Gigabyte GA-6VX7-4X Owner's manual

FCC Compliance Statement:

This equipment has been tested and found to

comply with limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable

protection against harmful interference in

residential installations. This equipment

generates, uses, and can radiate radio

frequency energy, and if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause interference to radio or

television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to which

the receiver is connected

-Consult the dealer or an experienced radio/television technician for

additional suggestions

You are cautioned that any change or modifications to the equipment not

expressly approve by the party responsible for compliance could void Your

authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to

the following two conditions 1) this device may not cause harmful interference

and 2) this device must accept any interference received, including interference

that may cause undesired operation.

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name: G.B.T. INC.

Address: 18305 Valley Blvd., Suite#A

LA Puent, CA 91744

Phone/Fax No: (818) 854-9338/ (818) 854-9339

hereby declares that the product

Product Name:

Model Number:

Mother Board

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),

Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful

and (2) this device must accept any inference received, including

that may cause undesired operation.

Representative Person's Name: ERIC LU

Signature:

Date: Jan. 14, 2000

Eric Lu

GA-6VX7-4X

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-6VX7-4X

is in conformity with

(reference to the specification under which conformity is declared)

in accordance with 89/336 EEC-EMC Directive

EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused

of radio disturbance characteristics of EN60555-2 by household appliances and similar

industrial, scientific and medical (ISM electrical equipment “Harmonics”

high frequency equipment

EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused

of radio disturbance characteristics of EN60555-3 by household appliances and similar

broadcast receivers and associated electrical equipment “Voltage fluctuations”

equipment

EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:

of radio disturbance characteristics of Residual, commercial and light industry

household electrical appliances,

portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:

apparatus Residual, commercial and light industry

EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:

of radio disturbance characteristics of Industrial environment

fluorescent lamps and luminaries

EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:

broadcast receivers and associated Industrial environment

equipment

EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household

of radio disturbance characteristics of appliances tools and similar apparatus

information technology equipment

DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible

part 10 for receiving and/or distribution from power systems (UPS)

part 12 sound and television signals

CE marking (EC conformity marking)

The manufacturer also declares the conformity of above mentioned product

with the actual required safety standards in accordance with LVD 73/23 EEC

EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment

electronic and related apparatus for including electrical business equipment

household and similar general use

EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for

electrical appliances uninterruptible power systems (UPS)

Manufacturer/Importer

Signature : Rex Lin

(Stamp) Date: Jan.14, 2000 Name : Rex Lin

6VX7-4X

Socket 370 Processor Motherboard

USER'S MANUAL

Socket 370 Processor Motherboard

REV. 3.2 First Edition

R-32-01-000712

How This Manual Is Organized

This manual is divided into the following sections:

1) Revision History Manual revision information

2) Item Checklist Product item list

3) Features Product information & specification

4) Hardware Setup Instructions on setting up the motherboard

5) Performance & Block Diagram Product performance & block diagram

6) Suspend to RAM Instructions STR installation

7) BIOS Setup Instructions on setting up the BIOS

software

8) Appendix General reference

Table Of Content

Revision History P.1

Item Checklist P.2

Summary of Features P.3

6VX7-4X Motherboard Layout P.5

Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition P.6

Performance List P.34

Block Diagram P.35

Suspend to RAM Installation P.36

Memory Installation P.42

Page Index for BIOS Setup P.43

Appendix P.72

6VX7-4X Motherboard

1

Revision History

Revision

Revision Note Date

3.2 Initial release of the 6VX7-4X motherboard user’s manual.

Jul.2000

The author assumes no responsibility for any errors or omissions that may appear in this

document nor does the author make a commitment to update the information contained herein.

Third-party brands and names are the property of their respective owners.

Jul. 12, 2000 Taipei, Taiwan, R.O.C

Item Checklist

2

Item Checklist

þThe 6VX7-4X motherboard

þCable for IDE / floppy device

þDiskettes or CD (TUCD) for motherboard driver & utility

oInternal COM B Cable (Optional)

oInternal USB Cable (Optional)

oCable for SCSI device

þ6VX7-4X user’s manual

6VX7-4X Motherboard

3

Summary Of Features

Form Factor Ÿ 30.4 cm x 20.3 cm ATX Size form factor, 4 layers PCB.

CPU Ÿ Socket 370 processor

Intel Pentium!!! 100/133MHz FSB, FC-PGA

Intel CeleronTM 66MHz FSB, FC-PGA

VIA Cyrix III 100/133MHz FSB, PPGA

Ÿ 2nd cache in CPU (Depend on CPU)

Chipset Ÿ VT82C694X (VIA Apollo Pro 133A)

Ÿ VT82C686A

Clock Generator Ÿ ICS 9248DF-39

Ÿ 66/100/133 MHz system bus speeds (PCI 33MHz)

Ÿ 75/83/112/124/140/150 MHz system bus speeds

(PCI 44MHz) (reserved)

Memory Ÿ 3 168-pin DIMM sockets.

Ÿ Supports PC-100 / PC-133 SDRAM and VCM SDRAM

Ÿ Supports up to 1.5GB(Max)

Ÿ Supports only 3.3V SDRAM DIMM

Ÿ Supports 72bit ECC type DRAM integrity mode.

I/O Control Ÿ VT82C686A

Slots Ÿ 1 AGP Slot Supports 4X mode & AGP 2.0 compliant

Ÿ 5 PCI Slot Supports 33MHz & PCI 2.2 compliant

Ÿ 1 ISA Slot

Ÿ 1 AMR(Audio Modem Riser)Slot

On-Board IDE Ÿ Supports PIO mode 3, 4 (UDMA33/ATA66) IDE &

ATAPI CD-ROM

Ÿ 2 IDE bus master (DMA 33/ ATA 66) IDE ports for up

to 4 ATAPI devices

On-Board

Peripherals Ÿ

1 floppy port supports 2 FDD with 360K, 720K,1.2M,

1.44M and 2.88M bytes

Ÿ 1 parallel ports supports EPP/ECP mode

Ÿ 2 serial ports (COM A & COM B)

Ÿ 4 USB ports

Ÿ 1 IrDA connector for IR

To be continued…

Summary of Features

4

Hardware Monitor Ÿ CPU / System fan revolution detect

Ÿ CPU / System temperature detect

Ÿ System voltage detect

Ÿ CPU overheat shutdown detect

PS/2 Connector Ÿ PS/2 keyboard interface and PS/2 mouse interface

BIOS Ÿ Licensed AMI BIOS, 2M bit flash ROM

On-Board Sound Ÿ Build –in VIA sound (VIA VT82C686A)

Ÿ Creative CT5880 sound (Optional)

Additional Features Ÿ Supports Wake-on-LAN (WOL)

Ÿ Supports Internal / External modem wake up

Ÿ Includes 3 fan power connectors

Ÿ Poly fuse for keyboard over-current protection

Ÿ Support STR (Suspend to RAM ) function

Ÿ Support USB KB/MS Wake up From S3~S5

6VX7-4X Motherboard

5

6VX7-4X Motherboard Layout

PCI2

PCI3 VT82C686A

PS/2

SW1

PCI4

PCI5

ISA

SW2

AGP

AMR

JP16

6VX7-4X

PCI1

BAT1

PGA 370

CPU

JP9

JP19

JP30

JP15

JP5

USB1

J11

JP23

JP1

J3

JP2

J4

J12

JP22

J2

BIOS

JP20

Creative

CT5880

BZ1

JP8

JP7

JP18

J7

J8

VT82C694X

USB2

J1

LED1

JP24

6VX7-4X Motherboard Layout

6

$

Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition

Page

CPU Speed Setup P.7

Connectors P.17

Game & Audio Port P.17

COM A / COM B / LPT Port P.17

USB1 Connector P.18

PS/2 Keyboard & PS/2 Mouse Connector P.18

JP16 (CPU Fan) P.19

JP15 (Power Fan) P.19

JP2 (System Fan) P.20

ATX Power P.20

USB 2 Connector P.21

IR Connector P.21

Floppy Port P.22

IDE 1(Primary)/ IDE 2(Secondary) Port P.22

J3 (Ring Power On) P.23

J1 (Wake on LAN) P.23

J7 (TEL) P.24

J5 (AUX_IN) P.24

J8 (CD Audio Line In) P.25

JP5 (STR LED Connector) & LED 1 (DIMM LED) P.25

Front USB Port (Optional) P.26

J11 (SM BUS) P.26

Panel and Jumper Definition P.27

J2 (2x11 Pins Jumper) P.27

JP1 (Clear CMOS Function) P.28

JP18/JP7/JP8 (Onboard AC97& AMR Select) P.28

JP11 (STR Enable) P.29

JP20 (Onboard Sound Function Selection) [Optional] P.29

JP24 (Normal/Recovery) [Optional] P.30

JP19 (Cyrix CPU Turbo Function) [Optional] P.30

JP9 (USB Device Wake up Selection) P.31

JP23 (Case Open) P.31

JP22 (BIOS Flash Write Protection) P.32

JP30 (Over Voltage CPU Speed up) [Optional] P.32

J12 (Front Panel Jumper) [Optional] P.33

BAT1 (Battery) P.33

6VX7-4X Motherboard

7

CPU Speed Setup

The system bus speed is selectable at 66,100,133MHz and Auto. The user can select the

system bus speed (SW1) and change the DIP switch (SW2) selection to set up the CPU speed

for 500MHz – 1GHz processor.

SW1:

O: ON, X: OFF

CPU PCI CLK 1 2 3 4 5 6

Auto 33.3 X X X X O O

66 33.3 O O X X X X

75 37.5 O O O X X X

83 41.6 O O X O X X

100 33.3 O X X X X X

112 37.3 O X O X X X

124 31 X X X O X X

133 33.3 X X X X X X

140 35 X X O O X X

150 37.5 X X O X X X

M

The CPU speed must match with the frequency RATIO. It will cause system hanging

up if the frequency RATIO is higher than that of CPU.

SW2:

DIP SWITCH

FREQ. RATIO 1 2 3 4

X 3

O

X

O

X 3.5

X

O

X 4

O

X

O

X 4.5

X

O

X

O

X 5

O

X

O

X 5.5

X

O

X 6

O

X

X 6.5

X

O

X

X 7

O

X

O

X

X 7.5

X

O

X

X 8

O

X

X 8.5

X

O

X

X 9

O

X

X 9.5

X

X 10

O

X 10.5

X

O

CPU Speed Setup

8

F

For Auto Jumper setting:

6V

SW1

ON

1

2

3

4

5

6

«

Note:

1. If you use 66, 100, 133 MHz CPU, we recommend you to set up your system speed to

“Auto” value.

2. We don’t recommend you to set up your system speed to 75,83,112, 124, 140,150 MHz

because these frequencies are not the standard specifications for CPU, Chipset and

most of the peripherals. Whether your system can run under 75,83,112, 124, 140,150

MHz properly will depend on your hardware configurations: CPU, SDRAM, Cards, etc.

1. CeleronTM 533 / 66MHz FSB

6V

SW2

ON

1

2

3

4

SW1

ON

1

2

3

4

5

6

6VX7-4X Motherboard

9

2. Celeron TM 566 / 66 MHz FSB

3. Celeron TM 600 / 66 MHz FSB

4. Celeron TM 633 / 66 MHz FSB

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

CPU Speed Setup

10

5. Celeron TM 667 / 66 MHz FSB

6. Celeron TM 700 / 66 MHz FSB

7. Cyrix® III 550 / 100 MHz FSB (Optional)

SW1

ON

1

2

3

5

4

6

SW2

ON

1

2

3

4

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

SW1

ON

1

2

3

5

4

6

SW2

1

2

3

4

6VX7-4X Motherboard

11

8. Cyrix® III 533 / 133 MHz FSB (Optional)

9. Cyrix® III 600 / 133 MHz FSB (Optional)

10. Pentium® !!! 500 / 100MHz FSB

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

SW1

ON

1

2

3

5

4

6

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

SW2

ON

1

2

3

4

CPU Speed Setup

12

11. Pentium® !!! 550 / 100MHz FSB

12. Pentium® !!! 600 / 100MHz FSB

13. Pentium® !!! 650 / 100MHz FSB

SW2

ON

1

2

3

4

SW2

ON

1

2

3

4

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

SW1

ON

1

2

3

5

4

6

SW1

ON

1

2

3

5

4

6

6VX7-4X Motherboard

13

14. Pentium® !!! 700 / 100MHz FSB

15. Pentium® !!! 750 / 100MHz FSB

16. Pentium® !!! 800 / 100MHz FSB

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

SW2

ON

1

2

3

4

SW1

ON

1

2

3

5

4

6

Page is loading ...

Gigabyte GA-6VX7-4X Owner's manual

This manual is also suitable for

Gigabyte GA-6VX7-4X Owner's manual

Related papers

Other documents