Brodit ProClip 654705 Datasheet

Category
Holders
Type
Datasheet

This manual is also suitable for

26 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 654705
654705 ProClip
Center mount, ONLY for models that has a speaker cover on top of the dashboard
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320286547055
Item no 654705 fits:
Chevrolet Camaro 10-15 (For all countries)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap openers into the gap between the dashboard and the top cover, to widen the gap. Peel off the
cover of adhesive tape on the ProClip.
2. Place the front hooked edge of the ProClip into the gap between the gap openers. Slide the ProClip forward
until you hear or feel it click downward.
3. Place your fingers on top and front of the ProClip and press down and forward for best possible attachment of
the adhesive tape. Pull out the gap openers.
4. The ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit ProClip 654705 Datasheet

Category
Holders
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI