Cables Direct 10m CAT6a, M - M Datasheet

Brand
Cables Direct
Model
10m CAT6a, M - M
Category
Networking cables
Type
Datasheet

This manual is also suitable for

Cables Direct 10m CAT6a, M - M

The Cables Direct 10m CAT6a, M - M is a high-performance Ethernet cable that supports data transfer speeds of up to 10 gigabits per second (Gbps). It is suitable for use in 10 Gigabit Ethernet networks, as well as with older network standards such as Gigabit Ethernet and Fast Ethernet. The cable is made of 4-pair, 26 AWG copper wire and features shielded twisted pair (S/FTP) construction, which helps to protect against electromagnetic interference (EMI).

The snagless connectors on the cable make it easy to plug and unplug, and the flush moulded strain relief helps to prevent the cable from being damaged when it is bent or pulled. The cable is also RoHS compliant, which means that it does not contain any hazardous materials.

Cables Direct 10m CAT6a, M - M

The Cables Direct 10m CAT6a, M - M is a high-performance Ethernet cable that supports data transfer speeds of up to 10 gigabits per second (Gbps). It is suitable for use in 10 Gigabit Ethernet networks, as well as with older network standards such as Gigabit Ethernet and Fast Ethernet. The cable is made of 4-pair, 26 AWG copper wire and features shielded twisted pair (S/FTP) construction, which helps to protect against electromagnetic interference (EMI).

The snagless connectors on the cable make it easy to plug and unplug, and the flush moulded strain relief helps to prevent the cable from being damaged when it is bent or pulled. The cable is also RoHS compliant, which means that it does not contain any hazardous materials.

CAT6A Patch Cable
Details correct on: 07/09/2012
Notification
Product Code ART-110K
Short Description Black, 10GBase-T, 26AWG, 600MHz, S/FTP, 10Mtr
Full Description
Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable
standard for 10 Gigabit Ethernet. The cable standard provides
performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-
TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and
10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with
previous standards such as Cat6, Cat5e and Cat5.
LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and
corrosive gas emitted during a fire.
Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than
Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data
rate of 10Gbits/s (billion bits per second).
S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each
individual pair is screened by foil and features an overall outer sheath.
This shielding protects the cable from EMI (Electro-Magnetic
Interference).
Snagless Connectors: The connectors feature a
“
bubble
”
which
protects the locking clip on the RJ45 from damage or being snapped off
during transport or installation.
Flush Moulded Strain Relief: The flush moulded design allows the
patch cables to be installed side by side in high-density network switches.
The strain relief allows the cables to move without damaging the cable or
breaking away from the connector while it is plugged in a device.
This product has been tested and found to comply with the applicable
electrical transmission characteristics specified in: ISO/IEC 11801 ED.2
and ANSI/TIA-568-C.2
IEC 60332-1-2, RoHS Compliant and 3P Verified
Available in 0.5, 1, 2, 3, 5 and 10 metre lengths
All lengths are available in grey, yellow, red, blue green and black.
Extra Information
Specification:
Black CAT6A cable
Injection moulded snagless connectors
Screened / Foil twisted pair
Low Smoke Zero Halogen
4x 26 AWG Copper
600MHz
RJ45 Shielded connector with 50
µ
Inch Gold Plate
10Mtr
www.CablesDirect.co.uk
  • Page 1 1

Cables Direct 10m CAT6a, M - M Datasheet

Brand
Cables Direct
Model
10m CAT6a, M - M
Category
Networking cables
Type
Datasheet
This manual is also suitable for

Cables Direct 10m CAT6a, M - M

The Cables Direct 10m CAT6a, M - M is a high-performance Ethernet cable that supports data transfer speeds of up to 10 gigabits per second (Gbps). It is suitable for use in 10 Gigabit Ethernet networks, as well as with older network standards such as Gigabit Ethernet and Fast Ethernet. The cable is made of 4-pair, 26 AWG copper wire and features shielded twisted pair (S/FTP) construction, which helps to protect against electromagnetic interference (EMI).

The snagless connectors on the cable make it easy to plug and unplug, and the flush moulded strain relief helps to prevent the cable from being damaged when it is bent or pulled. The cable is also RoHS compliant, which means that it does not contain any hazardous materials.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents