Asus VE276Q User manual

Brand: Asus

Model: VE276Q

Category: PC/workstation barebones

Type: User manual

Asus VE276Q is a top of the line LCD monitor, bringing you crisper, broader, and brighter display. Here is a quick rundown of the key features:

Incredible image quality: Enjoy stunning visuals with 1920x1080 resolution, 80,000,000:1 ASUS Smart Contrast Ratio, and 250cd/m2 brightness.
Wide viewing angles: 178° viewing angle both horizontally and vertically lets you enjoy beautiful visuals from almost any direction.
Versatile connectivity: Extensive connectivity options, including dual HDMI, DisplayPort, and D-sub ports, lets you connect to a wide range of devices.

Asus VE276Q is a top of the line LCD monitor, bringing you crisper, broader, and brighter display. Here is a quick rundown of the key features:

Incredible image quality: Enjoy stunning visuals with 1920x1080 resolution, 80,000,000:1 ASUS Smart Contrast Ratio, and 250cd/m2 brightness.
Wide viewing angles: 178° viewing angle both horizontally and vertically lets you enjoy beautiful visuals from almost any direction.
Versatile connectivity: Extensive connectivity options, including dual HDMI, DisplayPort, and D-sub ports, lets you connect to a wide range of devices.

VE276Q/VK276Q Series

LCD Monitor

User Guide

VE276Q

VK276Q

E5829 V1

April 2010

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

Table of contents

Notices ......................................................................................................... iii

Safety information ...................................................................................... iv

Care & Cleaning ........................................................................................... v

1.1 Welcome! ...................................................................................... 1-1

1.2 Package contents ......................................................................... 1-1

1.3 Assembling the monitor base ..................................................... 1-2

1.4 Connect cables ............................................................................. 1-2

1.5 Monitor introduction .................................................................... 1-3

1.5.1 Front of the LCD monitor ................................................ 1-3

1.5.2 Rear of the LCD monitor ................................................. 1-5

2.1 Detaching the arm/stand(for VESA wall mount) ....................... 2-1

2.2 Adjusting the monitor .................................................................. 2-2

2.3 Install LifeFrame 2 software ........................................................ 2-2

3.1 OSD (On-Screen Display) menu ................................................. 3-1

3.1.1 How to reconfigure .......................................................... 3-1

3.1.2 OSD Function Introduction .............................................. 3-1

3.2 Specications ............................................................................... 3-6

3.3 Troubleshooting (FAQ) ................................................................ 3-7

3.4 Supported Timing List ................................................................. 3-8

iii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

• Thisdevicemaynotcauseharmfulinterference,and

• Thisdevicemustacceptanyinterferencereceivedincluding

interferencethatmaycauseundesiredoperation.

Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfora

ClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimits

are designed to provide reasonable protection against harmful interference

inaresidentialinstallation.Thisequipmentgenerates,usesandcan

radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance

withmanufacturer’sinstructions,maycauseharmfulinterferencetoradio

communications.However,thereisnoguaranteethatinterferencewill

not occur in a particular installation. If this equipment does cause harmful

interferencetoradioortelevisionreception,whichcanbedeterminedby

turningtheequipmentoffandon,theuserisencouragedtotrytocorrect

theinterferencebyoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmenttoanoutletonacircuitdifferentfromthatto

which the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

AsanEnergyStar

Partner,ourcompanyhasdetermined

thatthisproductmeetstheEnergyStar

guidelines for

energyefficiency.

Canadian Department of Communications Statement

ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradio

noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

Safety information

• Beforesettingupthemonitor,carefullyreadallthedocumentationthat

came with the package.

• Topreventfireorshockhazard,neverexposethemonitortorainor

moisture.

• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltages

insidethemonitormayresultinseriousphysicalinjury.

• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contacta

qualifiedservicetechnicianoryourretailer.

• Beforeusingtheproduct,makesureallcablesarecorrectlyconnected

andthepowercablesarenotdamaged.Ifyoudetectanydamage,

contactyourdealerimmediately.

• Slotsandopeningsonthebackortopofthecabinetareprovidedfor

ventilation.Donotblocktheseslots.Neverplacethisproductnearor

over a radiator or heat source unless proper ventilation is provided.

• Themonitorshouldbeoperatedonlyfromthetypeofpowersource

indicatedonthelabel.Ifyouarenotsureofthetypeofpowersupplyto

yourhome,consultyourdealerorlocalpowercompany.

• Usetheappropriatepowerplugwhichcomplieswithyourlocalpower

standard.

• Donotoverloadpowerstripsandextentioncords.Overloadingcan

result in fire or electric shock.

• Avoiddust,humidity,andtemperatureextremes.Donotplacethe

monitorinanyareawhereitmaybecomewet.Placethemonitorona

stable surface.

• Unplugtheunitduringalightningstormorifitwillnotbeusedfora

long period of time. This will protect the monitor from damage due to

power surges.

• Neverpushobjectsorspillliquidofanykindintotheslotsonthe

monitor cabinet.

• Toensuresatisfactoryoperation,usethemonitoronlywithULlisted

computers which have appropriate configured receptacles marked

between 100-240V AC.

• Ifyouencountertechnicalproblemswiththemonitor,contacta

qualifiedservicetechnicianoryourretailer.

Care & Cleaning

• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables

and power cord. Follow the correct lifting techniques when positioning the

monitor.Whenliftingorcarryingthemonitor,grasptheedgesofthemonitor.

Donotliftthedisplaybythestandorthecord.

• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitor

surfacewithalint-free,non-abrasivecloth.Stubbornstainsmayberemoved

with a cloth dampened with mild cleaner.

• Avoidusingacleanercontainingalcoholoracetone.Useacleanerintended

forusewiththeLCD.Neverspraycleanerdirectlyonthescreen,asitmaydrip

inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent

light. Turn off the Power Switch and turn it on again to make sure that the

flicker disappears.

• Youmayfindslightlyunevenbrightnessonthescreendependingonthe

desktoppatternyouuse.

• Whenthesameimageisdisplayedforhours,anafterimageoftheprevious

screenmayremainafterswitchingtheimage.Thescreenwillrecoverslowlyor

youcanturnoffthePowerSwitchforhours.

• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contact

yourdealerorservicecentertofixit.Donotrepairthescreenbyyourself!

Conventions used in this guide

WARNING:Informationtopreventinjurytoyourselfwhentryingto

complete a task.

CAUTION:Informationtopreventdamagetothecomponentswhen

tryingtocompleteatask.

IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.

NOTE:Tipsandadditionalinformationtoaidincompletingatask.

Wheretondmoreinformation

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

TheASUSwebsitesworldwideprovideupdatedinformationonASUS

hardware and software products. Refer to http://www.asus.com

2. Optional documentation

Yourproductpackagemayincludeoptionaldocumentationthatmayhave

beenaddedbyyourdealer.Thesedocumentsarenotpartofthestandard

package.

1-1ASUSLCDMonitorVE276Q/VK276QSeries

1.1 Welcome!

ThankyouforpurchasingtheASUS

VE276Q/VK276QSeriesLCDmonitor!

ThelatestwidescreenLCDmonitorfromASUSprovidesacrisper,broader,and

brighterdisplay,plusahostoffeaturesthatenhanceyourviewingexperience.

Withthesefeatures,youcanenjoytheconvenienceanddelightfulvisualexperience

thattheVE276Q/VK276QSeriesbringsyou!

1.2 Package contents

CheckyourVE276Q/VK276QSeriesLCDpackageforthefollowingitems:

LCD monitor

Monitor base

1xCD

Quick start guide

1xPowercord

1xVGAcable

1xWebCamUSBcable(OnlyavailableformodelVK276Q)

1xDVIcable

1xAudiocable

Ifanyoftheaboveitemsisdamagedormissing,contactyourretailer

immediately.

1-2 Chapter 1: Product Introduction

1.3 Assembling the monitor base

To assemble the monitor base:

1. Attachthebasetothearmandfixwiththescrewtojointhemtightly.Youcan

easilytightenthescrewbyfingers.

2. Adjustthemonitortotheanglethatismostcomfortableforyou.

Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent

damage to the monitor.

Make sure to screw the base to the arm tightly.

1.4 Connect cables

To connect cables:

Connectthecablesyouneedbasedonchapter1.5.2,page1-5.

1-3ASUSLCDMonitorVE276Q/VK276QSeries

1.5 Monitor introduction

1.5.1 Front of the LCD monitor

2 3 4

6 7

1. Button:

Automaticallyadjusttheimagetoitsoptimizedposition,clock,and•

phasebylongpressingthisbuttonfor2-4seconds(forVGAmodeonly).

Usethishotkeytoswitchfromsixvideopresetmodes(SceneryMode,•

StandardMode,TheaterMode,GameMode,NightViewMode,and

sRGBMode)withSPLENDID™VideoEnhancementTechnology.

ExittheOSDmenuorgobacktothepreviousmenuastheOSDmenu•

is active.

2. Button:

Press this button to activate the Picture-in-picture function.•

Both the DVI and HDMI input source should not be selected as both the •

MainandPIPsourcesimultaneously.

3. Button:

Press this button to decrease the value of the function selected or move •

tothenextfuction.

ThisisalsoahotkeyforVolumeadjustment.•

4. MENUButton:

Press this button to enter the OSD menu.•

Pressthisbuttontoenter/selecttheicon(function)highlightedwhilethe•

OSD is activated.

1-4 Chapter 1: Product Introduction

5. Button:

Press this button to increase the value of the function selected or move •

right/uptothenextfunction.

ThisisalsoahotkeyforBrightnessadjustment.•

6. Input Select Button:

UsethishotkeytoswitchfromVGA,DVI,HDMIandDisplayPortinput•

signal.

Press (InputSelectbutton)todisplayHDMIsignals

afteryouconnectHDMIcablewiththemonitor.

7. PowerButton/PowerIndicator:

Pressthisbuttontoturnthemonitoron/off.•

The color definition of the power indicator is as the below table.•

Status Description

Blue ON

Amber Standbymode

OFF OFF

1-5ASUSLCDMonitorVE276Q/VK276QSeries

1.5.2 Rear of the LCD monitor

Screw Holes for

VESA Wall Mount

Rear connectors

2 3 4

1 AC-IN port

2 DisplayPort

3 HDMI-IN port

4 DVI port

5 VGA port

6 Audio Line-in port

7 Earphone-out port

8 USB-IN port (Only available for model VK276Q)

2-1 Chapter 2: Setup

2.1 Detaching the arm/stand

(for VESA wall mount)

ThedetachablestandoftheVE276Q/VK276QSeriesLCDmonitorisspecially

designed for VESA wall mount.

To detach the arm/stand:

1. Disconnectpowerandsignalcables.Carefullyput the front of the monitor

face down on a clean table.

2. Useascrewdrivertoremovethe two screws that secure the stand to the

monitor.

3. Detach the stand from the monitor.

• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent

damage to the monitor.

• Holdthestandofthemonitorwhileremovingthescrews.

TheVESAwallmountkit(100x100mm)ispurchasedseparately.•

UseonlytheULListedWallMountBracketwithminimumweight/load7.9•

Kg(Screwsize:4x12mm).

2-2ASUSLCDMonitorVE276Q/VK276QSeries

2.2 Adjusting the monitor

Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe•

monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.

Hold the stand to prevent the monitor from falling while changing its angle.•

Youcanadjustthemonitor’sanglefrom-5˚to20˚.•

-5 ~ 20

2.3 Install LifeFrame 2 software

ASUSVK276Qseriesprovidestheeasy-to-useLifeFrame 2 software that can work

withthewebcam,allowinguserstocreatetheirownphotosorvideoclips.

• TheLifeFrame 2softwarecurrentlysupportsMicrosoft

Windows

7/Vista/

XPServicePack2operatingsystems.

• TheLifeFrame 2 software is bundled in the support CD.

Installation instructions

1. Close all other applications.

2. Insert the support CD into the optical drive and run the LifeFrame 2 program.

3. Follow the on-screen instructions to complete the installation.

3-1 Chapter3:GeneralInstruction

3.1 OSD (On-Screen Display) menu

3.1.1 Howtorecongure

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB

PresstheMENUbuttontoactivatetheOSDmenu.1.

Press 2.



and



to navigate through the functions. Highlight and activate

thedesiredfunctionbypressingtheMENUbutton.Ifthefunctionselected

hasasub-menu,press



and



again to navigate through the sub-menu

functions.Highlightandactivatethedesiredsub-menufunctionbypressing

theMENUbutton.

Press 3.



and



to change the settings of the selected function.

ToexittheOSDmenu,pressthe4. button. Repeat step 2 and step 3 to

adjustanyotherfunction.

3.1.2 OSD Function Introduction

Spendid1.

Thisfunctioncontainssixsub-functionsthatyoucanselectforyour

preference.EachmodehastheResetselection,allowingyoutomaintain

yoursettingorreturntothepresetmode.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB

Scenery Mode•

:Thisisthebestchoiceforsceneryphotodisplayingwith

SPLENDID™VideoEnhancement.

3-2ASUSLCDMonitorVE276Q/VK276QSeries

Standard Mode•

: This is the best choice for document editing with

SPLENDID™VideoEnhancement.

Theater Mode•

: This is the best choice for movie watching with

SPLENDID™VideoEnhancement.

Game Mode•

:ThisisthebestchoiceforgameplayingwithSPLENDID™

Video Enhancement.

Night View Mode•

:Thisisthebestchoiceforplayingdark-scenegameor

watchingmoviewithSPLENDID™VideoEnhancement.

In the • Standard Mode and sRGB,theSaturation,Color Temp.,Skin

Tone,Sharpness,andASCR functions are not user-configurable.

2. Color

Selecttheimagecoloryoulikefromthisfunction.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Brightness

Contrast

Saturation

Color Temp

User Mode

Skin Tone

Brightness• : The adjusting range is from 0 to 100. The button is also a

hotkeytoactivatethisfunction.

Contrast• : The adjusting range is from 0 to 100.

Saturation• : The adjusting range is from 0 to 100.

Color Temp.•

:Containsthreepresetcolormodes(Cool,Normal,Warm)

andoneUserMode.

Skin Tone•

:ContainsthreecolormodesincludingReddish,Natural,and

Yellowish.

IntheUserMode,colorsofR(Red),G(Green),andB(Blue)are

userconfigurable; the adjusting range is from 0 ~ 100.

3-3 Chapter3:GeneralInstruction

3. Image

YoucanadjusttheimageSharpness,TraceFree,AspectControl,Position

(VGAonly),andFocus(VGAonly)fromthismainfunction.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Focus

Sharpness

Trace Free

Aspect Control

ASCR

Full

Position

Sharpness• : Asjusts the picture sharpness. The adjusting range is from 0

to 100.

Trace Free• : SpeedsuptheresponsetimebyOverDrivetechnology.The

adjusting range is from lower 0 to faster 100.

Aspect Control• :Adjuststheaspectratioto“Full”,“4:3”,“1:1”,or“Over

Scan”(OnlyavailableforHDMIinput).

ASCR• :SelectYESorNOtoenableordisabledynamiccontrastratio

function.

Position• :Adjuststhehorizontalpostition(H-Position)andthevertical

position(V-Position)oftheimage.Theadjustingrangeisfrom0to100

(OnlyavailableforVGAinput).

Focus• :ReducesHorizonal-linenoiseandVertical-linenoiseoftheimage

byadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom

0to100(OnlyavailableforVGAinput).

4. Sound

Adjuststhesoundsettingstoyourpreference.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Volume

Bass

Treble

Balance

OFFMute

3-4ASUSLCDMonitorVE276Q/VK276QSeries

Volume• : Adjusts the output volume level. The buttonisalsoahotkey

to activate this function.

Bass• : Adjusts the output bass level.

Treble• : Adjuststhe output treble level.

Balance• : Adjusts the balance between the left and right front speakers.

Mute• : Mutes the output volume.

5. PIP Setings

ThePIPSettingsallowsyoutoopenupanothersub-windowconnected

fromanothervideosourcebesidesthemain-windowfromyouroriginal

videosource.Byactivatingthisfunction,youcanhavetwopicturesfromtwo

diferentvideosourcesdisplayedbyonemonitor.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

PIP Mode

PIP Source

Size

Position

OFF

Swap

PIP Mode• : Turns the PIP function on or off.

PIP Source• :SelectsthevideoinputsourcefromVGA,DVI,HDMI,or

DisplayPortconnector.

Size• :AdjuststhePIPsize.Theoptionsare:Small,Middle,orLarge.

Position• : Adjusts the PIP postion in the main-window. The options are:

Right-Top,Left-Top,Right-Bottom,orLeft-Bottom.

SWAP• : Swaps the source of the main and sub-window.

Both the DVI and HDMI input sources should not be selected each for

theMainandPIPsourcesimultaneously.

Main-Channel

Sub-Channel

VGA DVI HDMI DisplayPort

VGA • • •

DVI • X •

HDMI • X •

DisplayPort • • •

3-5 Chapter3:GeneralInstruction

6. Input Select

Select the input source from

VGA

,

DVI

,

HDMI

,or

DisplayPort

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

VGA

DVI

HDMI

DisplayPort

7. System Setup

Adjuststhesystemconfiguration.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Language

All Reset

Splendid Demo Mode OFF

OFF

English

AI Light

OSD Setup

Information

Splendid Demo Mode•

: Activate the demo mode for the Splendid

function.

AI Light•

:Automaticallyadjustthescreenbacklightaccordingto

the surroundings. The monitor backlight will turn brighter in a bright

surroundings,orturndarkerinadarksurroundings.Asthelightsensoris

locatedonthetopofthemonitor,donotblockthesensingarea.

OSD Setup• :Adjuststhehorizontalpostition(H-Position),verticalposition

(V-Position),OSDTimeout,DDD/CI,andTransparencyoftheOSD

screen.

Information• :Displaysthemonitorinformation.

Language• :SelectsOSDlanguage.TheselectionsareEnglish,French,

German,Spanish,Italian,Dutch,Russian,TraditionalChinese,Simplified

Chinese,andJapanese.

All Reset•

:Setto“Yes”torevertallsettingstothefactorydefaultmode.

3-6ASUSLCDMonitorVE276Q/VK276QSeries

3.2 Specications

Model VE276Q VK276Q

PanelSize

27.0”W(68.6cm) 27.0”W(68.6cm)

Max.Resolution 1920x1080 1920x1080

Brightness(Max.) ≧300cd/㎡ ≧300cd/㎡

IntrisincContrastRatio(Max.) ≧1000:1 ≧1000:1

ViewingAngle(CR=10) ≧160°(V);≧170°(H) ≧160°(V);≧170°(H)

DisplayColors 16.7M(6bitHiFRC) 16.7M(6bitHiFRC)

Response Time

2ms(GraytoGray) 2ms(GraytoGray)

Webcam(built-in) - 2.0M

Satellite Speaker 3Wx2stereo 3Wx2stereo

Earphone Output

Yes Yes

Sound from HDMI Yes Yes

HDMI input Yes Yes

DVI input DVI with HDCP DVI with HDCP

D-Sub input Yes Yes

DisplayPortinput

Yes Yes

Audio Line-in Yes Yes

PowerONConsumption 75W 75W

Tilt

-5° ~ +20° -5° ~ +20°

VESA Wall Mounting Yes(100mmx100mm) Yes(100mmx100mm)

Phys.Dimension(WxHxD) 643x445.6x220 643x459.6x220

BoxDimension(WxHxD) 732x560x176 732x560x176

NetWeight(Esti.) 7.2 kg 7.2 kg

GrossWeight(Esti.) 10.5 kg 10.5 kg

Voltage Rating AC100~240V(Built-in) AC100~240V(Built-in)

*Specicationsaresubjecttochangewithoutnotice.

3-7 Chapter3:GeneralInstruction

3.3 Troubleshooting (FAQ)

Problem Possible Solution

PowerLEDisnotON

Press the • button to check if the monitor is in the

ONmode.

Checkifthepowercordisproperlyconnectedtothe•

monitor and the power outlet.

The power LED lights amber and

there is no screen image

Check if the monitor and the computer are in the •

ONmode.

Makesurethesignalcableisproperlyconnected•

the monitor and the computer.

Inspect the signal cable and make sure none of the •

pins are bent.

Connect the computer with another available •

monitortocheckifthecomputerisproperlyworking.

Screen image is too light or dark Adjust the Contrast and Brightness settings via •

OSD.

Screen image is not centered or

sizedproperly

Press the • button for two seconds to

automaticallyadjusttheimage.

Adjust the H-Position or V-Position settings via •

OSD.

Screen image bounces or a wave

pattern is present in the image

Makesurethesignalcableisproperlyconnectedto•

the monitor and the computer.

Moveelectricaldevicesthatmaycauseelectrical•

interference.

Screen image has color defects

(whitedoesnotlookwhite)

Inspect the signal cable and make sure that none of •

the pins are bent.

Perform Reset via OSD.•

AdjusttheR/G/BcolorsettingsorselecttheColor•

Temperature via OSD.

Screenimageisblurryorfuzzy

Press the • button for two seconds to

automaticallyadjusttheimage(forVGAmodeonly).

Adjust the Phase and Clock settings via OSD.•

Nosoundorsoundislow Ensurethattheaudiocableisproperlyconnectedto•

the monitor and the computer.

Adjustthevolumesettingsofbothyourmonitorand•

computer.

Ensure that the computer sound card driver is •

properlyinstalledandactivated.

Webcam is not working MakesurethatyouhaveconnectedtheUSB2.0•

cablesecurelytoboththeLCDmonitorandyour

computer.

MakesurethatyouusetheMicrosoftWindows•

Vista/XPServicePack2operationsystems.

Page is loading ...

Asus VE276Q User manual

Brand: Asus

Model: VE276Q

Category: PC/workstation barebones

Type: User manual

Asus VE276Q is a top of the line LCD monitor, bringing you crisper, broader, and brighter display. Here is a quick rundown of the key features:

Incredible image quality: Enjoy stunning visuals with 1920x1080 resolution, 80,000,000:1 ASUS Smart Contrast Ratio, and 250cd/m2 brightness.
Wide viewing angles: 178° viewing angle both horizontally and vertically lets you enjoy beautiful visuals from almost any direction.
Versatile connectivity: Extensive connectivity options, including dual HDMI, DisplayPort, and D-sub ports, lets you connect to a wide range of devices.

Download PDF

report

Asus VE276Q User manual

Asus VE276Q User manual

Related papers

Other documents