- Be sure the direction is correct

- 12:00 on display - flashing

• Set the current time (CLOCK) immediately to

prevent battery exhaustion.

3 Re-install the remote control cover by inserting it

in the side groves and pushing inward.

• About the batteries

• Can beused for approximately one year.

• Observe the following when replacing the

batteries

• Replace with new batteries of the same type.

• Do not use rechargeable batteries (Ni-Cd).

• Remove the batteries if the unit is not going to be

used for a long period.

PREPARATION BEFORE OPERATION

Open the front panel

2 Remove the air filters

3 Fit the air purifying filters in place

4 Insert the air filters

5 Close the front panel

• Remote Control -To set the current time

1 Press .

2 Then press [] to increase or decrease the time.

3 Press [] again.

Set time on display will light up.

iiii!!

• Setting the Fan Speed

• Press [] to select:-

FAN m - Low Fan Speed

FAN mmm - Medium Fan Speed

FAN iiIIm IIII - High Fan Speed

AUTO

FAN

Automatic Fan Speed

The speed of the indoor fan is adjusted

automatically according to the operation.

The indoor fan stops occasionally during

cooling operation.

• Setting the Vertical Airflow Direction

• Press [] or [] to select:-

L Cooling Model J

COOL / DRY Operation

Swing up/down

Automatically

Five stages of adjustment

can be made between

14 ~ 36 angle.

FAN Operation

Move up/down

Automatically

Five stages of adjustment

can be made between

0 ~61 angle.

Heat Pump Model ]

COOL / DRY Operation HEAT Operation

Swing up/down

Automatically

- When the discharge air

temperature is )ow such

as at the start of heating

operation, the air blows

in a horizonta) direction.

As the temperature

rises, the hot air blows

in a downward direction.

- To stop this operation,

press MANUAL.

Five stages of adjustment

can be made between

14 ~ 36 angle.

Five stages of adjustment

can be made between

0 ~61 angle.

• Setting the Horizontal Airflow Direction

• Adjust it manually /

• Use this air conditioner under the following

conditions:

L Cooling Model 1

(Unit in °F)

DBT: Dry Bulb Temp Indoor Outdoor

WBT: Wet Bulb Temp DBT WBT DBT WBT

Maximum Temperature 89.6 73.4 109.4 78.8

Minimum Temperature 60.8 51.8 60.8 51.8

L Heat Pump Model ]

DBT: Dry Bulb Temp Indoor

WBT: Wet Bulb Temp DBT WBT

MaximumTemperature-CooUng 89.6 73.4

MaximumTemperature-Heating) (86) (-)

MinimumTemperature-Cooling60.8 51.8

MinimumTemperature-Heating)60.8: (-)

(Unit in °F)

Outdoor

DBT WBT

109.4 78.8

75.21 (64.4)

60.8 51.8

(23) (21.2)

• Notes

If the unit is not going to be used for an extended

period of time, turn off the main power supply. If it is

left at the ON position, approximately 2.5 W of

electricity will be used even if the indoor unit has been

turned off with the remote control.

If operation is stopped, then restart immediately, the

unit will resume operation only after 3 minutes.

• Operation Details

COOL - Cooling Operation

To set the room temperature at your preference

cooling comfort.

AUTO - Automatic Operation

Sense indoor temperature to select the optimum

mode.

Temperature is not displayed on the remote control

during AUTO operation.

DRY - Soft Dry Operation

A very gentle Cooling Operation, prior to

dehumidification. It does not lower the room

temperature.

During Soft Dry operation, the indoor fan operates at

Low fan speed.

HEAT - Heating Operation

(for Heat Pump Model only)

Heat is obtained from outdoor air to warm up the

room. When the outdoor ambient air temperature

faUs, the heating capacity of the unit might be

reduced.

Defrosting Operation

Depending on the outdoor temperature, the operation

occasionally stops to melt the frost on the outdoor

unit.

FAN - Air Circulation Operation

(for Cooling Model only)

When the room temperature reaches the set

temperature, operation commences at Low airflow

volume. It stops when the room temperature drops to

4°F below the set temperature.

(It is useful when using a heater).

Hi fan speed will not operate when using the air

circulation Fan mode.

SETTING THE TIMER

Ensure that the current time is correct before setting

the timer. The timer cannot be set if the time display

is flashing.

• ON-TIMER Operation

To start the air conditioner operation automatically.

• Press [] to set the operation.

• Press [] to increase or decrease the time.

• Then press [].

• To cancel this operation, press [_].

• OFF-TIMER Operation

To stop the air conditioner operation automatically.

• Press [] to set the operation.

• Press [] to increase or decrease the time.

• Then press [].

• To cancel this operation, press [_].

• Timer Mode Operation Details

• When the ON-Timer is set, operation will start

before the actual set time. This is to enable the

room temperature reaches the set temperature at

the set time.

COOL,DRY, ->15 minutes COOL,DRY, ->15 minutes '

AUTO in advance I in advance

HEAT, AUTO->30 minutes

in advance

• Once the ON/OFF Timer is set, operation will

start/step at the set time everyday.

• The current time is not displayed when the timers

are set.

• When both timers are used together, the TIMER

mode indicator on the indoor unit remains lit even

when the operation is stopped by the OFF-TIMER.

ii!ii!ii!i!i!iiiii!ii!iii!iii iii!i!iiiii!!i!i!ii!iiiiiii!iiil

• Powe,ulModeOperation iii!i!i!iiii!iii!!iiiiii!iii!iiill• QuietModeODeration iiiiiiiii!iiiiiiiiliiii!iiiiii!!!!

temperature q_ckly. ;i!iiiiiii!i;ili!ilJ Tn nrnvid# n_i_r nn_r_tinn iil;;iii!!il;ii!!!i;ili!iill

(orange) on the indoor ili!i!i;;i;iiii:;iil_ou_n_twill lieht up. iii!;;ii!i!i!i!!i!iiiiii!il

unit will light up. ;i!iiiii!i;iiiifliii!i:;i;i;I_fion. Dress once more. _ ' iiii!!_;i!i!iil;ii:!ii!i;!i!i;iil;i

__,m_son_y iiil;iiii_;ii_iiii;ii!iiiiiiill ' - i_i_ili_i_i;;;iiiiii_i;iiii!;i_!i;ii

tion, pressonce more. i;iii;;i!i_;iiil;;!i;i_i!i!;;;!!;I _O_ucedurinqoperation. ii;;ii!i_;;!;;il;!;;i;;iii!;;i!i

• EconomyModeOperation iiii!i!ili!i!i;i;iiiii;iii!;!i!ii=l - . iiil;;i;iii!i!iiii!iil;!;!i;ii!i!!i;!i

TO save electrical powerconsumption, iiiiiiiiiiiiii!ii!i!i!i!i!iiiii_iiiiiiii!iiiiiiiiiiiii!:i!iiii!iil

Pleaseuse _hen the room hasreached

_F_dtemperature- iiiiii!iiiiiiiiiiiiiiiil;i_iiiii!iiii!i!i!i:i!i!i!i!

• Press [].

_en) on the indoor unit

a ce so e n. iiiii:ii!:ilili'i!i!i!:!i;!;iiii!iii : i:i!i!::ii:!i!ii!!ili:i!iii!;ii:!

• _a°nDt'a_ ii!i!i!i!i!iiii!iiiiiii!iii!i!iiiii!i!iii!i!i!iiiiili!i:ii!iii!

_ul operation cannot be iiiii_iii!!iliiiii!iii!!il;iiii;;i!ili!!

_ture and airt_wvolume iiii]iiiiiiiiiiii[iiiiiiiii!iiiiiili:iiii!iiiiii!!

_tureanda,rtlowvo,ume iiiii!iliiii:!!:i!i!iiiii!ili!iii!i!!!iliiiiii!i!!

_,,._._=, ...... h.... . iii!ii!i_i;:!!i!i;i_!l iiiiii!_i!ii_i!ii_i!i_il

_ispressed, economyor ii!iii:iii!iiiiiii!iiiii!ilili!iiiii!iii:iiii!i!iii!ii!i!ili,!ii!i!;;

_d_ .......,., iii!iif_'ii!i!ii_i:iii!_iiii!ii!iiiii_ii_i!ii!iiii_i!i;!i;iii,!i_

_peration, the powerful i!!_iiiii;iiii!i!ili! i!i!i!iiiii!;iii!i;ii!i!i

and economy operation are not available, iiiiii!iiiiii!!!i!ilili!!ili!l iiiiiii!ii:!ii!iliiiiii:ii!iiii

iiiii!!!ili!!!iiiiii!i!iliiiiiiiii!iiii!!!i!ii!ili!!!iiiiiilil

Economyiode Temperature Airflow i!iii!i!iiiii;;iiiiiiiii!;ii!i;iii!;;!i!i;iiii!i;i;iil;!!ii

Operatmn volume

l_Fhi_her ^ . iiiii!!!!i!!i!ii!i:iiiii!ili!i!;i;iiiiii!ii!i

HEAT t°F Io_er .... iiiiii!;!i;iiiii!!i!;:i:il;iiii!iiiiil;!!i!i!ii!ii!:i}i!ii!

I edelont I " I I iii i:i i! !i!ii!i!iiiii:i!ii iii i!i!iiiiii! iii:iiiii iiiii!i i!i!

CARE AND MAINTENANCE

• Cleaning the Indoor Unit and Remote

Control

• Wipe gently with a soft, dry cloth.

• Do not use water hotter than 104'F or polishing fluid

to clean the unit.

• Cleaning the Air Filter

(Recommendation:- If the unit is operated in a dusty

environment, clean the filters every two weeks.

Continuous use of this dirty filters will reduce cooling

or heating efficiency)

1 Remove dirt using a vacuum cleaner.

2 Wash back of the air filter with water.

3 If badly soiled, wash it with soap or a mild household

detergent.

4 Let it dry and reinstall it.

Be sure the "FRONT" mark is facing you.

Damaged air filter.

Consult the nearest authorized dealer.

Part No.: CWD001098.

• Do not use benzene, thinner, scouring powder or

clothes soaked in caustic chemical to clean the unit.

• Cleaning the Front Panel

(Must be removed before washing)

1 Raise the front panel higher than the horizontal and

pull to remove it.

2 Gently wash with water and a sponge.

• Do not press the front panel too hard when washing.

• When use kitchen cleaning fluid (neutral detergent),

rinse throughly.

• Do not dry the front panel under direct sunlight.

3 To affix the front panel, raise the front panel

horizontally, match the protruding portion on the

indoor unit to the fulcrum and push into place.

Protruding portion on indoor unit

• Air Purifying Filters

Raise the

front panel

Solar Refreshing

• Solar Refreshing Deodorizing Filter

• Used to remove unpleasant odor and deodorize

the air in the room.

• Reusable.

• Vacuum, place under direct sunlight for 6 hours and

fit it back in place.

(Recommended: every 6 months)

• Recommended to change this filter every 3 years.

• Air Purifying Filter

• This new filter helps trap small airborne particles

such as dust, pollen and tobacco smoke.

• Recommended : change this filter every 3 months.

Do not reuse damaged filters.

Consult the nearest authorized dealer to purchase a

new filter.

Air Purifying Filter No.: CZ-SF51P

Solar Refreshing Deodorizing Filter No.: CZ-SFD7OP

If you operate the air conditioner with dirty filters:-

- Air is not purified

-Cooling or heating capacity decreases

- Foul odor is emitted

• Pre-season Inspection

• Is the discharged air cold/warm?

Operation is normal if 15 minutes after the start of

operation, the difference between the air intake and

outlet vents temperature is:-

HEAT-> 25°F or above

• Are the air intake or outlet vents of the indoor or

outdoor units obstructed?

• Are the remote control batteries weak?

If the remote control display appears weak, replace

the batteries.

• When the Air Conditioner is Not Used

for an Extended Period of Time

1 To dry the internal parts of the indoor unit, operate

the unit for 2 - 3 hours using:-

_FA N _:e°r'i_._n MOde' _- ]

set temperature

2 Stop the operation by remote control and switch off

the circuit breaker.

Note : If the unit is not switched off by the remote

control, it will start operating when the circuit

breaker is switched to ON. (The unit is equipped

with Auto Restart Control.)

3 Remove the remote control batteries.

• Recommended Inspection

• After used over several seasons, the unit will

become dirty and thus decreases the unit's

performance. Depending on the operation

conditions, a dirty unit may produce odor and dust

may pollute dehumidification system. Therefore, a

seasonal inspection is recommended in addition to

regular cleaning. (Consult an authorized dealer.)

HELPFUL INFORMATION

• Auto Operation Button

• Raise the front panel and press.

• Automatic Operation

• If the remote control fails to function or has been

misplaced, press the Auto Operation button to start

the Automatic operation.

• The Automatic operation will be activated

immediately once the Auto operation button is

pressed. However, temperature cannot be adjusted

when in this mode.

• The power indicator on the indoor unit will blink until

the operation mode is selected automatically.

• To cancel this operation, press once more.

• Remote Control Signal Receiving Sound

• To switch off the beep (Signal Receiving Sound),

press the Auto Operation button for 10 seconds

continuously or longer.

A "beep", "beep" sound will be heard at the

tenth seconds.

Note : A "beep" sound will be heard at the fifth

seconds;

However please press continuously until you

heard "beep", "beep" sound.

• Repeat the above steps if you want to switch on the

Signal Receiving Sound.

• (This is for Servicing purposes only.)

Note: If you press this button continuously for 5 to 10

seconds, Test Run operation will be performed. A

"beep" sound will be heard after five seconds

indicating the Test Run starts to operate.

_ter a power failure, the • Setting the Temperature

operation will restart automatically after 3- 4 _tr,(_ can be saved.

minutes. _e tgher or lower than the

_tornatically under the desired temperature.

prewous opera_rflow direction when r _ _ ]

power is resumed as the operation is not stopped _ Cooling Model

by the remote control I I COOling Operati°n : 2°F higher I

• .... .,oo..,,ho '

_imer setting will be _ 14r=_rPt=mn Y,',r_l 1_

cance,led_e us me,d reset the t_rner. I I C_er I

• _th_ h,,at__....... I Heating Operation : _ Lower I

with a built-in surge

pro_er, in order to further

protect your air conditioner from being damaged by • Air Filters

abnormally strong lightning actMty, you may switch _r filters every 2 weeks.

TROUBLESHOOTING

• NormalOperation

_Is it okay? -t

Air conditioner has been restarted, but does not

operate for 3 minutes.

Solution

This is to protect the air conditioner. Wait until the air

conditioner begins to operate.

A sound like water flowing can be heard This is the sound of refrigerant flowing inside the air

conditioner.

Itseems that fog is coming out from the air

conditioner.

Condensation occurs when the airflow from the air

conditioner cools the room.

The room has a peculiar odor. This may be a damp smell emitted by the wall,

carpet, furniture or clothing in the room.

During Automatic Vertical Airflow setting,

indoor fan stops occasionally.

This is to remove smell emitted by the surroundings.

The outdoor unit emits water or steam

In COOL/DRY operation, moisture in the air

condenses into water on the cool surface of outdoor

unit piping that causes dripping.

• (For Heat Pump Model only)

Operation stops for about 12 minutes during

heating (The power indicator blinks.)

• This is to melt the frost which has accumulated on

the outdoor unit (defrosting operating). This will take

no longer than about 12 minutes. Water drips from

the outdoor unit. Wait until this operation ends. (The

power indicator will light up.)

(Frost accumulates on the outdoor unit when the

outdoor temperature is low and humidity is high.)

• (For Heat Pump Model only)

During heating operation, indoor fan may

run at on and off conditions.

• This is to prevent undesired cooling effect during

heating operation.

• Abnormal Operation

Check the following points before calling for repairs or service. If the malfunction persists, please contact your nearest

servicenter. For assistance, please call: (866)-292-7292, for Hawaii residents call (808)-488-7779.

• The air conditioner does not operate.

• Air conditioner produces loud noise during

operation.

• The air conditioner does not cool or warm

effectively.

• Remote control / display doesn't work.

Please check

• Has the circuit breaker been tripped?

• Is the timer being used correctly?

• Is the installation work slanted?

• Is the front grille closed properly?

• Has the temperature been set incorrectly?

• Are the filters dirty?

• Are the intake or outlet vents of the outdoor unit

obstructed?

• Are all windows and doors closed?

• Batteries not inserted?

• Batteries correctly inserted (+) and (-)?

• Call the Dealer Immediately

ff the following conditions occur, turn off the circuit

breaker, and then call your authorized Panasonic dealers

or servicenter.

• Abnormal noise is heard during operation.

• Water or foreign material gets into the remote

control by mistake.

• Water leak from the indoor unit.

• Switches or buttons do not operate properly.

• The circuit breaker switches off frequently.

Power supply cord becomes unusually warm.

Service information can be obtained by calling

(866)-292-7292, for Hawaii residents call (808)-488-7779.

To expedite the repair of your air conditioner:

Please have your proof of purchase.

List all symptoms the unit is exhibiting.

PRODUCT SPECIFICATIONS

Models Cs-cgCKPG CS-C12CKPG CS-A9CKPG CS-A12CKPG

CU-C9CKP6G CU-C12CKP6G CU-A9CKP6G CU-A12CKP6G

ELECTRICAL Phase 1 1 1 1

RATING Frequency (Hz) 60 60 60 60

Voltage (V) 115 115 115 t15

Capacity (Btu/h) 8,800 12,300 8,200 t2,000

Current (Amp) 7.2 10.3 7.4 10.6

Input Power (Watts) 790 1,160 81O 1,200

COOLING EER (Btu/Watt.h) 1t.10 t 0.60 t g.t 2 10.00

SEER 12.4 t 1.20 10.8 10.6

Room Air Circulation (cf/min) 310 340 310 340

Capacity (Btu/h) - 9,200 t 3,500

Current (Amp) - 6.7 10.5

HEATING Input Power (Watts) - 730 1,190

COP (Btu/Watt.h) - t 2.60 1t .34

HSPF - 8.0 7.4

Room Air Circulation (cf/min) - 350 360

MOISTURE

(pints/h) 1.7 t .5 2.7

REMOVAL

DIMENSIONS

Indoor Height cm (inches)

Width cm (inches)

Depth cm (inches)

Outdoor Height cm (inches)

Width cm (inches)

Depth cm (inches)

27,5 (tO- 13/16)

79.9 (31- 15/32)

21.0 (8 - 9/32)

54.0 (21 - 1/4)

78.0 (30 - 23/32)

28.9 (11- 3/8)

3.0

33 (73)

37 (82)

NET Indoor kg (Ib) g (20) ',- '-

WEIGHT

Outdoor kg (Ib) 29 (64) 31 (68) 35 (77)

GROSS Indoor kg (Ib) 11 (24) ',- '-

WEIGHT

Outdoor kg (Ib) 33 (73) 35 (77) 39 (86)

Specifications are subject to change without notice for further improvement.

• REFERENCE

Model Number:

Dealer's Address:

Dealer's Tel :

Serial Number :

(Located on the side of unit)

Date of Purchase :

Dealer's Name:

r "1

Please affix your proof of purchase here for

I future reference. I

I. J

Muchas gracias por elegir la unidad de Aire

Acondicionado de Panasonic.

CONTENIDO

• Caracteristicas ....................................... 12

• Medidas De Seguridad ........................... 13

• Precauciones al instalar

• Precauciones al operar

• Nombre De Cada Pieza .................... 14~15

• Unidad Intedor

• Unidad Exterior

• Accesodos

• Control Remoto

• Prepacion Antes Del Funcionamiento .... 16

• Unidad Intedor

• Control Remoto

• Como Hacerlo Funcionar ................. 16~17

• Ajuste Del Temporizador ....................... 18

• Funcionamiento Conveniente ............... 18

• Funcionamiento en modo plena potencia

• Funcionamiento en modo econ6mico

• Funcionamiento en modo silencioso

• Cuidado Y Mantenimiento ..................... 19

• Limpieza de la Unidad Interior y e Control

Remoto

• Limpieza de los Filtros de Aire

• Limpieza del Panel Frontal

• Filtros Purificadores de Aire

• Inspecci6n de Pretemporada

• Cuando el Acondicionador de Aire No se Utiliza

Durante un Perfodo Largo de Tiempo

• Inspecci6n Recomendada

• Informacion Util ...................................... 20

• Sugerencias Para Ahorrar

Energia y Para un Mejor

Funcionamiento ...................................... 20

• Localizacion De Averias ........................ 21

• Funcionamiento Normal

• Funcionamiento Anormal

• Comuniquese con el Distribuidor

Inmediatamente

• Especificaciones Del Producto ............. 22

Nota:

Antes de usar el acondicionador de aire, sirvase leer

atentamente estas instrucciones de funcionamiento

y conservarlas como futuro elemento de consulta,

CARACTER(STICAS

• Boton Iluminable

Para facilitar su manipulaci0n en la oscuridad.

(P&gina 15)

Funcionamiento Automatico

Tome la temperatura interior para seleccionar el

modo m_s apropiado.

(P&gina 16)

• Modo Silencioso

Para un funcionamiento silencioso.

(P&gina 18)

• Modo Economico

Para reducir el consumo de energia e(_ctrica.

(P&gina 18)

Modo Potente

AIcanza la temperatura deseada de la habitaci6n

r&pidamente.

(P&gina 18)

• Panel Frontal Extraible

Para una limpieza m&s r&pida y sencilla. (lavable)

(P&gina 19)

Filtro De Purificador De Aire

Es un filtro que puede retener el polvo, el humo de

tabaco y las particulas microsc6picas del aire de la

habitaci6n.

(P&gina 19)

Filtro solar desodorizador y refrescante

Sirve para eliminar el olor desagradable y para

desodorizar el aire de la habitaci6n.

(P&gina 19)

Control Automatico De Puesta En Marcha

Despu6s de un fallo de corriente pone en marcha

autom_ticamente la unidad.

(P&gina 20)

/_Adve_encia

1) Haga funcionar el aparato de aire acondicionado

conect&ndolo a una fuente estable de CA de 115 voltios.

2) Utilice un fusible de retardo de 15 Amperios (CS-

C9CKPG/CU-C9CKP6G, CS-A9CKPG/CU-A9CKP6G) o

20 Amperios (CS-C12CKPG/CU-C12CKP6G, CS-

A12CKPG/CU-A12CKP6G) un interrupter.

3) Antes de efectuar el mantenimiento de este aparato

desenchQfelo de la red.

4) No Io repare usted mismo.

En el caso de funcionamiento defectuoso de la unidad,

no Io repare usted mismo. Acuda a( representante de

ventas o a( servicio t_cnico para su reparaci6n.

5) Desconecte la alimentaci6n (corte del suministro

principal de corriente).

Desconecte e( enchufe del tomacorriente, desconecte el

interuptor de circuito o desconecte (a aUmentaci6n

desconectando el equipo del suministro principal de

alimentaci6n para evitar accidentes.

TOMA DE CORRIENTE

Fusible de retardo:

15 Amperios: CS-C9CKPG/

CU-C9CKP6G,

CS-A9CKPG/

CU-A9CKP6G

20 Amperios: CS-C 12CKPG/

CU-C12CKP6G,

CS-A12CKPG/

CU-A12CKP6G

Vottaje asignado:

115V

MEDIDAS DE SEGURIDAD

Antes de operar el equipo, por favor lea

cuidadosamente las siguientes "Medidas de

Seguridad"

• Para prevenir heridas personales, heridas a otras

personas y daSos de la propiedad, se deben seguir

las siguientes instrucciones.

• El uso incorrecto per no seguir las instrucciones

puede causar daSos o averias; su gravedad se

clasifica con las indicaciones siguientes:

/_ Advertencia

Esta indicaci6n muestra la posibilidad de causar

muerte o daSos serios.

/_ Cuidado

Esta indicaci6n advierte sobre la posibilidad

de daSos a la propiedad.

• Las instrucciones a seguir est_m clasificadas

mediante los sirnbolos siguientes:

Simbolo (con el fondo blanco) denota una acci6n

que estA PROHIBIDA.

Simbolos (con el fondo negro) denotan una acci6n

que es OBLIGATORIA de hacer.

iiiiili!!!!i!ii!iiiii

IIPrecaucionesal Instalar

NOMBRE DE CADA PIEZA

• Unidad Interior

[] Panel Frontal

[] Entrada De Aire

[] Salida De Aire

[] Persiana Vertical Para El Flujo De Aire

[] Persiana Horizontal Para El Flujo Del Aire

(Ajustada Manualmente)

[] Panel indicador

[] BotSn de funcionamiento autom&tico

(AI abrir el panel frontal)

[] Indicador del modo econSmico

[] Indicador del modo de plena potencia

[] Indicador de energia

[] Indicador del modo de silencioso

[] Indicador del modo de temporizador

-VERDE

-NARANJA

-VERDE

-NARANJA

• Unidad Interior

(al abrir el panel frontal)

[] Panel frontal

[] Filtros de aire

[] Filtros purificadores de aire

• Unidad Exterior

[] Entrada de aire

[] Terminal a tierra

(Cobertura interior)

[] Tuberia

[] Conducto

[] Manguera de drenaje

[] Salida de Aire

• Accesorios

• Control Remoto

• Soporte del control remoto

• Dos Pilas Secas RO3 o su equivalente

• Filtros Purificadores De Aire

(Filtro purificador de aire)

(Filtro solar desodorizador y refrescante)

NOMBRE DE CADA PIEZA

• Control Remoto

[]

[] []

• Sehal de! mando a distancia.

• Asegt_rese de que el paso de la seral no est_

obstruido.

• Distancia m_xima: 10 m (32,8 ft.).

• Sonido de recepcion de la serial :

Un pitido corto o un pitido largo.

• Notas para el mando a distancia.

• No tire o deje caer el control remoto.

• No Io moje.

• AIgunos tipos de I_mparas fluorescentes pueden

afectar la recepci6n de la seraL Consulte a su

comerciante.

[] Transmisor de serales

[] Visualizaci6n de funciones

[] Bot6n de funcionamiento en modo silencioso

[] Bot6n de ajuste de la temperatura de la habitaci6n

(bot6n iluminable)

[] Bot6n de selecci6n de modo de funcionamiento

[] Bot6n de funcionamiento en modo econ6mico

[] Bot6n de selecci6n autom&tica de la direcci6n del

fiujo de aire

[] Bot6n de conexi6n del temporizador

[] Bot6n de desconexi6n del temporizador

[] Puntos de reajuste

(Pulsar con un objeto de punta fina para borrar la

memoria)

[] Bot6n OFF/ON (Conexi6n/desconexi6n)

(bot6n iluminable)

[] Bot6n de funcionamiento en modo potente

[] Bot6n de selecci6n de la velocidad del ventilador

[] Bot6n de selecci6n manual de la direcci6n del fiujo de

aire

[] Bot6n de ajuste de la hora

[] Bot6n de cancelaci6n

[] Bot6n de ajuste de la hora

[] Bot6n del reloj

[] Tapa del mando a distancia

• Como insertar las pilas

1 Deslice hacia abajo por completo la tapa de!

mando a distancia para retirarla.

Inserte las pilas

-Compruebe si es la posici6n correcta.

- 12:00 en el visor - parpadeando.

• Ajuste inmediatamente la hora actual en el reloj

para evitar el desgaste de las pilas.(CLOCK)

Vuelva a colocar la tapa del mando a distancia

insertandola en las ranuras laterales y haciendo

presion hacia dentro.

• Notas sobre las pilas

• Se pueden utilizar durante aproximadamente un

aro.

• Siga las siguientes condiciones cuando

reemplace las pilas

• Utilice pilas nuevas del mismo tipo.

• No use pilas recargables (Ni-Cd).

• Retire las pilas si no piensa utilizar la unidad

durante un largo tiempo.

PREPARACION ANTES DEL

FUNCIONAMIENTO

• Unidad Interior

1 Abra ]a parrilla delantera

2 Retire los filtros de aire

3 Coloque en su lugar los flitros purificadores de aire.

4 Inserte los filtros de aire

5 Cierre el panel frontal

• Control Remoto - Para poner en hora

1 Presione _.

2 A continuacion presione [] para cambiar la hora

en sentido ascendente o descendente.

3 Vuelva a presione [_.

La hora actual se iluminar& en el visor.

COMO HACERLO FUNCIONAR

• Para iniciar el funcionamiento

• Presione [_.

• El indicador POWER (energ(a) (verde) de la unidad

interior se encender&

• Para parar, presione una vez mg.s.

• Ajuste del modo

• Presione [] para seleccionar:-

{ Modelo de refrigeraci6n }

AUTO- Funcionamiento en modo autom&tico

COOL- Funcionamiento en modo refrigeraci6n

DRY - Funcionamiento en modo secado suave

FAN - Funcionamiento en modo circulaci6n de aire

Modelo Bombade Calor }

AUTO- Funcionamiento en modo autom&tico

HEAT - Funcionamiento en modo calefacci6n

COOL- Funcionamiento en modo refrigeraci6n

DRY - Funcionamiento en modo secado suave

• Ajuste de la temperatura

• Presione [] para aumentar o reducir (a temperatura.

• La temperatura se puede ajustar entre 60°F ~ 86°F.

• Temperatura recomendada:

f M°del° de refrigeradSn ]] r[ Model° B°m°ba de Cal°r ]]

COOL ->75F [_78F / /COOL -.._752oF.T._78F /

par debajo de (a por debajo de la

temperatura ambiente t_emperatura aml%_ente

HEAT -> 68°F ~ 75°F

• Durante el funcionamiento en AUTO, presione [] para

se(eccionar>

• Funcionamiento a 4°F por encima de la

temperatura ambiente.

• Funcionamiento a la temperatura ambiente.

• Funcionamiento a 4°F por debajo de la

temperatura ambiente.

• Temperatura estandar

• Cada vez que el baton de se(eccion de modo de funcion

as presionado, e( sensor de tempura interior funciona

automaticamente para se(eccionar el modo de funcion

deseado con Enfriamiento o Secado Suave.

• Una vez seleccionado el modo de funcionamiento, _ste

no cambia.

i [ Modelo Bomba de Calor }

Temperatura Temperatura

de interior Operaci6n estAndar

Enfriado 77°F

Secado Suave 72°F

Aquecimento 70°F

• AI inicio del funcionamiento automatico, )os modos de

Calefacci6n, Refrigeraci6n o Secado Suave se

se(eccionan de acuerdo con )a temperatura interior.

• El modo de operaci6n cambia cada hora, cuando sea

necesario.

• Ajuste de la velocidad del ventilador

• Presione [] para se(eccionar:-

FAN • - Velocidad baja del ventilador

FAN =lira - Velocidad media del ventilador

FAN ==mmm - Velocidad alta del ventilador

AUTO

FAN - Ve(ocidad autom&tica del ventilador

La ve(ocidad del abanico interior es

ajustada autom&ticamente de acuerdo

con el funcionamiento. La ve(ocidad del

abanico interior se apaga temporalmente

durante el funcionamiento de la

modalidad de refrigeraci6n.

• Ajuste de la direccion vertical del flujo de aire

Presione [] o [] para se(eccionar:-

[_[ Modeloderefrigeraoi6n _

ICOOL/D.v FAN /

I Funcionamiento Funcionamiento I

Cambie autom&ticamente se mueve hacia arriba o

hacia arriba / abajo hacia abajo autom&ticamente.

Pueden estabiecerse Pueden establecerse

cinco etapas de ajuste cinco etapas de ajuste

b.ngulo 14 - 36. &ngu(o 0 - 61.

"_[ Mode(o Bomba de Calor

COOL/DRY HEAT m

Funcionamiento Funcionamiento I

- Cuando la temperatura del

I _ aire es baja, como en el

_ caso del arranque de la

36° y _ calefacci6

/ _ sentido h(

/ I-/ la temper_

.... caliente s_

t, amb_e automat_camente _ - -

• , , - _'ara oeTe

hac=aarnba / abaJo funcionarr

MANUAL.

Pueden establecerse

cinco etapas de ajuste

entre 14° ~ 36°.

calefacci6n, el aire sopla er

sentido horizontal. Cuando

la temperatura sube, el aire

caliente sopla hacia abajo.

- Para detener este

funcionamiento pulse

Pueden establecerse

cinco etapas de ajuste

entre O° ~ 61%

[]

AJUSTE DELTEMPORIZADOR

Asegl_rese de que la hora actual es la correcta antes

de ajustar los temporizadores. Los temporizadores

no pueden ser ajustados si el visualizador de la hora

emite destellos.

• Funcionamiento ON-TIMER (Temporizador de conexion)

Pare poner en marcha autom_ticamente el

acondicionador de aire.

• Presione [] para programar el funcionamiento.

• Presione L_ para aumentar o reducir el tiempo.

• Luego presione _.

•Para cancelar esta operaciSn, presione [].

• FuncionamientoOFF-TIMER(Temporizador de desconexion)

Pare parar autom&ticamente el tuncionamiento del

acondicionador de aire.

• Presione [] para programar el funcionamiento.

• Presione L_ para aumentar o reducir el tiempo.

• Luego presione _.

•Para cancelar esta operaciSn, presione [_.

• Detalles sobre el funcionamiento en modo temporizador

• Cuando se ajusta ON-Timer, el tuncionamiento

comenzar_ antes de la hera ajustada actual Esto es

pare permitir que la temperatura de la habitaciSn

alcance la temperatura ajustada a lahora ajustada.

fMode,odere,r,0erac,,n mba

OOL, DRY, -> 15minutes I I COOL, DRY -> 15 nTmutosI

UTO en / / en I

progresi6n progresiSn

HEAT, AUTO-> 30 minutos

en ..

progres_on

• Una vez establecido el mecanismo de encendido y

apagado automatico ON/OFF), el aparato se pondr_.

en marcha diariamente ala hora establecida.

• La hera actual no se visualize cuando se ajustan los

temporizadores.

• Cuando se usan ala vez ambos temporizadores, el

indicador de modo TIMER (temporizador de la

unidad interior permanece encendido cuando el

OFF-TIMER detiene el aparato.

FUNCIONAMIENTO CONVENIENTE

• Funcionamiento en modo plena potencia

Para conseguir r_.pidamente la temperatura

establecida.

• Presione _].

El indicador del modo de plena potencia (naranja)

se enciende en la unidad interior.

El modo potente funcionar_ s61odurante 15 minutes.

• Pare canceler esta operaciSn, vuelva a presionar

otra vez.

Funcionamiento en modo econbmico

Para ahorrar on el consume de energina.

Conviene usar este modo cuando la habitaciSn ha

alcanzado la temperatura deseada.

• Presione [_.

El indicador del modo econSmico (verde) se

enciende on la unidad interior.

• Para cancelar esta operaci6n, vuelva a presionar

otra vez.

Detalles sobre el funcionamiento del modo

economico/plena potencia

• No es posible seleccioner simult_.neamente los

modos EconSmico y Potente.

• Los cambios de la temperatura y del flujo de aire

son autom_ticos.

• El visor del mando a distancia permanece sin

cambios.

• Si se pulse el de funcionamiento, se cancelar&n el

modo de economia o de m_.xima potencia.

• Durante el FAN funcionamiento del ventilador-

circulaciSn de aire, los modos potente y econSmico

no est&n disponibles. (sSIo mode de refrigeraci6n)

Funcionamientoen Temperatura Volumen de

modo economico flujo de aire

COOL / DRY I°F pot encima de la Super bajo

temperaturaestablecida

HEAT 1°Fpordebajode la

(s61opare el modelo AutomAticos

de Bombe de Calor) temperaturaestablecida

Funcionamientoen Volumen de

modo plena potencia Temperatura flujo de aire

COOL / DRY 5°F par debajo de Ia Super alto

temperatura establecida

HEAT

(s61opare el modelo 5°F par encima de la AutomAticos

de Bombe de Calor) temperatura establecida,

• Funcionamiento en modo silencioso

Para un funcionamiento silencioso.

• Presione _.

El indicador del modo silencioso se enciende en la

unidad interior.

•Para cancelar esta operaci6n, vuelva a presionar

otra vez.

• Detalles de funcionamiento

• El sonido del aire se reduce durante el

funcionamiento.

CUIDADO Y MANTENIMIENTO

• Limpieza de la Unidad Interior y el

Control Remoto

• Limpie suavemente con un trapo suave y seco.

• No use agua per encima de los 104°F ni

abrillantadores para limpiar la unidad.

• Limpieza de los Filtros de Aire

(Recomendaci6n: Si la unidad funciona en un ambiente

con polvo, limpie los filtros cada dos semanas, ya que el

use continuado de estos filtros sucios reduce la eficacia

de la refrigeraci6n o calefacci6n)

1 Quite la suciedad utilizando una aspiradora.

2 Lave la parte posterior del filtro de aire con agua.

3 Si est_.n muy sucios, IAvelos con jab6n o con un

detergente suave.

4 Deje secar los filtros y col6quelos de nuevo.

Asegt3rese de que el lado marcado "FRONT" se

encuentra hacia adelante.

Filtro de aire averiado.

Consulte con su comerciante autorizado mAs

proximo.

Pieza No: CWD00109&

No use bencina, thinner, desengrasadores ni paSos

empapados en productos c_.usticos para la limpiar la

unidad.

• Limpieza del Panel Frontal

(Debe ser removido antes de lavarlo)

1 Levante el panel frontal par encima del horizontal y tire

para extraerlo.

2 L_ve]osuavemente con agua y una esponja.

• No presione el panel frontal dernasiado fuerte

cuando Io lave.

• Cuando use limpiadores de cocina

(detergente neutro), aclare abundantemente.

• No seque el panel frontal bajo la luz directa del sol.

3 Para fijar el panel frontal, levante el panel frontal

horizontalmente, h&ga coincidir la porte sobresaliente de

la unidad de interior con el punto de apoyo y haga

presiSn para fijarlo.

Soporte de la unidad interior

iiiiiii!i!01_ili_iiii_!

Page is loading ...

Panasonic CU-C12CKP6G Owner's manual

Brand: Panasonic

Model: CU-C12CKP6G

Category: Split-system air conditioners

Type: Owner's manual

This manual is also suitable for

Download PDF

report

in other languages

español: Panasonic CU-C12CKP6G El manual del propietario

Panasonic CU-C12CKP6G Owner's manual

This manual is also suitable for

Panasonic CU-C12CKP6G Owner's manual

in other languages

Related papers

Other documents