Asus VE276Q User manual

Asus
Brand
Asus
Model
VE276Q
Category
PC/workstation barebones
Type
User manual

Asus VE276Q is a top of the line LCD monitor, bringing you crisper, broader, and brighter display. Here is a quick rundown of the key features:

  • Incredible image quality: Enjoy stunning visuals with 1920x1080 resolution, 80,000,000:1 ASUS Smart Contrast Ratio, and 250cd/m2 brightness.
  • Wide viewing angles: 178° viewing angle both horizontally and vertically lets you enjoy beautiful visuals from almost any direction.
  • Versatile connectivity: Extensive connectivity options, including dual HDMI, DisplayPort, and D-sub ports, lets you connect to a wide range of devices.

Asus VE276Q is a top of the line LCD monitor, bringing you crisper, broader, and brighter display. Here is a quick rundown of the key features:

  • Incredible image quality: Enjoy stunning visuals with 1920x1080 resolution, 80,000,000:1 ASUS Smart Contrast Ratio, and 250cd/m2 brightness.
  • Wide viewing angles: 178° viewing angle both horizontally and vertically lets you enjoy beautiful visuals from almost any direction.
  • Versatile connectivity: Extensive connectivity options, including dual HDMI, DisplayPort, and D-sub ports, lets you connect to a wide range of devices.
VE276Q/VK276Q Series
LCD Monitor
User Guide
VE276Q
VK276Q
E5829 V1
April 2010
ii
Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Table of contents
Notices ......................................................................................................... iii
Safety information ...................................................................................... iv
Care & Cleaning ........................................................................................... v
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Assembling the monitor base ..................................................... 1-2
1.4 Connect cables ............................................................................. 1-2
1.5 Monitor introduction .................................................................... 1-3
1.5.1 Front of the LCD monitor ................................................ 1-3
1.5.2 Rear of the LCD monitor ................................................. 1-5
2.1 Detaching the arm/stand(for VESA wall mount) ....................... 2-1
2.2 Adjusting the monitor .................................................................. 2-2
2.3 Install LifeFrame 2 software ........................................................ 2-2
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure .......................................................... 3-1
3.1.2 OSD Function Introduction .............................................. 3-1
3.2 Specications ............................................................................... 3-6
3.3 Troubleshooting (FAQ) ................................................................ 3-7
3.4 Supported Timing List ................................................................. 3-8
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• Thisdevicemaynotcauseharmfulinterference,and
• Thisdevicemustacceptanyinterferencereceivedincluding
interferencethatmaycauseundesiredoperation.
Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfora
ClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimits
are designed to provide reasonable protection against harmful interference
inaresidentialinstallation.Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance
withmanufacturer’sinstructions,maycauseharmfulinterferencetoradio
communications.However,thereisnoguaranteethatinterferencewill
not occur in a particular installation. If this equipment does cause harmful
interferencetoradioortelevisionreception,whichcanbedeterminedby
turningtheequipmentoffandon,theuserisencouragedtotrytocorrect
theinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdifferentfromthatto
which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
AsanEnergyStar
®
Partner,ourcompanyhasdetermined
thatthisproductmeetstheEnergyStar
®
guidelines for
energyefficiency.
Canadian Department of Communications Statement
ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
Safety information
• Beforesettingupthemonitor,carefullyreadallthedocumentationthat
came with the package.
• Topreventfireorshockhazard,neverexposethemonitortorainor
moisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltages
insidethemonitormayresultinseriousphysicalinjury.
• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contacta
qualifiedservicetechnicianoryourretailer.
• Beforeusingtheproduct,makesureallcablesarecorrectlyconnected
andthepowercablesarenotdamaged.Ifyoudetectanydamage,
contactyourdealerimmediately.
• Slotsandopeningsonthebackortopofthecabinetareprovidedfor
ventilation.Donotblocktheseslots.Neverplacethisproductnearor
over a radiator or heat source unless proper ventilation is provided.
• Themonitorshouldbeoperatedonlyfromthetypeofpowersource
indicatedonthelabel.Ifyouarenotsureofthetypeofpowersupplyto
yourhome,consultyourdealerorlocalpowercompany.
• Usetheappropriatepowerplugwhichcomplieswithyourlocalpower
standard.
• Donotoverloadpowerstripsandextentioncords.Overloadingcan
result in fire or electric shock.
• Avoiddust,humidity,andtemperatureextremes.Donotplacethe
monitorinanyareawhereitmaybecomewet.Placethemonitorona
stable surface.
• Unplugtheunitduringalightningstormorifitwillnotbeusedfora
long period of time. This will protect the monitor from damage due to
power surges.
• Neverpushobjectsorspillliquidofanykindintotheslotsonthe
monitor cabinet.
• Toensuresatisfactoryoperation,usethemonitoronlywithULlisted
computers which have appropriate configured receptacles marked
between 100-240V AC.
• Ifyouencountertechnicalproblemswiththemonitor,contacta
qualifiedservicetechnicianoryourretailer.
v
Care & Cleaning
• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables
and power cord. Follow the correct lifting techniques when positioning the
monitor.Whenliftingorcarryingthemonitor,grasptheedgesofthemonitor.
Donotliftthedisplaybythestandorthecord.
• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitor
surfacewithalint-free,non-abrasivecloth.Stubbornstainsmayberemoved
with a cloth dampened with mild cleaner.
• Avoidusingacleanercontainingalcoholoracetone.Useacleanerintended
forusewiththeLCD.Neverspraycleanerdirectlyonthescreen,asitmaydrip
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
• Youmayfindslightlyunevenbrightnessonthescreendependingonthe
desktoppatternyouuse.
• Whenthesameimageisdisplayedforhours,anafterimageoftheprevious
screenmayremainafterswitchingtheimage.Thescreenwillrecoverslowlyor
youcanturnoffthePowerSwitchforhours.
• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contact
yourdealerorservicecentertofixit.Donotrepairthescreenbyyourself!
Conventions used in this guide
WARNING:Informationtopreventinjurytoyourselfwhentryingto
complete a task.
CAUTION:Informationtopreventdamagetothecomponentswhen
tryingtocompleteatask.
IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.
NOTE:Tipsandadditionalinformationtoaidincompletingatask.
vi
Wheretondmoreinformation
Refer to the following sources for additional information and for product and
software updates.
1. ASUS websites
TheASUSwebsitesworldwideprovideupdatedinformationonASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Yourproductpackagemayincludeoptionaldocumentationthatmayhave
beenaddedbyyourdealer.Thesedocumentsarenotpartofthestandard
package.
1-1ASUSLCDMonitorVE276Q/VK276QSeries
1.1 Welcome!
ThankyouforpurchasingtheASUS
®
VE276Q/VK276QSeriesLCDmonitor!
ThelatestwidescreenLCDmonitorfromASUSprovidesacrisper,broader,and
brighterdisplay,plusahostoffeaturesthatenhanceyourviewingexperience.
Withthesefeatures,youcanenjoytheconvenienceanddelightfulvisualexperience
thattheVE276Q/VK276QSeriesbringsyou!
1.2 Package contents
CheckyourVE276Q/VK276QSeriesLCDpackageforthefollowingitems:
LCD monitor
Monitor base
1xCD
Quick start guide
1xPowercord
1xVGAcable
1xWebCamUSBcable(OnlyavailableformodelVK276Q)
1xDVIcable
1xAudiocable
Ifanyoftheaboveitemsisdamagedormissing,contactyourretailer
immediately.
1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor base
To assemble the monitor base:
1. Attachthebasetothearmandfixwiththescrewtojointhemtightly.Youcan
easilytightenthescrewbyfingers.
2. Adjustthemonitortotheanglethatismostcomfortableforyou.
Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damage to the monitor.
1
2
Make sure to screw the base to the arm tightly.
1.4 Connect cables
To connect cables:
Connectthecablesyouneedbasedonchapter1.5.2,page1-5.
1-3ASUSLCDMonitorVE276Q/VK276QSeries
1.5 Monitor introduction
1.5.1 Front of the LCD monitor
1
2 3 4
5
6 7
1. Button:
Automaticallyadjusttheimagetoitsoptimizedposition,clock,and•
phasebylongpressingthisbuttonfor2-4seconds(forVGAmodeonly).
Usethishotkeytoswitchfromsixvideopresetmodes(SceneryMode,•
StandardMode,TheaterMode,GameMode,NightViewMode,and
sRGBMode)withSPLENDID™VideoEnhancementTechnology.
ExittheOSDmenuorgobacktothepreviousmenuastheOSDmenu•
is active.
2. Button:
Press this button to activate the Picture-in-picture function.•
Both the DVI and HDMI input source should not be selected as both the •
MainandPIPsourcesimultaneously.
3. Button:
Press this button to decrease the value of the function selected or move •
tothenextfuction.
ThisisalsoahotkeyforVolumeadjustment.•
4. MENUButton:
Press this button to enter the OSD menu.•
Pressthisbuttontoenter/selecttheicon(function)highlightedwhilethe•
OSD is activated.
1-4 Chapter 1: Product Introduction
5. Button:
Press this button to increase the value of the function selected or move •
right/uptothenextfunction.
ThisisalsoahotkeyforBrightnessadjustment.•
6. Input Select Button:
UsethishotkeytoswitchfromVGA,DVI,HDMIandDisplayPortinput•
signal.
Press (InputSelectbutton)todisplayHDMIsignals
afteryouconnectHDMIcablewiththemonitor.
7. PowerButton/PowerIndicator:
Pressthisbuttontoturnthemonitoron/off.•
The color definition of the power indicator is as the below table.•
Status Description
Blue ON
Amber Standbymode
OFF OFF
1-5ASUSLCDMonitorVE276Q/VK276QSeries
1.5.2 Rear of the LCD monitor
Screw Holes for
VESA Wall Mount
Rear connectors
1
2 3 4
5
6
7
8
1 AC-IN port
2 DisplayPort
3 HDMI-IN port
4 DVI port
5 VGA port
6 Audio Line-in port
7 Earphone-out port
8 USB-IN port (Only available for model VK276Q)
2-1 Chapter 2: Setup
2.1 Detaching the arm/stand
(for VESA wall mount)
ThedetachablestandoftheVE276Q/VK276QSeriesLCDmonitorisspecially
designed for VESA wall mount.
To detach the arm/stand:
1. Disconnectpowerandsignalcables.Carefullyput the front of the monitor
face down on a clean table.
2. Useascrewdrivertoremovethe two screws that secure the stand to the
monitor.
3. Detach the stand from the monitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damage to the monitor.
• Holdthestandofthemonitorwhileremovingthescrews.
TheVESAwallmountkit(100x100mm)ispurchasedseparately.•
UseonlytheULListedWallMountBracketwithminimumweight/load7.9•
Kg(Screwsize:4x12mm).
2-2ASUSLCDMonitorVE276Q/VK276QSeries
2.2 Adjusting the monitor
Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe•
monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.
Hold the stand to prevent the monitor from falling while changing its angle.•
Youcanadjustthemonitor’sanglefrom-5˚to20˚.•
-5 ~ 20
2.3 Install LifeFrame 2 software
ASUSVK276Qseriesprovidestheeasy-to-useLifeFrame 2 software that can work
withthewebcam,allowinguserstocreatetheirownphotosorvideoclips.
• TheLifeFrame 2softwarecurrentlysupportsMicrosoft
®
Windows
®
7/Vista/
XPServicePack2operatingsystems.
• TheLifeFrame 2 software is bundled in the support CD.
Installation instructions
1. Close all other applications.
2. Insert the support CD into the optical drive and run the LifeFrame 2 program.
3. Follow the on-screen instructions to complete the installation.
3-1 Chapter3:GeneralInstruction
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB
PresstheMENUbuttontoactivatetheOSDmenu.1.
Press 2.
and
to navigate through the functions. Highlight and activate
thedesiredfunctionbypressingtheMENUbutton.Ifthefunctionselected
hasasub-menu,press
and
again to navigate through the sub-menu
functions.Highlightandactivatethedesiredsub-menufunctionbypressing
theMENUbutton.
Press 3.
and
to change the settings of the selected function.
ToexittheOSDmenu,pressthe4. button. Repeat step 2 and step 3 to
adjustanyotherfunction.
3.1.2 OSD Function Introduction
Spendid1.
Thisfunctioncontainssixsub-functionsthatyoucanselectforyour
preference.EachmodehastheResetselection,allowingyoutomaintain
yoursettingorreturntothepresetmode.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB
Scenery Mode•
:Thisisthebestchoiceforsceneryphotodisplayingwith
SPLENDID™VideoEnhancement.
3-2ASUSLCDMonitorVE276Q/VK276QSeries
Standard Mode•
: This is the best choice for document editing with
SPLENDID™VideoEnhancement.
Theater Mode•
: This is the best choice for movie watching with
SPLENDID™VideoEnhancement.
Game Mode•
:ThisisthebestchoiceforgameplayingwithSPLENDID™
Video Enhancement.
Night View Mode•
:Thisisthebestchoiceforplayingdark-scenegameor
watchingmoviewithSPLENDID™VideoEnhancement.
In the • Standard Mode and sRGB,theSaturation,Color Temp.,Skin
Tone,Sharpness,andASCR functions are not user-configurable.
2. Color
Selecttheimagecoloryoulikefromthisfunction.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Brightness
Contrast
Saturation
Color Temp
90
80
User Mode
Skin Tone
Brightness• : The adjusting range is from 0 to 100. The button is also a
hotkeytoactivatethisfunction.
Contrast• : The adjusting range is from 0 to 100.
Saturation• : The adjusting range is from 0 to 100.
Color Temp.•
:Containsthreepresetcolormodes(Cool,Normal,Warm)
andoneUserMode.
Skin Tone•
:ContainsthreecolormodesincludingReddish,Natural,and
Yellowish.
IntheUserMode,colorsofR(Red),G(Green),andB(Blue)are
userconfigurable; the adjusting range is from 0 ~ 100.
3-3 Chapter3:GeneralInstruction
3. Image
YoucanadjusttheimageSharpness,TraceFree,AspectControl,Position
(VGAonly),andFocus(VGAonly)fromthismainfunction.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Focus
Sharpness
Trace Free
Aspect Control
ASCR
50
0
Full
Position
Sharpness• : Asjusts the picture sharpness. The adjusting range is from 0
to 100.
Trace Free• : SpeedsuptheresponsetimebyOverDrivetechnology.The
adjusting range is from lower 0 to faster 100.
Aspect Control• :Adjuststheaspectratioto“Full”,“4:3”,“1:1”,or“Over
Scan”(OnlyavailableforHDMIinput).
ASCR• :SelectYESorNOtoenableordisabledynamiccontrastratio
function.
Position• :Adjuststhehorizontalpostition(H-Position)andthevertical
position(V-Position)oftheimage.Theadjustingrangeisfrom0to100
(OnlyavailableforVGAinput).
Focus• :ReducesHorizonal-linenoiseandVertical-linenoiseoftheimage
byadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom
0to100(OnlyavailableforVGAinput).
4. Sound
Adjuststhesoundsettingstoyourpreference.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Volume
Bass
Treble
Balance
50
50
50
50
OFFMute
3-4ASUSLCDMonitorVE276Q/VK276QSeries
Volume• : Adjusts the output volume level. The buttonisalsoahotkey
to activate this function.
Bass• : Adjusts the output bass level.
Treble• : Adjuststhe output treble level.
Balance• : Adjusts the balance between the left and right front speakers.
Mute• : Mutes the output volume.
5. PIP Setings
ThePIPSettingsallowsyoutoopenupanothersub-windowconnected
fromanothervideosourcebesidesthemain-windowfromyouroriginal
videosource.Byactivatingthisfunction,youcanhavetwopicturesfromtwo
diferentvideosourcesdisplayedbyonemonitor.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
PIP Mode
PIP Source
Size
Position
OFF
Swap
PIP Mode• : Turns the PIP function on or off.
PIP Source• :SelectsthevideoinputsourcefromVGA,DVI,HDMI,or
DisplayPortconnector.
Size• :AdjuststhePIPsize.Theoptionsare:Small,Middle,orLarge.
Position• : Adjusts the PIP postion in the main-window. The options are:
Right-Top,Left-Top,Right-Bottom,orLeft-Bottom.
SWAP• : Swaps the source of the main and sub-window.
Both the DVI and HDMI input sources should not be selected each for
theMainandPIPsourcesimultaneously.
Main-Channel
Sub-Channel
VGA DVI HDMI DisplayPort
VGA • • •
DVI • X •
HDMI • X •
DisplayPort • • •
3-5 Chapter3:GeneralInstruction
6. Input Select
Select the input source from
VGA
,
DVI
,
HDMI
,or
DisplayPort
.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
VGA
DVI
HDMI
DisplayPort
7. System Setup
Adjuststhesystemconfiguration.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Language
All Reset
Splendid Demo Mode OFF
OFF
English
AI Light
OSD Setup
Information
Splendid Demo Mode•
: Activate the demo mode for the Splendid
function.
AI Light•
:Automaticallyadjustthescreenbacklightaccordingto
the surroundings. The monitor backlight will turn brighter in a bright
surroundings,orturndarkerinadarksurroundings.Asthelightsensoris
locatedonthetopofthemonitor,donotblockthesensingarea.
OSD Setup• :Adjuststhehorizontalpostition(H-Position),verticalposition
(V-Position),OSDTimeout,DDD/CI,andTransparencyoftheOSD
screen.
Information• :Displaysthemonitorinformation.
Language• :SelectsOSDlanguage.TheselectionsareEnglish,French,
German,Spanish,Italian,Dutch,Russian,TraditionalChinese,Simplified
Chinese,andJapanese.
All Reset•
:Setto“Yes”torevertallsettingstothefactorydefaultmode.
3-6ASUSLCDMonitorVE276Q/VK276QSeries
3.2 Specications
Model VE276Q VK276Q
PanelSize
27.0”W(68.6cm) 27.0”W(68.6cm)
Max.Resolution 1920x1080 1920x1080
Brightness(Max.) ≧300cd/㎡ ≧300cd/㎡
IntrisincContrastRatio(Max.) ≧1000:1 ≧1000:1
ViewingAngle(CR=10) ≧160°(V);≧170°(H) ≧160°(V);≧170°(H)
DisplayColors 16.7M(6bitHiFRC) 16.7M(6bitHiFRC)
Response Time
2ms(GraytoGray) 2ms(GraytoGray)
Webcam(built-in) - 2.0M
Satellite Speaker 3Wx2stereo 3Wx2stereo
Earphone Output
Yes Yes
Sound from HDMI Yes Yes
HDMI input Yes Yes
DVI input DVI with HDCP DVI with HDCP
D-Sub input Yes Yes
DisplayPortinput
Yes Yes
Audio Line-in Yes Yes
PowerONConsumption 75W 75W
Tilt
-5° ~ +20° -5° ~ +20°
VESA Wall Mounting Yes(100mmx100mm) Yes(100mmx100mm)
Phys.Dimension(WxHxD) 643x445.6x220 643x459.6x220
BoxDimension(WxHxD) 732x560x176 732x560x176
NetWeight(Esti.) 7.2 kg 7.2 kg
GrossWeight(Esti.) 10.5 kg 10.5 kg
Voltage Rating AC100~240V(Built-in) AC100~240V(Built-in)
*Specicationsaresubjecttochangewithoutnotice.
3-7 Chapter3:GeneralInstruction
3.3 Troubleshooting (FAQ)
Problem Possible Solution
PowerLEDisnotON
Press the • button to check if the monitor is in the
ONmode.
Checkifthepowercordisproperlyconnectedtothe•
monitor and the power outlet.
The power LED lights amber and
there is no screen image
Check if the monitor and the computer are in the •
ONmode.
Makesurethesignalcableisproperlyconnected•
the monitor and the computer.
Inspect the signal cable and make sure none of the •
pins are bent.
Connect the computer with another available •
monitortocheckifthecomputerisproperlyworking.
Screen image is too light or dark Adjust the Contrast and Brightness settings via •
OSD.
Screen image is not centered or
sizedproperly
Press the • button for two seconds to
automaticallyadjusttheimage.
Adjust the H-Position or V-Position settings via •
OSD.
Screen image bounces or a wave
pattern is present in the image
Makesurethesignalcableisproperlyconnectedto•
the monitor and the computer.
Moveelectricaldevicesthatmaycauseelectrical•
interference.
Screen image has color defects
(whitedoesnotlookwhite)
Inspect the signal cable and make sure that none of •
the pins are bent.
Perform Reset via OSD.•
AdjusttheR/G/BcolorsettingsorselecttheColor•
Temperature via OSD.
Screenimageisblurryorfuzzy
Press the • button for two seconds to
automaticallyadjusttheimage(forVGAmodeonly).
Adjust the Phase and Clock settings via OSD.•
Nosoundorsoundislow Ensurethattheaudiocableisproperlyconnectedto•
the monitor and the computer.
Adjustthevolumesettingsofbothyourmonitorand•
computer.
Ensure that the computer sound card driver is •
properlyinstalledandactivated.
Webcam is not working MakesurethatyouhaveconnectedtheUSB2.0•
cablesecurelytoboththeLCDmonitorandyour
computer.
MakesurethatyouusetheMicrosoftWindows•
Vista/XPServicePack2operationsystems.
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Asus VE276Q User manual

Asus
Brand
Asus
Model
VE276Q
Category
PC/workstation barebones
Type
User manual

Asus VE276Q is a top of the line LCD monitor, bringing you crisper, broader, and brighter display. Here is a quick rundown of the key features:

  • Incredible image quality: Enjoy stunning visuals with 1920x1080 resolution, 80,000,000:1 ASUS Smart Contrast Ratio, and 250cd/m2 brightness.
  • Wide viewing angles: 178° viewing angle both horizontally and vertically lets you enjoy beautiful visuals from almost any direction.
  • Versatile connectivity: Extensive connectivity options, including dual HDMI, DisplayPort, and D-sub ports, lets you connect to a wide range of devices.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents