Ringway RS400 User manual

Category
Supplementary music equipment
Type
User manual
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings,install in accordance with the manufacturer s instructions.
8) Do not install near any heat sources such as radiators, heat registers,stoves,or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug.A polarized plug has two
blades with one wider than the other.A grounding type plug has two blades and a third grounding
prong.The wide blade or the third prong is provided for your safety.If the provided plug does not fit into
your outlet,consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs.convenience
receptacles,and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart,stand,tripod,bracket,or table specified by the manufacturer,or sold with the
apparatus.When a cart is used,use caution when moving the cart/apparatus combination to avoid injury
from tip-over (Figure 1).
13) Unplug this apparatus during lightning storms or when unused for a long periods of time.
14) Refer all servicing to qualified service personnel.Servicing is required when the apparatus has
been damaged in any way,for example power-supply cord or plug is damaged,liquid has been spilled ,
objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not
operate normally,or has been dropped.
WARNING:To reduce the risk of fire or electric shock,do not expose this apparatus to
rain or moisture.
CAUTION:Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids,such as vases,shall be placed on the apparatus.
(Figure 1)
Thank you for purchasing this digital instrument.For perfect operation and security,please
read the manual carefully and keep it for future reference.
Precaution
Safety Precautions
Important Safety Instructions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning flash with arrowhead symbol within an equilateral triangle is in
tended to alert the user to the presence of uninsulated dangerous voltage
within the product s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance(servicing) instructions in
the literature accompanying the product.
Thanks for using our electronic organ
Our electronic organ is a high-quality organ with touch sensitivity key board and
combines the most advanced PCM tone generation technology.
Large back lit LCD display and easy-to-use also greatly enhances the operability
of this advanced instrument.
In order to obtain maximum performance and enjoyment, please read this
manual thoroughly while trying out the various features described.
Contents
Panel Controls...................................................................
Main Controller Layout.....................................................
Connectors.........................................................................
...............................................................
Use Headphones.............................................................
Line Out...........................................................................
Line In................................................................. ............
MIDI IN / MIDI OUT.........................................................
Basic Operation.................................................................
Power Switch...................................................................
Set the Volume................................................................
..................................................
Play Demo.......................................................................
Factory Set......................................................................
Voice...................................................................................
...................................................
Lead Voice......................................................................
.................................................
..................................................
Voices controller..............................................................
1.Volume........................................................................
2.Pan..............................................................................
3.Tune............................................................................
4.Transpose..................................................................
5.Octave........................................................................
6.Attack.........................................................................
7.Decay.........................................................................
8.Release......................................................................
9.Vibrato rate.................................................................
10.Vibrato depth............................................................
11.Vibrato delay.............................................................
12.Resonance...............................................................
13.Cut.Freq...................................................................
Effect................................................................................
1. ...............................................................
2. ...........................................................
............................................................
...............................................................
..............................................
...........................................
7. ........................................
8. ...............................................................
............................................................
............................................... .
.....................................................
............................................................
.............................................................
...........................................................
15. .........................................
16. .....................................
Accompaniment............................................
1. ...............
..........................................................
...........................................................................
................................................... ..........
......................................................... ...... .....
................................................................... ...........
..................................
Using AC power
Rhythm Volume
Start
Using Expression Pedal
Upper Keyboard Voices
Lower Keyboard Voices
Pedal Keyboard voices
Reverb Type
Reverb PreLPF
3.Reverb Mlevel
4.Reverb Time
5.Reverb Dely Feedback
6.Reverb Send Level Voice
Reverb Send Level-Rhythm
Chorus Type
9.Chorus PreLPF
10.Chorus Master Level
11.Chorus Feedback
12.Chorus Delay
13.Chorus Rate
14.Chorus Depth
Chorus Send Level Voice
Chorus Send Level Rhythm
Synchro Start
Intro/End
Fill
3.Adjust Accompaniment Volume
Automatic
Selecting rhythms with the Rhythm buttons
2.
Chord Volume
Volume
Bass Volume
Harmony Volume
4.Fingered
Custom
Memory Lower
Memory Pedal
5.Tempo
6.Rhythm Sequence
Master Transpose
USB Transpose
3.Others
F.Pitch Setting
MIDI Out
F.Other1
F.Other2
4.Touch
Storing registration
2.Selecting Registrations
3.Using the [D] (Disable) button
4.Saving the Registration data to USB disk...............
5.
Registration Shift
Recording
2.Rework Recording
3.Set Track
USB Control
1.USB File
2.Delete File
5.Up Date
................................................................
Percussion ........................................ ...............
.................................................................
..........................................................
.......................................................................
.........................................................................
............................................ ..................
...............................................................
...........................................................................
............................................ ............
Insert Rhythm Number..................................................
Delete rhythm number...................................................
Delete all rhythm sequence setting...............................
Use rhythm sequence..................................... ..............
7.Percussion....................................................................
Select Percussion Voice..................................... ..........
Setting Percussion Shift.......................... ..... ..... ...........
Function.............................................................................
1.Mode.......................................................... ..... .............
Normal..........................................................................
Mixer.............................................................................
Reg Shift.......................................................................
2. ................................... ......................
.............................................................
...........................................................................
............................................ ...................
F.FootSW................................................... ...................
Lock..............................................................................
.......................................................................
........................................................................
......................................................................
............................................................................
Registration Memory....................................... ..................
1. ........................................................
......................................... ........
................................ .......
.......
Save the registration data to the Organ..........................
6. ...........................................................
Recorder...................................................................... .......
1. ........................................................... ..........
............................................. ...........
..................................................... ......... ........
.................................................... ....... ............
............................................................. ..........
.................................................. ..................
3.Play MIDI File................................................. ..............
4.USB Volume..................................................................
.........................................................................
Foot.Switch.........................................................................
Appendix................................................................. ...........
Chord List..................................................... ...................
Voice List.........................................................................
Percussion List............................................ ....................
Style List..........................................................................
.............................. ................
Specifications.................................................. ................
Troubleshooting...............................................................
MIDI Implementation Chart
1
2
4
4
4
5
5
5
6
6
6
6
6
7
8
8
8
9
9
10
10
10
10
11
11
11
12
12
12
13
13
13
14
15
15
15
15
16
16
16
17
17
17
18
18
18
19
19
19
20
21
21
21
21
21
22
22
22
22
23
23
23
24
24
24
24
25
25
26
26
26
26
26
27
27
28
28
28
28
29
30
30
30
30
31
31
32
33
35
36
37
37
37
37
37
38
39
41
41
41
41
44
44
44
44
45
45
46
47
47
48
51
55
57
58
59
1
Panel Controls
1
11
3
PITCH BEND
PCMPCM
PCMPCM
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
2
4
10
9
8
7
6
5
12 13 14 15
USB DISK
LEAD VOICE
PEDAL
DANCE8/16 BEAT
POWER
USB TO DEVICE
UPPER KEYBOARD
MIDI
REG
DRV
INSERT DELETE
A.B.C./M.O.C.
CLEAR
OTHERS
EFFECT
SEQ
MODE
CONFIRM
ITEM
/PAGE
DATA
REG SHIFT
LOWER KEYBOARD
PIANO
/CHORUS
ORGAN GUITAR
/BASS
STRINGS BRASS
LEAD/PAD SYNTH CHINESE
/PIPE
REED
SUSTAIN
VOICE
/WORLD
PERCUSSIVE
/SOUND EFFECT
V
O
L
U
M
E
PIANO
/CHORUS
ORGAN GUITAR
/BASS
STRINGS BRASS
LEAD/PAD CHINESE
/PIPE
REED
SUSTAIN
VOICE
PERCUSSIVE
/SOUND EFFECT
V
O
L
U
M
E
/WORLD
SYNTH
FUNCTION
CONTRA.BASS
1
SUSTAIN
ELEC.BASS
VOICE
TOLOWER
V
O
L
U
M
E
REVERB PERCUSSION
DISCO
1
SEQ 1
/BALLAD
COUNTRY LATIN TRADITIONAL WALTZ
SEQ 2
SWING&JAZZ
/R&B
LOWER
PEDAL
RHYTHM
V
O
L
U
M
E
V
O
L
U
M
E
1
TRUMPET
FLUTE
TOLOWER
RHYTHM CONTROL
FINGERED CUSTOM M.LOWER M.PEDAL INTRO/END FILL MAIN A MAIN B
PAUSE PLAY SELECT M.REC REC
SHIFT FILE TYPE VOLUME DELETE SET
SYNC
START
MAIN VOLUME
MIN MAX
TEMPO
1. POWER
2. MAIN VOLUME
3. REVERB
4. RHYTHM
5. UPPER KEYBOARD
6. LOWER KEYBOARD
7. LCD DISPLAY
8. DATE CONTROL
9. DATA +/-
CONFIRM
ITEM/PAGE +/-
10. FUNCTION
11. PEDAL
12. RHYTHM CONTROL
13. USB DISK
14. TEMPO +/-
SYNC
START
15. PITCH BEND
2
Upper Keyboard
Registration
Lower Keyboard
Right Foot-switch
Left Foot-switch
Expression Pedal
Pedal Keyboard
Key Cover
Main Controller Layout
3
LCD display
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
6
6
m
m
Page
Rhythm
Lead Voice
Pedal Voice 2
Pedal Voice 1
Lower Voice 2
Lower Voice 1
Upper Voice 2
Upper Voice 1
Effect Display
4
Connectors
Using AC power
Use Headphones
A standard pair of stereo headphones can be plugged into the phones1 or phones2 jack
for private practice or late-night playing. The inernal speaker system is automatically shut
off when the headphones is plugged into the phones jack.
Tips of Using Electrical Safety
Make sure the switch is off before you put the plug into the socket
Must use a reliable grounding the power, the power to embed the earth, can not
connect to water pipe, and other public facilities, Distinguish power landlines and
neutral, not put the two wires connected together.
Must use a separate special socket, plug the national 3C authentication should be
qualified products.
For your personal safety and the product, please use the normal use of compliance
with this product power input and reliable grounding power, otherwise fuselage will
be charged, when in contact with the fuselage may produce linen and painful mild
electric shock feeling.
Line Out
Your instrument has two line out jacks , Line out/R(R+L), and Line out/L.
Used to send the audio signal out to an external amplifier, mixer console or recording
equipment. To connect the instrument in stereo to an external amplification system connect
both left and right outputs.
LINE OUT
/R(R+L) LINE OUT/L
Line In
The audio output from other sound system connected to the LINE IN jack on the rear
panel can be mixed with the sound of the unit. This function is convenient when you want
to play along with a favourite song. Line In volume can be set by vol knob.
5
MIDI In / MIDI Out
Midi in---receive midi data from an external midi device.
Midi out---transmit midi data generated by your instrument.
LINE IN
6
Basic Operation
Power Switch
Turn the power on by pressing the Power switch, the panel LCD display will show:
U-1 GrandPno
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
6
6
m
m
POWER
Set the Volume
Set the [MAIN VOLUME] to appropriate position
between the MIN and MAX.
MIDI
REG
DRV
MAIN VOLUME
MIN MAX
Using Expression Pedal
After setting the master volume you can use the
expression pedal to control volume while playing.
Play Demo
You can press [PLAY] button to listen it without plug USB disk.
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
PAUSE SELECT
PLAY
MIDI
REG
DRV
Press [PLAY] button again to stop playing.
7
Factory Set
Press [SHIFT] button , and hold then press 5 button.
SHIFT
5
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
MIDI
REG
DRV
Press [ ] button , it can restore current 16 registrations to factory set. CONFIRM
8
Voice
Upper Keyboard Voices
Upper Keyboard Voice 1 and Upper Keyboard Voice 2 can be selected from the
panel's Upper Keyboard Voice 1/2 section.
Lead Voices
Lead Voice can be selected from the panel's Lead Voice section.
PIANO
/CHORUS
ORGAN GUITAR
/BASS
STRINGS BRASS
LEAD/PAD SYNTH CHINESE
/PIPE
REED
SUSTAIN
UPPER KEYBOARD
/WORLD
PERCUSSIVE
/SOUND EFFECT
V
O
L
U
M
E
VOICE
LEAD VOICE
V
O
L
U
M
E
1
TRUMPET
FLUTE
TOLOWER
Press [TOLOWER] button to turn on the indicator lamp , you can play Lead Voice on lower
keyboard.
Press [TOLOWER] button to turn off the indicator lamp , you can play Lead Voice on upper
keyboard.
Press [VOLUME UP/DOWN] buttons to adjust the current Lead voice volume.
LEAD VOICE
V
O
L
U
M
E
1
TRUMPET
FLUTE
TOLOWER
Press [VOICE] button to turn on the indicator lamp , you can select Upper Keyboard Voice 2.
Press [VOICE] button to turn off the indicator lamp , you can select Upper Keyboard Voice 1.
Press voice group button(such as STRINGS ) ,then use DATA +/- or data dial to
select your needed voice.
Press [VOLUME UP/DOWN] buttons to adjust the current upper voice volume.
Press [SUSTAIN] to turn on/off the current voice's sustain-effect.
9
Pedalboard Voices
Voices for each section can be selected from the panel's Pedal Voice 1/2 section.
Lower Keyboard Voices
Voices for each section can be selected from the panel's Lower Keyboard Voice section.
LOWER KEYBOARD
PIANO
/CHORUS
ORGAN GUITAR
/BASS
STRINGS BRASS
LEAD/PAD CHINESE
/PIPE
REED
SUSTAIN PERCUSSIVE
/SOUND EFFECT
V
O
L
U
M
E
/WORLD
SYNTH
VOICE
Press [VOICE] button to turn on the indicator lamp , you can select Lower Keyboard Voice 2.
Press [VOICE] button to turn off the indicator lamp , you can select Lower Keyboard Voice 1.
Press [VOLUME UP/DOWN] buttons to adjust the current lower voice volume.
Press [SUSTAIN] to turn on/off the current voice's sustain-effect.
PEDAL
CONTRA.BASS
1
SUSTAIN
ELEC.BASS TOLOWER
VOICE
V
O
L
U
M
E
Press [VOICE] button to turn on the indicator lamp , you can select Pedal Keyboard Voice 2.
Press [VOICE] button to turn off the indicator lamp , you can select Pedal Keyboard Voice 1.
Press [VOLUME UP/DOWN] buttons to adjust the current pedal voice volume.
Press [SUSTAIN] to turn on/off the current voice's sustain-effect.
Press [TOLOWER] button to turn on the indicator lamp , you can play Pedal Voice on lower
keyboard.
Press [TOLOWER] button to turn off the indicator lamp , you can play Pedal Voice on Pedal
keyboard.
10
Voices controller
1.Volume
Press [ITEM/PAGE +] button, select Volume , then press [DATA +/-] button or use the
data dial to adjust voice’s volume, Range: 00-127
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
MIDI
REG
DRV
CONFIRM
ITEM
/PAGE
DATA
2.Pan
Press [ ] button, select Pan , then press [DATA +/-] button or use the
data dial to adjust voice’s pan, Range: 00-127
ITEM/PAGE +
CONFIRM
ITEM
/PAGE
DATA
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
MIDI
REG
DRV
3.Tune
Press [ ] button, select Tune , then press [DATA +/-] button or use the
data dial to adjust voice’s tune, Range: 00-127
ITEM/PAGE +
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
After your select voice, you can adjust current voice's parameters.
11
4.Transpose
Press [ ] button, select X.Pose , then press [DATA +/-] button or use the
data dial to Range: -6~6
ITEM/PAGE +
change the setting.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
5.Octave
Press [ ] button, select Ocatve , then press [DATA +/-] button or use the
data dial to Range: -2~2
ITEM/PAGE +
change the octave value.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
6.Attack
Attack time. This is the time during which the sound goes from zero to it s maximum level.
Press [ ] button, select Attack , then press [DATA +/-] button or use the
data dial to Range: 00~127
ITEM/PAGE +
change the setting.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
12
7.Decay
Decay time. Time from the final Attack level to the beginning of the Sustain.
Press [ ] button, select Decay , then press [DATA +/-] button or use the
data dial to Range: 00~127
ITEM/PAGE +
change the setting.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
8.Release
Release time. time during which the sound goes from the sustaining phase, to zero.
Press [ ] button, select Release , then press [DATA +/-] button or use the
data dial to Range: 00~127
ITEM/PAGE +
change the setting.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
9.Vibrato Rate
Speed of the vibrato effect.
Press [ ] button, select Vib-rate , then press [DATA +/-] button or use the
data dial to set vibrato rate Range: 00~127
ITEM/PAGE +
.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
13
10.Vibrato Depth
The intensity of the vibrato effect.
Press [ ] button, select Vib-dpth , then press [DATA +/-] button or use the
data dial to set vibrato depth Range: 00~127
ITEM/PAGE +
.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
11.Vibrato Delay
Delay time from playing a key to the start of the vibrato effect.
Press [ ] button, select Vib-dlay , then press [DATA +/-] button or use the
data dial to set vibrato delay Range: 00~127
ITEM/PAGE +
.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
12.Resonance
Emphasizes the portion of the sound in the region of the cutoff frequency.
Press [ ] button, select Resonance , then press [DATA +/-] button or use
the data dial to set voice’s resonance Range: 00~127
ITEM/PAGE +
.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
14
13.Cut.Freq
Frequency at which the filter begins to have an effect on the waveform s frequency
components
Press [ ] button, select Cut.Freq , then press [DATA +/-] button or use
the data dial to Range: 00~127
ITEM/PAGE +
change the setting.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
15
Effect
1.Reverb Type
Press [ITEM/PAGE +] button, select R.Type , then press [DATA +/-] button or use
the data dial to select reverb type(00Room 1; 01Room 2; 02Room 3; 03Hall 1; 04Hall 2;
05Plate; 06Delay; 07Pan Delay).
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
2.Reverb PreLPF
Press [ITEM/PAGE +] button, select R.PreLPF , then press [DATA +/-] button or use
the data dial to set low pass filter. Range: 00~07
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
3.Reverb M.level
Press [ITEM/PAGE +] button, select R.MLevel , then press [DATA +/-] button or use
the data dial to set reverb master level. Range: 00~127
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
This function allows you to perform the overall sound in a realistic style.
After power on, effect function is open, [EFFECT] buttotn s indicator lamp is light, press
this button to turn on or off [EFFECT] function.
16
4.Reverb Time
Press [ITEM/PAGE +] button, select R.Time , then press [DATA +/-] button or use the
data dial to set reverb time. Range: 00~127
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
5.Reverb Delay Feedback
Press [ITEM/PAGE +] button, select R.DlyFdk , then press [DATA +/-] button or use the
data dial to set reverb delay feedback. Range: 00~127
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
6.Reverb Send Level Voice
Press [ITEM/PAGE +] button, select R.U1Levl , then press [DATA +/-] button or use the
data dial to change the setting.
CONFIRM
ITEM
/PAGE
DATA
MIDI
REG
DRV
6
6
m
m
VOLUME PAN TUNE TRANSPOSE OCTAVE ATTACK DECAY RELEASE
R.U1Levl----- Upper Keyboard Voice 1's reverb send level.
R.U2Levl----- Upper Keyboard Voice 2's reverb send level.
R.LDLevl----- Upper Keyboard Lead Voice's reverb send level.
R.L1Levl------ Lower Keyboard Voice 1's reverb send level.
R.L2Levl------ Lower Keyboard Voice 2's reverb send level.
R.P1Levl------ Pedal Voice 1's reverb send level.
R.P2Levl------ Pedal Voice 2's reverb send level.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Ringway RS400 User manual

Category
Supplementary music equipment
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI