PLASTICADE 800-RB-60-1PK Owner's manual

Brand
PLASTICADE
Model
800-RB-60-1PK
Type
Owner's manual

This manual is also suitable for

PLASTICADE 800-RB-60-1PK is a sign stand with a 60 lb. recycled rubber base, designed for durability and stability in various outdoor conditions. Its key capabilities include:

  • Enhanced Wind Resistance: The square Power Post provides 15% greater wind resistance compared to round posts, ensuring your signs stay upright even in strong gusts.

  • Durable Construction: The impact-resistant post with reinforcing center crossbars ensures stability and longevity, while the rubber base resists chipping, cracking, and crumbling.

  • Easy Handling: Molded-in hand-grips on the base allow for convenient lifting and portability.

PLASTICADE 800-RB-60-1PK is a sign stand with a 60 lb. recycled rubber base, designed for durability and stability in various outdoor conditions. Its key capabilities include:

  • Enhanced Wind Resistance: The square Power Post provides 15% greater wind resistance compared to round posts, ensuring your signs stay upright even in strong gusts.

  • Durable Construction: The impact-resistant post with reinforcing center crossbars ensures stability and longevity, while the rubber base resists chipping, cracking, and crumbling.

  • Easy Handling: Molded-in hand-grips on the base allow for convenient lifting and portability.

Plasticade.com
TF048 Rev. 4
● Three sizes, 30 lbs., 60 lbs., and 90 lbs.
- durable, thick, recycled rubber
- stack 30 lb. and 60 lb. for 90 lb. base
● Won’t chip, crack, or crumble
- resistant to weather, oil, salt, moisture, UV light, and temperature
● Molded-in Hand-grips make bases easy to pick up
● Optional wheels make moving signs even easier
- polyurethane lined wheels are durable, quiet, and rust free
- zinc plated hardware
● Made in the U.S.A.
Sold in Sets
Rubber Base with
Plastic Square Power Post™
PLASTICADE® SIGN STANDS WITH RUBBER BASES
OPTIONAL
WHEELS
comes with two double wheel
assemblies installed
30 lbs.30 lbs. 60 lbs.
90 lbs.
● Reinforced plastic square post is stronger and more stable than round
- 15% greater wind resistance than round posts
- 10 times more surface area contact between sign and post
- no sign twisting on post, no post rotating in base
- impact resistant post has reinforcing center crossbars
● Lightweight and will never rust
● Pre-drilled holes for multiple sign sizes
● Mounting hardware included
● Available in white, custom colors with minimum order quantity
The Power Post™ Advantage
SQUARE
POWER POST™
ADVANTAGE
15% Greater
Wind Resistance
than Round Posts



Strong Plastic Post
with Reinforcing
Center Crossbars
Sign Sits Flat Against
Square Post



MADE IN THE USA
Post Size:
60” long, 1.75” wide
Posts come with holes drilled
100 Howard Avenue
Des Plaines, IL 60018
phone (800) 772-0355
fax (847) 966-8074
Plasticade.com
Hand-grip
Indents for bolt that
holds post in place
Underside of BaseUnderside of Base
With Post Installed
Hardware Provided:
3 ea. Hex Bolt Zinc 3/8 x 2-1/2
5 ea. Washer 3/8
3 ea. Locknut 3/8-16
To secure post to base: use 1 hex bolt, 1 locknut, and 1 washer
To secure sign: use 2 hex bolts, 2 locknuts, and 4 washers
18.5”
18.5”
Hole is 1.75” square
30 lb. base is 2.5”H
60 lb. base is 5”H
90 lb. base (bases stacked) 7.5”H
22.85”
3” Diameter
Wheels
Sign Sizing Guide
30 lb. base: use with signs 12”W x 18”H or smaller
60 lb. base: use with signs 24” x 24” or smaller
90 lb. base: use with signs larger than 24” x 24”
7/16”
1”
10”
13”
16”
19”
22”
11.5” from bottom of post
use to secure post to base
Inches from
top of post
1” from bottom of post
Hole Placement On Post
Convert Rubber Bases To Accept U-Channel
U-Channel Adapter for 30 lb. & 60 lb. Rubber Bases
● Steel adapter is powder coated black
● Fits our 30 lb. and 60 lb. recycled rubber bases,
with square center hole
● Use with bases with or without wheels
● Adapter kit comes with hardware to attach
your U-Channel to adapter
● 12”H, 1.5 lbs.
Adapter
  • Page 1 1
  • Page 2 2

PLASTICADE 800-RB-60-1PK Owner's manual

Brand
PLASTICADE
Model
800-RB-60-1PK
Type
Owner's manual
This manual is also suitable for

PLASTICADE 800-RB-60-1PK is a sign stand with a 60 lb. recycled rubber base, designed for durability and stability in various outdoor conditions. Its key capabilities include:

  • Enhanced Wind Resistance: The square Power Post provides 15% greater wind resistance compared to round posts, ensuring your signs stay upright even in strong gusts.

  • Durable Construction: The impact-resistant post with reinforcing center crossbars ensures stability and longevity, while the rubber base resists chipping, cracking, and crumbling.

  • Easy Handling: Molded-in hand-grips on the base allow for convenient lifting and portability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents