Ronix 2211V User manual

Type
User manual

Ronix 2211V is a power tool designed for drilling holes in various materials, including steel and wood. It features a 600W motor, a variable speed range of 0-3000 RPM, and a 13-30mm chuck capacity. This tool is suitable for tasks such as:

  • Drilling holes in steel with a maximum diameter of 13mm
  • Drilling holes in wood with a maximum diameter of 20mm
  • Driving screws Overall, the Ronix 2211V is a versatile and powerful tool that can be used for a wide range of drilling and driving applications.

Ronix 2211V is a power tool designed for drilling holes in various materials, including steel and wood. It features a 600W motor, a variable speed range of 0-3000 RPM, and a 13-30mm chuck capacity. This tool is suitable for tasks such as:

  • Drilling holes in steel with a maximum diameter of 13mm
  • Drilling holes in wood with a maximum diameter of 20mm
  • Driving screws Overall, the Ronix 2211V is a versatile and powerful tool that can be used for a wide range of drilling and driving applications.
IMPACT DRILL
2211V
USER MANUAL 1
SPECIFICATION
Model No. 2211V
Rated power input 600W
Rated voltage 110V~60Hz
No-load speed 0-3000/min-1
Chuck capacity 13-30mm
Max. drilling in steel 13mm
Max. drilling in wood 20mm
PARTS LIST
Switch for Hammer
Drilling/Drilling
Lock
Button
Operating Switch
With Speed
Regulare Wheel
Second
Handle
Depth
Guide
Drill Chunck
SAFETY INSTRUCTIONS
Basic safety regulations, the code for the product to avoid an accident,
please read carefully.
IMPACT DRILL
2
.WORK PLACE
1) Keep work place clean and bright, Chaos and dark eld can cause
accidents
2) Don’t in explosive environment, if there are ammable liquids, gases or
dust environment operating the machine.
Machine sparks can ignite the dust and gas.
3) Let children and bystanders left machine operation. Distractions can
make you loose control.
.ELECTRICAL SAFETY
1) The machine plug must be matched with the socket. Must not be
modied in any way plug. Grounding machine
Can not use any conversion plug. Without modication of plugs and
matching socket will reduce the shock hazard.
2) Avoid human contact surface of the ground. Such as pipe, heat sink, and
refrigerators, if you body grounding will increase the risk of electric shock.
3) The machine must not be exposed in the rain or damp environment,
water into the machine will increase the risk of electric shock.
4) Shall not abuse the wire. Wires must not be carrying, pull the machine
or pull out the plug. Let the machine away from Heat oil , edges or moving
parts. Damaged or coil of wire will increase the risk of electric shock.
5) When the machine outdoor use, se external wire suitable for outdoor
line. Suitable for outdoor use lines will reduce the shock hazard.
.PERSONAL SAFETY
1) Stay alert, when operating the machine in operation and attention is in
stay awake. Do not in tired, drugs, alcohol or treatment response under
operating the machine. During the machine operation energy dispersion
can cause serious personal injury.
2) Use safety equipment. Always wear goggles, Safety devices, such as
the appropriate conditions of dust masks antiskid safety shoes, helmet,
hearing protection devices can reduce personal injury.
3) Avoid sudden starts. Ensure switch when insert the plug is in the
2
USER MANUAL 33
position. Finger on the switch has been switched on or switch is
switched on when inserted into the plug may cause danger.
4) Before the machine on, remove all keys or wrench, Wrench or key
on the legacy in rotating machine parts can cause human hody damage
5) Don’t stretch hand too long, always watch your step and balance. This
accident cases can be a very good control machine.
6) Dress properly, don’t wear loose clothes or wear jewelry, make your
hair, clothes and sleeve away from moving parts. Loose clothing, acces-
sories or long hair may be involved in the moving parts.
7) If you provide the chip removal device dust collection equipment connec-
tion device, make sure they connected in good condition and used properly.
Using this device can reduce the risk of debris caused.
ELECTRIC TOOLS USE AND THE ATTENTION
1) Don’t abuse power tools, according to the application using the appropriate
power tools. Choose the appropriate design rating electric tools will make your
work more effective, safer.
2) If switch tools cannot connect on or off the power and will not be using
the tool. Can’t use the switch to control the electric tools is a dangerous
and must be repaired.
3) On any adjustment, before changing accessories or storage electric tools,
must pull the plug from the power supply or battery box off power supply.
The protective measures to reduce the risk of electric tools suddenly start.
4) Will spare electric tools storage in children and scope, and don’t let not
familiar with electric tools or do not understand these instructions to operate
power tools, Power tools in the hands of untrained user is dangerous.
5) Maintenance of electric tools. Check the installation of the moving part
deviation or gets stuck, parts damage and other conditions affecting the
operation of electric tools. If there are any damage, electric tools must be
repaired before use. Many accidents caused by poor maintenance of electric tools.
6) Keep the cutting tools sharp and clean. Maintain good cutting tool
with a sharp cutting edge not easily jammed and easy to control.
IMPACT DRILL
4
4
7) According to the instruction for us, and intends to use the way of spe-
cial type electric tools requirements, considering the operation condi-
tions and operation to use power tools, accessories and tools of cutting
head, cc. electric tools will be used for those who do not tally with the
requirements of operation may cause dangerous situation.
MAINTENANCE
Send your power tools to the professional maintenance personnel, must
use the same spare parts for replacement This will ensure that the mainte-
nance of the safety of electric tools.
PERFORMANCE AND FUNCTION
Electromagnetic rotary motor or electromagnetic reciprocating small
capacity of motor rotor magnetic eld cutting power operation, through
the drive mechanism drive operation device, driving gear increase the
power of the drill bit, so that the drill bit scraping surface can better into
the object, Electric drill generally applied in the construction industry,
industrial, medical, geological prospecting, etc. The main structure.
.MOTOR
For single-phase series motor ventilation protection on its own. Insulation
for class E. The stator and the armature wire with high strength polyester
lacquer copper wire and through with trapezoidal copper platoon to
thermosetting plastic and mica sheet, as insulating medium. Lectrode
axis between the core and pressure into thermosetting plastics, 6,10,13
mm drill hosing cover plastic engineering plastics, 19,23mm drill in the
aluminum shell is equipped with double insulation structure plastic bushing.
.SWITCH
Adopt the stirrup quickly cut off and has the self-locking device of the
electric drill switch.
USER MANUAL 55
.CAPACITOR
Anti-interference electric drill with a capacitor inside the handle, which
can inhibit tools interference with innite power and television.
.REDUCER
Box shell and middle cover adopt the original compound aluminum alloy die
casting and become, strong and durable, gear for xed gear and the high
frequency heat treatment is not easy to wear.
.THE POWER CORD AND PLUG
Three core cord adopts three pin plug, power cord en outside into the
casing is equipped with insulation sheath to protect the soft line, the
other end connection plug frame and then pressed into plastic (rubber),
made from sealed, power plug , sale and reliable.
.DRILL CHUCK
6,10,13 un using three claw type drill chuck, using three claw type drill chuck
.drill chuck ,please rst remove hole and drilling shaft on the surface of the
forbidden material. Including the antirust wax, and then put the drill chuck
loading shaft can be used.
MAINTENANCE INSTRUCTIONS
Electric voltage should comply with the provisions of the electric drill
nameplate
1) Electric drill before use should be no load running a minute, wait for
rotational normal before use.
2) In the process of operation shall not be too hard and all speed anomalies
or workpiece stuck, should reduce or stop hard. prevent damage to the
motor overload.
3) Keep the commutator surface clean, such as found black mark on the
surface of commutator dirt is more, should remove dirt, brush serious
wear and tear, it should be replaced timely in pairs.
4) Ventilation must be kept clean and smoothness of a drill, prevent
IMPACT DRILL
6
damage of scrap iron or other material into the electric drill internal
components.
5) electric hand drill moves should hold the drill handle, can’t use cable
electric led or hand cable cable from the socket.
6) Transmission of rolling bearing and gear grease always keep clean
and plentiful.
7) Long-term used electric drill, application before use 500V megohmmeter
measureing insulation, resistance between metal shell and winding, the
resistance value should be greater than 2 MQ, otherwise must be
inspection on winding and dry processing.
8) Torque control methods: screw torque adjustment ring up, is the larger the
scale value, the greater the torque. On the other hand, the torsion n-tuning
loop downward spiral, the scale value is smaller, the smaller force.
9) Note: With a electric drill screw must want to press switch system,
its correct position is with your index nger pressure switch system and
unavailable means more pressure.
10) To avoid dust and iron lings from ventilation holes into the drill the rotor
part, don’t pull the power cord, so as not to break, Do not use electric drill
when use hammer percussion, not to impose the impact of the radial drill
shaft part.
11) Electric drill due to ventilation, cooling the long-term use of internal dust,
dust will make gear and bearing lubricating oil mixed with metamorphic
blot aggravate wear, particularly, alternative use. In order to guarantee the
selection of the electric drill precision, reduce because of the bearing wear
and produce too much clearance, so need to clean the fatliquoring and
internal lubrication.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Ronix 2211V User manual

Type
User manual

Ronix 2211V is a power tool designed for drilling holes in various materials, including steel and wood. It features a 600W motor, a variable speed range of 0-3000 RPM, and a 13-30mm chuck capacity. This tool is suitable for tasks such as:

  • Drilling holes in steel with a maximum diameter of 13mm
  • Drilling holes in wood with a maximum diameter of 20mm
  • Driving screws Overall, the Ronix 2211V is a versatile and powerful tool that can be used for a wide range of drilling and driving applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI