SmartRack Bolt-Down Kit - Secures stabilizing
brackets or plates to facility floor
MODEL NUMBER: SRBOLTDOWN
Description
Tripp Lite's SmartRack SRBOLTDOWN provides extreme stabilization and security for cabinets and racks. The bolt-down kit enables SmartRack to be
secured to a concrete floor. SRBOLTDOWN includes four concrete inserts, four bolts and four fender washers.
Technical Notes:
We recommend using a 1/2" concrete drill. Hole must be 4.5" to 4.75" deep. Mark the hole, drill the hole, then tap the anchor into the hole. Thread the bolt into
the anchor a few threads only. Tap the bolt with a hammer (with anchor attached) until it bottoms out in the hole, then tighten the bolt.
Features
Provides extreme stabilization and security for cabinets and racks
The bolt-down kit enables SmartRack to be secured to a concrete floor
Includes four concrete inserts, four bolts and four fender washers
Specifications
General Info
RoHS Y
OVERVIEW
Model Type Stabilization
Accessories Type Bolt-Down Kit
PHYSICAL
Shipping Dimensions (hwd / in.) 1 x 4 x 4
Shipping Dimensions (hwd / cm) 2.54 x 10.16 x 10.16
Highlights
Bolt-down Kit for cabinets and
racks
Enables SmartRack to be
secured to concrete floor
Provides extreme stabilization
and security
Includes required nuts and bolts
Package Includes
Four concrete inserts, four bolts,
four fender washers
1 / 2
Shipping Weight (lbs.) .90
Shipping Weight (kg) 0.41
WARRANTY
Product Warranty Period (Worldwide) 5-year limited warranty
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
2 / 2
/