2. Potter
  3. QDC-2

Potter QDC-2 Owner's manual

  • Hello! I've reviewed the datasheet for the amseco QDC-2 Quick Disconnect Cord. This document specifies the cord's application for overhead doors and gates, its robust construction, and its electrical specifications. I'm ready to answer any questions you have about the product.
  • What is the QDC-2 Quick Disconnect Cord designed for?
    What is the contact rating of the QDC-2?
    What is the wire size of the QDC-2?
QDC-2
QUICK DISCONNECT CORD
Potter Electric Signal Co., LLC • St. Louis, MO • Cust Service: 866-240-1870 • Tech Support:866-956-1211• Canada 888-882-1833 • www.pottersignal.com
MKT. #8880106 - REV B
2/10
PAGE 1 OF 1
PRINTED IN USA
A Brand
• UL listed
• Heavy duty cables
• Non-ferros metal blades
• Stainless steel sash chains
• Corrosion resistant contacts
• Overall length approx. 21”
• Mounting block - epoxy potted for low resistance
Application
The QDC-2 Quick Disconnect Cord is designed for use on overhead doors, gates, and any other opening that cannot be protected by other
methods. The QDC-2 is designed to provide years of reliable service. It incorporates a proven design with heavy duty corrosion resistant
contacts. The rugged connector system and heavy duty cables will withstand the harshest treatment and environments. It is suitable for both
indoor and outdoor applications. The heavy duty cables have successfully withstood bending cycle test of over 2000 cycles.
Specications
Model Stock
Number Contact Rating Wire Size
QDC-2 4300020 1 Amp @ 24VDC
18 AWG
2 conductor
PVC
Insulated/jacketed
firealarmresources.com
/